Likes
17
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
8
Share
@Rinna
Follow
Overal I’m very happy. The weight’s looking insane. Obviously imma update you after drying and curing. Can’t say to much at this point, apart from the fact that everything is looking very nice!
Likes
17
Share
On the last day of week 10 I brought it down to 18 hours lights. Then half way through week 11 I brought it to 16 hours. My plan was to reduce light until next week to 12/12 so I could try and induce resin development. One plant is done, as you can see from the trichomes. The other will finish this week. I wasn’t finished flushing and would prefer another week, but I also don’t want couch lock bud.
Processing
Likes
22
Share
@420_TRON
Follow
overall very satisfied with the results and can't wait for the drying and curing to finish so i can lit one up!! the growing process wasn't that hard until she stressed during one of the training sessions and i had to cut off 2 colas during the veg cycle. for my first harvest ever i'm pretty happy with this little beauty:) day 2 of drying: weight dropped by half. total is now 50g and there's some more to loose 🙈 started curing the buds after 4 days of drying- overall 20g of dried buds ------ first taste 👅 (2 weeks curing): man it was worth waiting for an acceptable curing time before digging in, i tried it twice before and i have to say that curing plays a huge role when it comes to flavors, scents and high (so basically all the aspects that matter). wasn't even close to what i'm experiencing right now. great high, the taste is great with yummy fruity aftertastes. also looks like the volume of the buds have decreased by about 30-40% but they got denser will wait some more to see how curing benefits this one! ------- update 11/19/20 i had the trimmed leaves freezes so i decided to make some coconut infused RSO
Likes
14
Share
@dekss
Follow
8 semana la mejor parece ser que la cortare en la 9vena como dice el fabricante la planta se ve tapada en escarcha❄️❄️❄️ hay otras 2 que ya entraron a floración(a una le di 0.04 de monster bloom) las lollipop van mejor pero no creo que las deje si corto las otras antes
Likes
5
Share
Day 80 ~ Plants are looking and smelling great. I have been keeping an eye on the trichomes for the first plant and she looks like she will be ready right after the harvest moon! So I am excited to harvest her on Friday. While plant 2 is still another week and a half to 2 weeks away!
Likes
1
Share
So where do I start they are both the same strain but just growing completely different. The first picture is super frost growing strong while the second still seem to be in the beginning of flower stage. We will just keep an eye on it from week to week
Processing
Likes
26
Share
@Hawkbo
Follow
Got these transplanted to the rain science 3 gal bags and moved to a 4x4 in the basement where it's a little better environment in terms of vpd. I had a full bag of roots organic soil so I decided to do a soil/coco blend like I did with the current autoflower crop. I also topped every single one of em mid week. Once I get the flower tent all cleaned out and everything I'll be throwing these in there for bloom. Hoping this will be an even better grow than the last since I have both my arms back. I'm doing the update a little early since I was late on it last week, today (tuesday 9.10.19) is day 43 from germination and about day 39 from full sprout. Before this week they were under only about 185w in a 4x4 area so it's been slow growth so far. These are doing solid, some are a little small and bushy like the purple candy paint and the rocstar breath but not that they have some room to grow maybe theyll pick it up.
Likes
15
Share
@38PLAN
Follow
Stiamo ancora raccogliendo,ancora nessuna pianta é morta,sto rimuovendo piano piano le cime più mature,così facendo evitiamo le cime popcorn e diamo il tempo alla pianta di riempire anche le cime inferiori,per adesso levando quella fumata e venduta siamo all'incirca sui 780g,però aspettiamo anche il nuovo stendino,alla fine del raccolto dovremmo arrivare a quasi 2 Kili con 7 piante e 6 vasi,con una media di 333g a pianta,ho pubblicato tutto quello che potevo,ogni procedimento,spero vi piaccia e mi seguiate
Processing
Likes
Comments
Share
Las tres primeras plantas del vídeo son gorilla glue 4 y las otras watermelon. Se observa en las watermelon un inicio de floración un poco raro, con malformaciones en las primeras preflores. Seguimos para ver evolución de esta planta!
Likes
7
Share
@RakonGrow
Follow
+ Day 43: 2.25L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 42: 0.625L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 41:2.25L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 39: 1.75L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.0ml/L Final PH 6.13 +
Likes
10
Share
@Yolka
Follow
Everything is going well! Already want to try this baby, there's already a lot of sugar. And when do you start tasting your popcorn at the bottom of the branches? :)
Likes
Comments
Share
Shes getting there . If I keep feeding her and shes a hungry beast I’ll tell ya that . The top dress amendments did NOTHING for her . Each few days shes asking for water and if I don’t add food into each water she starts to fade . Shes receiving currently 80ml of organic compost tea concentrate in 2 gals of water and devouring it . The signs of stress or issues I’ve noticed on occur on the areas that get constant light the areas around the edges are pristinely green and lush looking . I figure if I put her on ANY schedule less than 24 she would stop showing signs of deficiency. I was being safe and feeding her every other watering and giving her only 40ml of food in 2 gals but like I said I recently gave her back to back feedings and upped the food and she stood tall praying to the lights . I can admit she hasn’t looked as healthy as she did when she was planted fresh in the mixed soil . I think it’s because I let the soil dry out so much in between watering a letting the plant tell me when it needs water avoiding root rot that I’ve killed thr microbiology of the soil that would break down the too dress feeding for her . In the future I need to be more mindful of the base “soil” mixture I use and it’s moisture holding capability and moderate mu watering to keep a moist burn or soaked soil if I plan to continue in soil . I figure another 3 weeks of feeding on the heavier side and she’ll be ready for FLIP TO FLOWER !! I’m scared of burning her this close to the flip but as hungry as she’s showing me she is I also really wanna see her potential . I could save a lot of this guess work if I purchased and learned to use a TDS meter and note the pms shes getting and the affects of her growth but for now I’ll continue to few my way along unless someone and a TDS meter for dummies approach that can simplify the calibration and method use of the meter
Likes
7
Share
@BIYEI
Follow
Floracion (Tiempo estimado 64 dias) Primer Semana de Floracion 08/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 09/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, subir demaciado la intencidad del ventilador fue contraproducente ya que las hojas sufrieron quemaduras por frio, se a empezado a regular un poco mejor la temperatura pero el intractor y extractor de 4 pulgadas no estan eficiente, empeze a provar con hielo embotellado para bajar temperatura de la solucion nutriva, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 10/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 11/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 12/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 13/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, se cambia extractor por uno de 8 pulgadas con filtro, se mantiene la temperatura a 21 grados con la lampara a 75 % de potencia, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 14/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad.
Likes
1
Share
@Kern420
Follow
Woche über haben sich die Blüten weiter entwickelt. Die Trichome wurden mehr und man fängt an erste Terpene zu riechen. Wir haben Donnerstag (BT 2) stark entlaubt und schauen jetzt wie die Pflanzen wachsen. Tropi fängt an erste Farbakzente zu entwickeln in den Buds.
Processing
Likes
8
Share
@Max1973
Follow
Day 14 - Clay balls arrived, all looks good.... 😎 **the rust and damage on the first leaves is nothing to worry about, the ice cream container water level dropped below the root level, fixed it, but was cool to learn how fast hyrdo dmg can occur.... 👍 Day 17 - Lookin good... vid.... 👍😎👊
Processing
Likes
2
Share
Hola familia, siento la ausencia estos últimos 8 días, pero estoy de vuelta, estás misty gorilla auto de Zambezaseeds, están fenómeno, ya empiezan a desprender aromas, y eso es agradable, espero que engorden más estas flores por lo demás va bien, entonces la temperatura la mantenemos por debajo de 26 la humedad por debajo del 40% , sigo alimentando las con Agrobeta, por supuesto, os voy adelantando que va a ver muchos cambios cara al futuro y para bien, os iré diciendo poco a poco. Un saludo fumetillas y buenos humos.
Likes
36
Share
@Coopmc
Follow
Going to flush her tonight and hit her up with Sensizyme then give her a full feed probably Wensday
Likes
74
Share
Week 1 - 01/01 to 01/08 2021 HUGE THANKS TO @MARSHYDROLED and @VIPARSPECTRALED! New surge protectors/heavy duty timers/the good cords. The LSD-25 itself looks similar to my first run with a very slow growth compared to the other 3 strains i have going now. It is from the same tester kit so I am expecting a small plant overall but the new lights will definitely give me more overall bud. I have all my seedlings under the P1500 from Vipar as my veg light for the first few weeks to a month. It's SO nice to not have a blurple anymore, the light is way better in my room and on the eyes. The new diodes had every single seedling grow more in 6 hours than it did in the first 7 days under the blurp LED, EVEN the LSD-25. It had no hight to it before the Vipar went in. While the other 3 are doing better, the LSD is still going to be one of my favourites. I can't wait to smell that earthy/varnish/citrus. I noticed a bit of spotting on the Dark Devil in my other diary so I added some Hydrogen Peroxide to the spray bottle and it cleared up. All four have been getting constant spritzing from the spray bottle to keep humidity up. Have no doubt the new lights will make the plant/overall yield. Thanks for stopping in! Throw down a like and/or follow so i can return the favour 🙌 -- Check out my Diary of the Year 2020 entry 🙏 https://growdiaries.com/diaries/54258-fastbuds-original-auto-sour-diesel-grow-journal-by-glazedgrow IG: @GlazedGrow CannaBuzz: @GlazedGrow