A more difficult week. I've been battling the water consumption on two of the girls. I ordered and hooked up the Blumats auto watering system. I followed the instructions to a T but they don't work on those settings for this type of plant. They must be recommending for succulents cause the girls dried out right away with the settings. So I've been slowing dialing it in the get the proper amount to release. This girl is doing fine with the water. Prolly because she was stunted and doesn't need as much. Getting bigger Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

Let me start by saying, I'M SO GLAD I DIDN'T CHOP! THESE BABIES ARE GAINING SOME SERIOUS BULK! I can not wait to see them finish out, It's really testing my patience, but I notice more bulk every single day! It's about time to get the chop, they are maturing really quick and I love it. The smells are absolutely insane!!!

Week 8 – Day 59 (Flower Day 29) 🔄 Recap Still using diluted osmotic water, but the drain pH remains stubbornly low – stuck between 5.6 and 5.8 📉 After trying with Canna pH+, I’ve decided to switch back to BioBizz pH+, which worked reliably in my last grow to raise pH when using Advanced Nutrients. Apparently, the combination of Canna pH+ and AN doesn’t play well together 🤔 🌿 Plant Status – White Widow 📏 Height: 110 cm – she’s still growing steadily 💡 I had to dim the LED slightly – currently around 950–1000 PPFD ✅ She’s handling the light intensity very well, no signs of stress ⚗️ Feeding at 100% Advanced Nutrients Masterline 📌 Summary White Widow looks great overall. Even with the suboptimal drain pH, no visible issues so far. Still, I’ll try to bring the pH up slightly again – BioBizz pH+ is on the way.

Happy GrowingHarvested at 15 weeks and the royal runtz will be a staple in my tent from here on exactly what I like to smoke the taste the buzz is perfect high and I'm a Head 💯 since birth so. The plant was a bit hollow didn't produce much all my errors I'm pretty positive but damn It is good . I also ran a sherbet queen . It is the opposite of what I really like I don't care for that cookie lemon mild high on the other hand it produced double and is still good smoke just for my preferences lacking ice got it hanging in a dark closet ac blasting and small fan circulating air . Then I'll jar it and maybe if let it cure a week or two if I can . Maybe also sherb top was 100 gs fresh and Runtz top was 60 gs fresh cut also I think I really did damage more than good in the flush process

Esa familia, otra semana más ya van para un mes de floración y hasta ahora estoy muy orgulloso de estos clones lo bien enraizaros que estaban y lo vigorosos que han crecido. Ahora en la floración están tirando muy bien las flores , ahora añadiremos pk y algo de overdrive pa ir acostumbrandolas , el azúcar ( bud candy) seguirá aportándose un par de semanas más, y hasta aquí es todo la verdad no hice mucho más . Vamos que ahora vendrá lo mejor ver cómo van formándose y engordando, pronto volveré , buenos humos 💨💨💨

The main cola is broken T_T some new seeds popped out...

Growing nicely, in preparation for flipping amended in this week: - kelp meal - malted barley - gypsum - basalt - neem meal - silica & covered with small amount of homemade compost

Grown out this week and got them ready for the early flower growth. Trimmed heavy and wired all branches away from each other. LST in full effect. Hoping it’s not too much trauma for them.. they proved me wrong. Bounced back with vigor and bright excitement! Eager to see these buds start forming 👀

Bubble og I still have 4 of these guys going. A few of them are still dark green and pretty decent growers they have thiner leaves. I'm sure a few of these will be on the chopping block later down a few of them just have crappy start growth and they need the humidity at 75% or above 100% the time with the light lower than normal or they start to shrivel up. That's not all of them just a couple. Also I am only going to flower 8 plants out if the 12 seedling and I have 5 strains going so can't have half my plants bubble og (wish I had room to grow the full 12 plants at a time) It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.

This is my first grow, felt like now is the perfect time to start. 😅 Picture 1 - The plants will have a 24h schedule with both sun and LED light. The solution with the cloth in front of the window is only temporary, I need something thats easy to pull up as soon as the sun comes out. My light is about 16in/37cm away from the plants, please let me know if its too close or too far away from the seedlings. Up until this point I germinated both the seedlings using one of those 'Easy Start' Kits with Microorganisms, I then just transplanted both plants with the soil still attached to them in the final pots. I am using Bio Bizz Light Mix for the soil. In about 1 week I will start adding the fertilizers, I will go with about half of what it says on the nutrient schedule because these are autoflowers. Picture 2 - Day 1 - Seedling number 1 is looking healthy. (I think?) As you can see I put a hygrometer next to it so I can monitor the Humidity and Temperature levels. I currently have a humidifier running next to the plants and humidity levels seem to be good so far. I read online between 65-80% are good at this stage. Picture 3 - Day 1 - Seedling number 1 again. At this stage I only water around the plant and dont soak the whole pot, I read that soaking the whole pot while the plant is this tiny can overwhelme the plants. I also noticed that the leaves look kinda yellow-ish? Please let me know if thats normal. Picture 4 - Day 1 - Seedling number 2. I need help with this one I dont know why but he doesnt look good, from the beginning he was much slower than plant 1 and when he finally popped out he looked like he was dying, he is kind of gaining a little bit of color now again but I dont know if he will make it. If you know whats wrong with him please let me know. I hope he opens his two little leafs soon. I still have a third seed laying around so please let me know if it'd be smarter to just abandone number 2 and germinate a new seed. Thanks for reading this far and I'll update as frequent as possible. Day 1 Issues Update - After taking a look at seedling number 2 again and seeing that after all this time it still didnt show any progress, I noticed that one of the two first leaves is actually cut. I mustve damaged it while inspecting earlier because I, (stupid newbie move), touched it too much or whatever. Now germinating my last seed in hopes that all goes well. Since I dont have anymore 'Easy Start' kits im going to try a different germination method, I will put the seed in a cup of water with a piece of cardboard on top of it overnight (12-15h) and then plant it into the moist soil afterwards. 😄 Picture 5 - Day 2 - Seedling 1 is still doing fine. In the morning the temperatures went up a lot (29 Celsius), due to the sun shining a lot through the window, and the seedling was showing slight signs of heat stress (Leafs going up and small yellow-is tint), I then opened the window and the Temperatures quickly dropped back to normal (20-23 Celsius). Moisture levels seem lower than yesterday and Im not sure why (probably because of the heat and opening the window?), still at a solid 62% tho so Im not too bothered. Picture 6 - Day 2 - Since my last Seedling 2 died I germinated another one, I put it in a glass of water over night (~15h) and then planted it into the soil. Hopefully it'll pop out in the next few days... 💪 Picture 7 - Day 3 - Everything looking good with Seedling 1, I kinda felt like it was sort of streching too much instead of growing its leaves, so I put the light closer to it. I will water again tomorrow, the last time I watered was when I put it in the soil 3 Days ago. Picture 8 - Day 3 - The new Seedling 2 is still germinating and will hopefully pop out of the soil in the next few days. Picture 9 - Day 4 - Seedling 1 still going strong, leaves are praying but I read that that is a good sign. I watered both pots again today with just Ph-water, will add fertilizer in about 3 days for seedling 1. Seedling 2 is still germinating, will post a new picture as soon as it pops out of the soil. 😉 Picture 10 - Day 5 - Seedling 1 looks healthy, but is going kinda slow. Turns out I had the light far too high... 😐 Pulled it as much down as I could now and its already growing better! Main indicator for not enough light was the stretching and the thin leaves. I will probably have to invest into a bigger setup as soon as flowering hits. ✊ Picture 11 - Day 6 - Seedling 1 leaves are getting bigger and the next set is already on the way. Picture 12 - Day 6 - After 4 days germination, seedling 2.1 finally popped out the soil! 👏 Picture 13 - Day 7 - Seedling 1 leaves seem a bit curled up, probably because of the hot sun this morning, Im not too worried tho. Will water with nutrients the first time tomorrow. Picture 14 - Day 7 - Seedling 2.1 looking fine, soil was pretty dry so I watered it a bit with ph water.

Thick, smelly dense buds ... They are still drying, some off them allready wet trimmed, some of them still attached to the stem, hanging to dry slower ... So can't come up with any numbers. It's a very nice harvest though 🤠

small side project: Rebegging some branches to preserve this pheno for the future. Hopefully they will root soon.

En esta semana he visto que tengo trips y le he hecho 2 riegos foliar uno con insecticida y el otro con Jabón Potásico y Aceite de Neem

I had to hand water them this week to get the EC back in the right range

Hello everyone, 🇬🇷 ...the previous week had a lot of growth and training... Angie has her natural shape, Lucy's been topped and LSTed and Michelle was LSTed...they are growing fast despite the low wattage Leds that they are under as the weather outside is cloudy and will be for days...they don't get any nutes, they have everything they need in their home...this is going to be a long grow,as mother nature will decide when these girls will go to flower... ====================================== WEEK 6:"FIRST AND LAST AND ALWAYS" ☠️Day 36...💧it's sunny and the girls are enjoying it...I watered them today,I changed again the watering pattern...now I give them 1,5 L every 3 days,depending on how dry the substrate is...Today I toped Lucy again on the two new main colas... ☠️Day 38...sunny again and the girls love it...Angie has become a beast,tall and bushy,while the other two are growing side shoots after the LST...I am impressed by GH Feeding... ☠️Day 39...💧watering day...What bothers me is that I will not be on time for the contest...I am growing outdoors and the girls will start flowering on late summer...harvest time will be on October,wee too late for the contest...I have to find a way to force flower them earlier...the problem is I have no dark room for that...its a challenge and I have to find a solution... ☠️Day 40...the girls are stretching more...they need light... ☠️Day 41...the weather here is crazy...sunny in the morning,raining in the afternoon...the girls take about 5-6 hours of direct sunlight... 🌚I decided that from today I will be placing Michelle and Lucy in a dark closet to force them flower.I hope it will work...I will put them inside it at 20:00 and get them out to the sun at 09:00 the next morning...13 hours of darkness will be enough for them to start flowering...Let's see how this goes...It's the only free space I have to do this as I cannot use my tent.There is no light leak in the closet...Angie is too tall to get in there so she will be flowering when nature calls... ☠️Day 42...💧watering day...first day of 11/13 for Lucy and Michelle...the closet they are in is small so I am a bit worried for air circulation...in the morning they seemed fine however... This week is over,thank u all for watching...see u next week friends☠️

Dear Friends ❤️ in this week we topped again and bended this great Umme by Anesia Seeds ❤️❤️❤️❤️❤️❤️❤️❤️ I topped plants and remove big fan leaves that covered bud sites I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 ABOUT UMME, feminized seeds Our Umme is a unique personality, she is incredibly strong, full of life, shows an extraordinary interest in cannabis and delicious flavors and is probably one of the friendliest beings on our planet. Umme is a Vietnamese Pot-Bellied Pig lady and she inspired us to name our new THC-rich strain after her. Both she and our new cannabis strain are real heavyweights with an irrepressible energy. For UMME we have crossed a particularly aromatic Blackberry Moonrocks and a Brownie Scout selected for potency. We have thus created a unique genetic basis for an outstanding new and extremely potent strain that will certainly be found in numerous varieties over the next few years. And how could it be otherwise, Umme has become a real queen and a bud machine at the same time, producing excessive amounts of resin, buds and intense effects. The large, dense, resin-drowned flowers often get a beautiful purple color. The buds can reach a massive THC content of up to 30% and are therefore far too strong for many beginners. In addition to the extremely thick layer of white trichomes, it produces a fascinating aroma that is addictive. This is reminiscent of blueberry cake and has notes of cinnamon and vanilla. The high is overwhelmingly powerful. It gives you a feeling of deep joy, euphoria and pervasive relaxation like you’ve never experienced before. Mind and body are wrapped in a fluffy cloud and it becomes impossible to get up from the couch. The cerebral effects expand the senses and create an impressive feeling of bliss. Stress and worry are shot into another galaxy as space and time reach a new dimension. The effect and the diverse terpene profile make Umme an unforgettable experience. Those who make clear concentrates or distillates will love the strain because it naturally produces such a highly concentrated amount of THC. Growing UMME The indica dominant strain has a flowering time of 8-9 weeks and produces high yields of 500-550 g / m² with no problems under good conditions. Outdoors, the strain reaches a height of 200-250 cm while indoors it grows to around 115-130 cm. The plants from the seeds develop quickly and are amazingly vigorous and hardy. No grow is really complete without the hassle that it upsets everything that has existed. Medical Use The strong physical calming effect helps to relieve pain, stress and muscle tension. It ensures a deep sleep and helps to calm down after a stressful day. DATA SHEET: Brownie Scout x Blackberry Moonrocks®️ • Genetics: mostly Indica • Yield: 550g/m² • up to 700g per plant • flowering time: 8-9 weeks • THC: up to 30% • Aroma: blueberries, sweet 💸💸💸💸💸Buy UMME: https://anesiaseeds.com/product/umme/ 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾