Tag 35: Zeit zum entlauben und ich beginne mit LST. Tag 38: Die Pflanze hat meine Maßnahmen sichtbar gut überstanden und ist wieder wohlauf!

The Gorilla Punch is still the smallest girl in the tent, but she’s really starting to show her potential this week.💪 She might not be big in size, but her structure looks great, healthy leaves, and a deep, dark green color that makes her stand out from the others.💚 She also got a light defoliation this week, just removing a few leaves that were covering lower budsites.🍃 Environment remains stable: Temp: 25–26 °C RH: 55–60 % PPFD: around 900–1000 µmol/m²/s under the Spider Farmer SE5000 Watering is on the same rhythm as the others, about 4 L every 3 days, RO water with CalMag as usual.💧 She’s small but healthy, compact, and starting to form some nice early flowers. Really curious how she’ll turn out, I have a feeling she’ll surprise me later on 😎✨

420 Fastbuds Week 2 Veg FBT2302 The two of these are starting off great. The few rust spots stopped and stayed on the couple leafs it showed up on. I feed 500ml of solution every other day. I did start the General Hydroponics 3 part Flora series as well as the Calimagic. On week one I started 1/4tsp per gal ratio every other feed, so far no burn so will probably bump it up this coming week and see how they respond. All in all Happy Growing.

👉The daily routine of twice daily fertigation has given me a small insight as to what Phil Conners may have gone thru. There has been promising changes however that re-assure me that the plant is indeed maturing and will finish soon. The top leaves are starting to fade, and a couple of amber trichomes have been spotted! So far the amber color is light, almost yellow, and should darken up a bit by harvest time. At the rate they seem to be getting cloudy/milky I could be harvesting in as little as 3 days, but that is just wishful thinking I'm sure. I'm hoping no more than 10 more days. But I will let the plant decide...as long as there are only a few clears and the rest cloudy then I will harvest. 👉I took one small cola tip bud from an upper level, secondary branch. It weighed 30g with leaves, 10g trimmed and when dried to 20% should be 2g. I did this to be able to inspect the buds with a little more stability when using the USB scope. Those pix are the first 6 on this page. 👉Nutrient mix is the same recipe: week 11 on the General hydroponics flora series drain to waste chart. I reduced the concentration to 1ms from 1.3. The saturation level for the pot is averaging around 1lt per fertigation. I give it 2.5l at lights on, and 2L 1-2hrs before lights off. For some reason this grow session there is a persistent/prolific algea growth on the outside of the pot (cloth pot). I have the same fan setup Ive been using all year. It may be that when I didnt spray the pot off for a couple week the algea got a firm hold on the pot. I use a pressure sprayer with a H2O2 solution (1gallon water with 60ml h202) to spray off the exterior of the pot every couple days. THis keeps it at bay somewhat. After harvest I will cut open the cloth pot to see if the algea extends inside the pot any and if has affected the roots. 👉 While trichome hunting is very kewl if good pictures are taken, its very frustrating to get a decent pic due to any slight shake causes the pic to blur. When doing daily eye loop inspections I dont turn off the grow lights or fans. But when trying to get pix I turn off all the fans and both grow lights. This helps a little when trying to take pix with the USB scope.I have the small scope mounted on a tripod and that eliminate my own movement, but just trying to focus proves to be tedious because any touch causes the image to shake wildly, which results in very slow progress as I search around the plant and try for decent pix. Today I got a tube extension set for my 35mm DSLR. It turned my regular 55mm lens into a macro lens. While its not the same as a regular macro lense, its way cheaper....35$ for the tube set as opposed to 300$ for an actual macro lens. THe high resolution allows me to get sharp images with a deeper feild of focus than the scope. I still need lots of practice and need to work on lighting. I included some cropped and un-cropped macro shots done with the camera. The other macro shots are the USB scope. You can see its still got plenty of clear, lots of cloudy, and an amber here or there. The areas that I have touched have strands of resin that look almost like spider silk. SOOOOOO frosty! Santa is going to really enjoy his milk and cookies when he visits my house.

🌱 : 💧 : 💡 : Dli: 45 mol/m²/d 🤔 :

She's into flush mode now and good thing I got a new filter and fan!! She is a stinker!! Gas stink galore!! ⛽⛽⛽ Not sure how I can edit these weeks...won't let me put multiple week 11's?? @growdiaries @grow_diaries @GrowDiaries

Day 73, took another batch if clones three days after taking the 2nd batch so now I have 80 clones that will root in 11 to 14 days. The sun is hot again back to +30C° day temps, I was to lazy to take individual photos of my mother plants. I'll give the plants 10 days to recover from the stress from taking cuttings. Day 75, last day in the tent for my mother plants, tonight there going inside boxes for 3 day of darkness so that the plants forget the 18 hrs veg lighting to follow the sun. 2nd batch of clones to veg for a week before going outside to flower. Mothers in boxes they will come out on the 24th September

Cosecha: -632 gramos secos, mucho más de lo que esperaba. -buen sabor, olor potente, efecto muy cerebral. -me atrase en varios procesos, lo que alargó al menos en unas 2 semanas el cultivo, sin cometer los mismos errores creo que se puede lograr más cantidad y más rápido. -Advanced nutrients siempre me ha dado buen resultado, aunque los productos son caros, en el segundo cultivo estoy probando otro fertilizante más barato y hasta ahora con excelentes resultados. -seguiré usando el mismo sustrato(turba + vermiculita en proporción 50/50). -en el segundo cultivo(Jamaican Dream 2) es posible que la cosecha sea más grande y más rápida, ya que voy aprendiendo de los errores cometidos y voy refinando el método. Muchas gracias por los comentarios, saludos.

All details will be added every day/week if u have any questions feel free to ask. December 4th:starting in the winter, veg and bloom will happen under 400watt hps to keep the grow room warm. the seeds have been germinating for 2 days with the wet paper towel technique, they got root and are now in soil and the rockwool cube. for now im just waiting for the seeds to show root coming out of the rockwool, then i transplant to the netpot with clay pellets straight in the dwc, untill then they get fluorescent light (max 7 days) these are autoflowers so they get 18 or 20 hours light. nutrients General hydroponics three part :micro gro bloom and calmag water: rainwater (25ppm) i hope the room wont cool of too much when the lights go out. Day 1 (December 5) seeds start to come above the rockwool and the soil Day 2 (december 6) stems start to stretch i give them both pure rain water with 100ppm calmag when they feel dry. Day 4 (december 8) still no root visible out of the rockwool Day 5 (december 9) root visible outside of rockwool cube and transplant to the 55Liter rdwc air pumps 10l/minute Day 7 (december 11) root comes trough netpot, i lowered the water by removing 3Liters

Welcome to Flower Week 3 of Sensi Seeds Purple Berry Muffinz I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Purple Berry Muffinz: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 26% • ⏳ Flowering Time: 6-7weeks

Bestva Quantum Board / Samsung LM301B Mr Hide Seeds Semana de engorde e inicio de lavado de raíces para dos de ellas. De momento todo se ve en orden, buen olor y aspecto pesado. Buenos humos a todos !

This was a little sad week. Since I dont have a properly dehumidifier, the humidity raised and botrytis appeared... Added a directly wind (24h/7) on my plants and removed all bud with botrytis

Weeks 12/13 Green house feeding works really well .

Welcome to My Synthetic + Organic Auto Cinderella Jack Diary. Thanks to Dutch-Passion for supplying my with great seeds to enter this contest. Much appreciated. Into the last week of this grow. Both plants have eaten up and completely finished and nice and ripe. And another few days. I'll harvest these pretty ladies. Again, it seems my Synthetic nutrients, isn't working just yet. But I know I'll get there. Really happy with the organic. Huge cola and side cola, not the biggest of plants, but grown very quickly and the amount of frost is nothing to scoff at. I'm very happy with the results. These are some of my 1st autos I've not topped. They do make for a much nicer shape. But, I just can't say for sure, if topping, (done right) is a better thing to do for some autos.. I'm hoping the quality and thc will be there. As there was no stress, other than the Synthetic pigment mutation that wouldn't of caused much harm to her. The buds/colas are just a 1/5 of the size. But, they are far from larfy and airy. Some pretty nice dense sticky nugs to look forward to from the Synthetic and big ass colas from the organic, best of both worlds. I done some light defoliation to make sure everything ripens up in this last push. But, looking throughout everything is past the 30% amber trichs and everything is 95%+ cloudy. Am going to leave them for the next week. I'll add pics and add another week for my harvest, and after I've tested and tried I'll give a G/W, much appreciated. Thanks for tuning in.

Week 5 update 🌱🔥 — the tent is looking full and healthy! Main plant is wide and strong after topping + LST, really starting to show her structure. The second plant is still smaller but holding steady, pushing new growth and showing good recovery 💪. Feed mix this week: Corex + Eldex + Terra + CalMag + Bud Candy + Mira + Terpinator (~1400 ppm @ pH 6.0). Watering to 10–20% runoff each time keeps the coco clean and roots thriving. Temps holding steady around 27 °C with RH 60–70% 🌬️. Leaves are praying hard under the Spider Farmer G3000 with no signs of stress or burn. 💡 Grower Tip (for Thailand growers 🇹🇭): If an RO system isn’t convenient, you can use the local street purified water machines (1-1.5L = 1 Baht). Cheap and clean enough for coco grows without the heavy tap water ppm.

Very good looking bush but wrong cal mag...