Increased Buddy to 1mm p/l. Will be adding PK14 in the next 2 weeks as they're peak flower and will need the Potassium etc. These plants are at the front and to the right in the timelapses.

Purple shine a bien repris son développement, niveau racines il va être temps de la rempoter une bonne masse racinaire commence à sortir du air pot. Le 25/04 seconde taille des branches principales, de 2 apex cela va passer à quatre😉, apport de solution nutritive pour réduire le stress de la taille(terragrow 1,5ml, katanaroot 0,2ml, silicon 1ml, calmag 0,5ml). Maintenant repos pour cette demoiselle avant la prochaine taille😉 Purple shine semble reprendre assez vite sa végétation après une taille. Ses branches sont bien épaisse ajout de silice et a participé.

Very good autoflower strain,this strain is the safe option if you don’t know how to grow.

------GENERAL COMMENT------ As planed I lowered the base nutrient to 2ml, and took a break from Cal Mag, to release the N a bit, green is on point now. Tomorrow will catch up with the Cal Mag schedule as usual. Time for some overdrive, for the rest all good, girls are developing well and buds are getting bigger, no issues. Smelling delicious! Hope I had some Terpinator to give a go... ------SM.BB COMMENT------ BB is maturing faster you already can see I have cloudy Trichomes, she will be a fast finisher as it looks like...

2018.12.07 - Clone Day 68 - Flowering Day 16 I'm struggling with how to address the significant difference in height between #5 and the rest of them. I much prefer growing from seeds, where I know how to top, manifold, and LST to create an even canopy layer.

So this is day 40 of flowering,I had a slight PH issue with the Lionheart (Granddaddy Crack) plant which is the light green plant, back right. I was able to fix the PH issue by flushing with 6.0 Ph'd water. Other than that everything is looking beautiful. Lot's of trichome development and the buds are setting nicely.The Malawi plant at the back left (tall 100% sativa) is also starting to set beautifully. Malawi has a long flowering time (up to 70 days!) which means the colas will be huge hopefully.

Week 4 Veg Report - TrolMaster Chronicles 🌱 What a week it’s been in the garden! We finally transplanted the Papaya Zoap into its final Autopot, and let me tell you, this plant is something special. Though her roots weren’t quite where I wanted them to be yet, the move was needed to help her catch up with the rest of the crew. She’s already looking fantastic in her new home, and I have no doubt she’s about to explode with growth in the coming days. Sometimes, you just have to trust the process, and I’m feeling like this is one of those moments. It’s almost as if the room itself is taking on a life of its own. 🌿 In fact, I’m starting to believe that what we’re building here is something greater than ourselves—there’s this energy in the room, a feeling of everything coming together perfectly. I can’t wait to see how this journey unfolds! Dialing in the VPD with TrolMaster’s Tech Now, let’s talk VPD (Vapor Pressure Deficit) and how I’ve been keeping everything in check with the Tend-X and the incredible (DSH-2U) Humidity Station. VPD is crucial to plant health—it’s all about finding that perfect balance between humidity and temperature to optimize transpiration and nutrient uptake. The (DSH-2U) Humidity Station, connected directly to my humidifier, has been an absolute game-changer in this regard. With its real-time data and automation, it allows me to monitor and adjust the RH with pinpoint accuracy. Simple yet brilliant, the (DSH-2U) Humidity Station is keeping my room at the sweet spot I need. Whether I’m tweaking the settings from my phone while I’m out and about or just fine-tuning things while relaxing at home, this machine does it all. It’s like having an extra pair of hands in the grow room—and when you’re managing something as complex as VPD, that’s invaluable! And yes, the TM+ Pro App—let’s not forget how awesome it is. I’m adjusting my grow room from the couch, the car, or even the bathroom 😜. I’ve said it before, but this app is making growing easier than ever. Feeding the Girls: The Perfect Blend 🌱 We’ve upped the game by adding CaMg-Boost at 0.25 ml/L to the feeding schedule. Along with the 1 ml/L of the all-in-one liquid, this brings the TDS up to 320 ppm, with a pH of 5.99 and solution temperature of 24.8°C. In the soil, readings are around 415 ppm, with temperatures hovering around 25°C The plants are absolutely thriving, and I can already see the difference this new feed is making. I can’t help but have a bit of fun with this process—it feels like I’m spoiling them with the best of the best. And they’re rewarding me with beautiful growth and vibrant green color. You know how it is, with the right care and attention, these plants are truly becoming a masterpiece in the making. 🌱 Shoutouts 💚 Big shoutout to TrolMaster and ThinkGrow LED for the phenomenal gear that’s making this grow smoother than ever. Also, massive thanks to Aptus Holland for their top-notch nutrition, and of course, to the community here on GrowDiaries—you guys keep the energy alive! 🌱 Last but definitely not least, shoutout to all the seed banks supporting this journey. You’ve been a huge part of this process, and I couldn’t do it without you! Remember, for exclusive behind-the-scenes content and updates in real time, head over to my Instagram and YouTube channels @DogDoctorOfficial. We’ve got tons of epic content lined up, and you won’t want to miss it! P.S. Let’s talk about the new Model One LED Bars—these beauties are not only powerful but super efficient. I’ve been able to dim them down, save on electricity costs, and still maintain an incredible PAR and spectrum. It’s all about fine-tuning the balance of power and performance, and these lights make it easy to get the best results while being eco-friendly. Whether you’re running them full throttle or dialing it back, you’re still getting optimal growth conditions for your plants. That’s the kind of innovation that takes your grow to the next level. 💡 Growers Love to all 🌿💚

Day 43 12/08/24 Monday Feed today, it was warm again so they drank the whole 300ml each so I have topped up another 150ml to see run off to prevent salt build up. Thriving 😍✌️💚 Day 45 14/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Day 48 17/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Picture and video update ✌️ 💚

Last day of Veg. Tomorrow Start flowering

I made these fem seeds from bridal party x the queen from copycatgenetixx. Initial germination start sept 2nd, added 3% h202 about 1 tbsp in the 1/2 cup of water. 4/4 100% I do not need to hunt as all will be phenomenal

Here we are, last week of feeding! She has been showing the first ambers begining of the week so I don't want to wait too long before harvest. Week 11 will be flush week. I really love this pheno; how it looks, smells and I hope tastes! The buds have nicely grown in size this last two week and trimming should be quite easy on this one! 😘 I realize I did't take global pics this week so next week before harvest I'll make plenty of them. But, I made a video attempt trying to film in macro and I already feel sorry for those of you that will get sick watching it... 😨 With this level of zoom it is so difficult to have a smooth travelling and no shaking, especially when you have to manually live focus. I will improve my skills for the harvest video!

Week 13 in the garden, and it's been a week of contemplation and admiration. Despite my initial plan to flip the plants, I decided to give them another week in vegetation. It's like I'm sculpting a masterpiece, carefully grooming the plants into a perfect botanical sculpture. Working with my plants feels like art – it requires skill, love, dedication, and a sense of playing God. As I look at the tent, I can't help but feel a sense of pride and joy. These green beauties are turning out amazing, and I'm filled with overwhelming happiness whenever I get the chance to speak to people about them and show them off. But the time has come to take the next step in their journey. They're being flipped this week for sure, ready to embark on the next chapter of their growth. It's bittersweet, but I know it's all part of the magical process of growing these wonderful plants. Here's to Week 13 – a week of artistry, joy, and the promise of new beginnings. 🌿🎨

Fed and defoliated to start week 7. The plant looks good, with a bit of yellowing, but the buds are on point and look as expected at this stage.

_____Week 6 | Day 43 - 49 ______ Day 42 - 48 🌞 ------ Not much happened this week. I had little time for pictures and documentation. This week I just made sure that the new branches always get a lot of light and are not covered by other leafs. The plants have not grown much, because I constantly stress them and push them down. All new shoots that grow to size were topped, in the middle area of the plant, to keep everything nice and even Day 48 🌞 ------- each Plant 2 Liter...gluck, gluck, gluck.... ____________________________________________________________________________________________ Light - 18/6 h - 400 Watt 60% Dim. PPFD - 600 - 650 µmol Temp. avg. - 22,1° Hum. avg. - 72 % RLH

5th week of flower, the plant has stopped growing and focused on the buds. Both plants look nice, I’m hoping the 3 gallon plant gets fatter before the end though.

📆 Week 13, 4-10 January 2024 4 January - Turned light time back 2hrs to a schedule of 14/10, and lowered light power to 50%. This will facilitate ripening by mimicking an autumn environment. 7 January - Flushed system, filled with RO water and 10ml p/gal HG FloraKleen, PH 6.2. 10 January - Turned lights off. 📑 This was the final week of flowering. It will be followed now by 3 days in darkness, giving a total of 7 days in plain RO water. This provides the proper nutrient flush and a small cannibinoid/terpene boost just prior to harvest. Which will be 13 January. She will then be followed by a 7-14 day curing process, where she’ll hang for 5-7 days until the chlorophyll has dried in the leaves, then trimmed, weighed, put into mason quart jars and burped until a RH of 62% is reached/maintained. While in this state the flower will reach its peak potency/flavor in about 30-40 days, and can last for 6-12 months. An overall interesting grow. Especially if you like the color purple. She grew rather rapidly for about 6 weeks as expected from an autoflower, then slowed down and flowered simultaniously. Buds are on the smaller side but tight. There certainly was no problem in resin development as she is quite frosty, sticky and smelly. The trichomes have purple and clear stems with milky heads, about 5-10% amber and 10%(+) clear. All white pistils have turned orange or brown. Genetics are very stable with no signs of foxtailing or hermaphroditism. The only problem I’ve had was with nutrient sensitivity in flower phase - specifically week 8. It will depend on the end product quality as to whether I will grow this strain again or not. My final update will run a few days later than usual, but will include the Harvest and Smoq review information. I want everyone to know I appreciate all the support, likes, looks, follows, mentions and speedy answers to my questions! You are all phenomenal! Muchas gracias! Vielen dank! Спасибо! Merci beaucoup! Thank you! 🍽️ Nutrient change on 4 January 🐲 Feeding schedule updated 4 January 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC .8 at 60 degrees F 💡 Light power at 50% That is it for this week. Thanks for the look, read and stopping by.

trichome development is coming along however I am worried that they might not make it until harvest. I will be starting 2 photoperiods along side 1 other auto on my next grow with suitable nutrients for my medium.