Recommended
Likes
Comments
Share
not sure where the dry weight thing went but i dont fill in wet weight. who even weighs there whole plant? dry yield is 269gram of pure bud. Grown in a 22liter pot with biobizz lightmix soil and greenhousefeeding bio line this smells so hard that my neigbor called the cops. she even smelled it in her apartment so its game over for me because off this plant. never came across such a weed smelling strain in the 8 years that im growing. hope to be back in 6 months or so.
Likes
10
Share
@4Ganic
Follow
This is mid-week four. These pictures are up-to-date taken today. I have LED light so and little other lighting on, so excuse the picture quality. I am no longer using Air, which is an iron supplement. I only used air 2 twice in Veg. Very powerful and boosts growth rate and health.
Likes
8
Share
Bad news! TG1 got mold. I harvested immediately as she was the closest to done and to try to save the other plants from the same fate. Only one bud was moldy, I chopped it and turned it into butter, best decision ever I got so high. TG2 is looking good, smelling good. Just trying to keep humidity down and finish out this grow strong💪
Likes
9
Share
This lady was a little too tall for me to have her in the balcony so we're going mainlain this lady and let's see how many cola we can make from those little 2 main colas, can't risk to have a plant so tall in the balcony guys.
Likes
31
Share
@KitaKush
Follow
78 grams roughly 2.8 oz! Pretty happy with that as I’m looking for quality and potency and no longer quantity and quickness. She has a good amount of frost and super pungent stank radiating off her. Unfortunately for me I had issues with drying and at one point a few hours of 70% humidity which led to a few areas of mold…I threw away those buds and the rest are top notch..probably my most resinous plant harvested so far and strongest smelling. I also grew a runt which will give me less than an ounce now I know it’s just best to call quits on those stumpy odd growing plants and start fresh. Lastly my humidity stayed at 52-56% and I should’ve harvested 1-2 days earlier so the buds are much drier/crispier than I’d like. I’m still trying to find a good drying location..one room had that low humidity and my grow room had way too high at 70..will figure it out eventually. Also 200watt for lighting I can’t go back and change it.
Likes
2
Share
Day 14. Starting off a little slow so lowered the light to experiment. Looking healthy. I plan on doing LST on day 16. Day 16. First day of LST. Day 20. Supercropped the top.
Likes
12
Share
@Pedro_88
Follow
Cómo ven va bien grande mi chemical bride y va creciendo muy bien
Likes
7
Share
@LACREME
Follow
Iniciei a desfoliação! Os ramos estão crescendo, porém lentamente. Senti que a amarra estressou ela e deu uma travada no desenvolvimento. Continuo com a nutrição mista, com GHE e chás orgânicos ricos em microorganismos.
Likes
Comments
Share
@YingYang
Follow
Likes
12
Share
@Haoss
Follow
Buds should be dried in the dark at 22 degrees Celsius and 50% humidity
Likes
8
Share
@Mtmtc
Follow
It harvest time for this lady, my second Jack Herer from Fastbuds. Grown under just 100w from seed to week 10, & On Her final week I’ve managed to put her in my other tent under a 300w led & instead of 48hrs of darkness I left her in 48hrs of light before I harvested. Seed to harvest in 81 days.
Likes
3
Share
3 Days after lollipopping we saw that both runtz are hermaphrodite maybe too much stress but genetics seem to be bad… Now on we check them daily to see if there are any „eggs“ and remove them asap Unfortunately, the brucebanner 3 had a magnesium and calcium deficiency caused by a nutrient blockage. We Head an incorrect PH test. When we checked with another pH test, we found that the pH value was clearly too high at7.5+. Hopefully there will still be something with the harvest… We ordered some calmag and got some ph down by a friend…
Likes
43
Share
🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420
Likes
8
Share
@MG2009
Follow
02/01/2022 Girls looking good potting up this weekend I hope. I wish I labeled them better but I'll be surprised at harvest I think tallest one is jillybean we will see.
Likes
73
Share
@Rwein93
Follow
Ciao ragazzi e bentornati qui con me e la Mimorange🍊😉 Ormai ci siamo quasi! Manca giusto poco più di una settimana. I fiori stanno rallentato la crescita e i colori si stanno diventando più scuri con tonalità violacee.👍 Eh niente ragazzi! Ho pochi dettagli per voi perché sono andato in ferie e ho delegato la fine al mio socio. Spero continui tutto tranquillo.🤞 Grazie a tutti per aver guardato e restate sintonizzati per nuovi aggiornamenti. 🙏 Buona settimana e felice crescita 🌱 🌱🌱
Likes
25
Share
Day 85 25/09/24 Wednesday Feed today using de-chlorinated tap water pH 6 only. Day 87 27/09/24 Friday De-chlorinated tap water pH 6 with Plagron PK13-14 today. Picture and video update 😎 Day 89 29/09/24 Sunday De-chlorinated tap water pH 6 only today. Will start only water next week 👌💚 pictures 😁 Day 91 01/10/24 Tuesday (End of Week)
Likes
16
Share
@Esjey
Follow
Hello, in last week i do it training for my girls: Defoliation HST LST FIM TOPINNG. I hope they will be alive, i do it this all in one week... This is +- 24 day from seed. Smoke weed every day ✌️
Likes
13
Share
The week is on the day 2 and 3 , these two lady's,are amazing like the name Said fast really fast and the amazing looking of the baby's, the strong Roots they're showing up is simple beautiful, thank a lot for the sponsorship of sweetseeds ,
Likes
40
Share
@Chubbs
Follow
420Fastbuds FBT2314 Germination Week Time has come yet to start another amazing Tester strain from 420Fastbuds FBT2314. Started germination on 2/7 by soaking the seeds in just water for 48hrs then planting it directly in the soil (Roots Organic 707) in a 3gal fabric pot. I spray the top soil with my gallon sprayer keeping it moist for the next week. After 48hrs in the soil we have sprouts that emerged that appear to be healthy and happy. All in all Happy Growing
Likes
92
Share
🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚