art of cannabis

Straight pk the rest of the way, she's greeeen.

She's looking beautiful on her first day of life. Looks like a she's gonna be a good plant, hope to make a nice bush and fill up my room with beautiful sativa bushes in this indoor run. Let's see how she performs 💎💚👨‍🌾

..

I lost a little bit the count on this autoflowers, amazing 3 automatic plants, super powerful genetic, they ended up stinking very loud and the flowrs are just amazing, I'll show the flowers once they're dried! Grown 100% organically with FLO (living soil blend) and water 💦, hope you guys enjoy

Going to start feeding GHE CALiMAGic 2.5ml per gal, and Floraflex V1+V2 at a 1:1 ratio of 1.5 grams per gallon PH 6.1 daily. Also adding a CO2 generator in hopes to promote vigorous growth early on since this is supposed to be a quicker flowering stain. Growers Recharge will be applied once a week on Saturdays from here on out.

Moved into 2x4 - adjusted PPFD from 250 to 190. Light stress. - worried over red Clover mites. Captain Jack’s,

BIG BIG apologies to Heather from fast buds & to Growdiaries & anyone who follows. The past few months have been a massive struggle, not just with temperatures & growing weed but on a personal level. My wife has been very poorly & with covid and everything going on, it's put a massive strain on us all!! I've tries to maintain an active presence on Instagram but that's about all I've physically had time for. I've put this update together today, so far into the grow now it almost seems pointless. I lost my original Mimosa due to high temps & high RH. Moving into the attic at that time of year was a mistake. It has cost me a small fortune to keep things alive. I've had to purchase an air con unit, more fans & just more of everything to be honest. My purple punch is almost ready to harvest, any time within the next couple of days, followed shortly by Bruce Banner & Kosher cake. I wont be winning any awards for this Diary & I feel bad as I was supposed to be show casing what 420 Fast buds has to offer & I've failed...miserably. I hope you can make sense of all the pictures I've included....just a mass photo frenzy over the past few weeks. Thanks to everyone & all your comments. Wishing you all the best. One Love ❤️

I I’m filling a 100l water butt with 250ml each of dutchpro A and B and 150ml of explode in the same brand also used 30ml of rootexcelarator by house an garden and 15ml of x-force by bio green also 5ml of canna version of calmag!

Xs Gonna give it to you

It was a longer road until here. With all the reading I did I still made rookie mistakes. To much nutrients and to much light stunt my plant and created some deficiencies ( CaMg). Hopefully I will do ok from now on.... Lifted the light at 3 feet on 100% power and decreased the PPM’s to 600. Hopefully that will help and I did not create to much damage. Wish me luck. I invested a lot of time and money on this grow but the experience is not there yet. I’m ok with what it is, I’ve learned a lot from this grow.

Going into 36 hour darkness before harvest..🍨

W11F7 8/17-23 HARVEST 8/19 This past week has been rainy and overcast from a tropical storm with temperatures mostly in the upper 80s. We had Hurricane Erin with wind gusts of 30-40 MPH. While we won’t be directly hit by the storm, we will get the outer bands of heavy winds and rain. To protect my plants, I brought all the girls inside on Tuesday in preps for the storm. I inspected each one for bugs, rot or anything unusual. I did not find any bugs or bud rot on AK47. The leaves have some wind burn but that doesn’t affect the plant in any way. Auto AK-47XL is 59 days from germination. Divine Seeds indicates it is ready for harvest from the end of August to early September. 8/19 AK-47XL Auto grew outside until harvest today. I put her in the 3x3 in the dark for 3 days and cut her and hung her on August 23rd. Trichomes were mostly milky with only a few amber so it was time to harvest since AK47 is sativa and I don’t want a sedative effect. The smell is woody and piney with only a hint of citrus. From what I see and smell AK47XL should be a nice wake and bake vape. I can’t wait.

5/07/24 day 15 I was worried with how small she is, I started her a little early for outdoor so she hasn’t been getting proper lighting but she’s not too far behind other plants at this age. Hopefully she’s set her roots deep and is ready to grow upwards 5/11 she’s loves the sun so much. I was worried about her but she’s gonna be fine 🌱 5/12/24 I gave her a tsp of Terp Tea Grow 711. This last week she had grown very well, she has 3 nodes total and is working on more

😇😅🤭🙄

Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️

Super busy with a move and a big garden reno. Sorry, this is the only update for this week

Day 120 - Getting closer to harvest day for this lady. She's huge and full of buds towards the top, smaller somewhat fat buds in the middle, and larfy buds at the bottom. I should have lollipopped her 1 or 2 more nodes up, especially for the colas that did not end up stretching as far as the others. Fed the lady water amended per this week's diary. Still seeing white pistils on her main colas so still 2 weeks away or so from harvest. I think this will be her last full nutrient feeding and for her next watering she'll get her last Cal-Mag feeding. I'll probably do 2 more plain water feedings from there and harvest once the soil is dried out after her last plain water feeding. I'm seeing a few of the lower buds of the lowest colas show some spots on the leaves so I just cut those parts off and hung to begin drying. It doesn't appear to be spreading but I'll keep an eye out these next few days. Day 123 - Fed the lady her last Cal-Mag amended feeding. Trichomes are looking more cloudy now on the middle buds. Will give 1 more plain water feeding instead of 2, I want to see how this bud will smoke with minimal flush versus the first lady harvested that was flushed more. Day 127 - Decided to skip completely flushing her to compare versus an over flushed plant. Harvested her today with the soil nice and dry.