Processing
Likes
Comments
Share
She is growing really good and healthy. The trichomes are so much I can;t imagine how much it will be later in stage. I stopped giving Algo grow and reduced the Nitrogen. As you can see its going fine and all good. She takes allot of water though. I had to water her on days she normaly doesn't get watered. But so far so fine so good.😎🙏
Likes
3
Share
@Ninjabuds
Follow
The northern lights 10 seedling has a smell of skunk it’s pretty nice I hope it stacks nicely like a skunk plant it’s one of the biggest and bushiest plants in the tent and seems to like to branch out This past week was smooth sailing and I topped all the plants
Processing
Likes
6
Share
@Treemos
Follow
Hi guys, sorry if I posted this week so late, but I was sooo busy! This week, I began to give two first doses of Flawless Finish, to start clean the soil (and unlock Indra from its nutrient burn). Aurora is growing really great, has a powerful smell and a white color when I get photo of her at night 😍 Indra began to grow again, after the use of Flawless Finish, the flowers are getting bigger and the smell is growing day by day, I will post her trichomes the next week! Enjoy the photos guys, and thank you all for the help :)
Likes
1
Share
@nonick123
Follow
🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmsltd - https://www.instagram.com/stacksfarmsltd 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
3
Share
bit of light stress in the last weeks photos, everything has cleared up still watering with silica when pot is dry. might just do a plain watering we have started flowering at day 18 on one of the crinkles , the rest of the room has now followed
Likes
18
Share
@Papablob
Follow
et voila. celle ci démarre super bien. Elle à l'air forte, résistante, prête a tout . Une Rambeu quoi..😜 09/05 jusqu'à la tout va bien. 12/05 la tige ma parut un petit peu fine, la lampe doit être un peut trop haute, mais ca a l'air d'aller. Une tige haute sera peut-être plus facile a gérer en Lst. J'améliore mon système petit a petit. Il y a beaucoup à faire encore .
Likes
7
Share
@Just_Weed
Follow
I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.
Processing
Likes
34
Share
@Damonkey
Follow
So, starting the 6th week of flower with the phantom OG. BIg Bud has been stopped and has passed over the baton to Bloombastic for the last two weeks(ish) before flush. The POG. Are looking nice hopefully the next 3 or 4 weeks will get them looking a bit better than that.😍😍😍 The smell is awesome very fresh and clean, one leaning towards a minty aroma.
Likes
Comments
Share
@Calo
Follow
We're in the second week of flowering, and the stretching period has begun. This cut in flowering phase is growing very quickly and can triple in height in about three weeks with the right nutrients. For now, my strategy continues as in the first week: I'll only give them water enriched with microorganisms and let them grow without any stress.
Likes
17
Share
@Mroizo
Follow
Beginning of the third week. I started to do lst, maybe it was too soon, but it seemed to me that there were some bud sites that needed more light. I'm not very experienced, but this isn't my first grow, so far they look good to me. I don't use nutrients, at least for now.
Processing
Likes
20
Share
She's looking so beautiful,very nice strain to grow for sure,I'm trying to give her a good shape before flowering starts. I add organic liquids nuts only once a week and looks like she loves it,let's keep up the work!! 💚💛❤️🌱🤩
Likes
19
Share
@nonick123
Follow
Día 27 (20/05) Riego con 250 ml de Té de Compost Día 28 (21/05) Vuelven a tener sed! Las riego con 250 ml sólo H20 pH 6.2 Día 29 (22/05) Riego con 750 ml H2O+ Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 30 (23/05) Banana Purple Punch Auto está sedienta de nuevo! 500 ml de sólo H2O con el pH 6.3 Día 31 (24/05) Banana Purple Punch Auto está sedienta de nuevo! Riego con 750 ml H2O + Regulator 0,15 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 32 (25/05) Las plantas no paran de crecer! 😍 Día 33 (26/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Banana Purple Punch Auto está creciendo unas ramas laterales impresionantes 😍😍😍 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
4
Share
I'm going to probably have to check with the tape measure for next week shes still stretching! Its definetly the most massive auto and I am looking forward to doing the same strain with low stress straining fully indoors. Some trichomes and definetly a very strong diesel undertone for aroma. Last night the low was 59 degrees in the greenhouse I believe one of the warmest nights we have had this summer. 4 days ago it was 34 outside for a low and I assume around 40 or 45 in the greenhouse. I have been feeding heavy with warm worm casting tea that I brew up 5 gallons at a time and i use 3 cups of castings. Check back next week to see how big this bud gets! And remember it's always 4:20 somewhere
Likes
61
Share
End of week 7 ! No more nutrients now only ph water ! 10 days and i will cut them ! They looking so helthy and smells so good ! The buds have very good size and i hope big harvest !!!!
Likes
5
Share
@Ozgrow
Follow
just about finished up this week. Choc mint 1 is about ready for chop. Chopped couple of main colas as i seen couple of signs of budrot. Dropped lights down to 400w each as temps are starting to rise above 30c. Choc mint 2 is looking unreal. Heaps of huge colas,think i will pull the most of this one. Will probably give till day 65.
Likes
21
Share
Heyókȟa I desire to study nature, and to know better the mind of God, the creator, Holy art thou, O Father. 12x12=144, A dodecahedron is a polyhedron with 12 faces, and in coordination chemistry, it refers to a geometry where ligands surround a central metal atom (in this case, Magnesium) in a specific, 8-coordinate arrangement. Dodecahedrane is a hydrocarbon, meaning it's composed solely of carbon and hydrogen atoms. The carbon atoms are arranged at the corners of a dodecahedron, a 3D shape with 12 pentagonal faces. The water molecules in the dodecahedron form hydrogen bonds that are individually slightly weaker than in either the dimer or the tetramer. However, because three-quarters of the O -H groups in the dodecahedron form hydrogen bonds, it has a more negative energy per molecule than has either the dimer or the tetramer. Magnesium (Mg2+) is the essential, central metal ion in the chlorophyll molecule, crucial for photosynthesis by enabling light absorption and energy transfer. It is chelated by four nitrogen atoms within the porphyrin (or chlorin) ring structure. Chlorophyll appears green because it reflects light in the green region of the visible spectrum, specifically between 490 and 570 nm. The main resonance electronic frequency of a neutral Magnesium (Mg) atom corresponds to the transition from the ground state to the first excited state. Resonance Line Wavelength of Mg2+: 285.1nm (UVB light). The central atom of the chlorophyll molecule is Magnesium (Mg2+), which is coordinated within a porphyrin ring. The electronic "resonance frequency" of this central atom—meaning the frequency at which its electrons absorb energy—is primarily driven by the electronic transitions (ETR) of the surrounding conjugated chlorin ring structure, rather than a discrete atomic transition of the Magnesium atom itself. The resonant electronic frequencies of the chlorophyll porphyrin (technically, a chlorin) ring are determined by the energy required to promote π-electrons within its conjugated system, primarily appearing in the blue and red regions of the visible spectrum. In standard physics, Chloryphyll b has peak absorption at 460nm (Blue). If we take the peak wavelength 460nm and a UV-B, UVR8 peak absorption wavelength 285nm Tryptophan-285 (W285) Sensing protein. 460/285=1.618 Φ, "natural harmony" and the "structure of light". The cryptochrome photoreceptor (CRY) is a UV-A/blue light receptor that shares this dual sensitivity with several other biological structures and functions, including significant sequence similarity and a common evolutionary ancestor with DNA photolyase enzymes. These are light-activated enzymes that use blue/UV-A light to repair DNA damage caused by UV-B radiation in plants. Dodecahedrane (C20H20) is a hydrocarbon with a cage-like structure where carbon atoms form 12 pentagonal faces (a regular dodecahedron). It is highly symmetric (icosahedral), contains no delocalized electrons (no aromaticity), and has minimal angle strain, but significant torsional strain. Water Dodecahedron (H2O) forms hydrogen-bonded cages. While individual hydrogen bonds in this structure are weaker than in the linear dimer or tetramer, it has a more negative total energy per molecule. This is because three-quarters (75%) of the groups are involved in hydrogen bonding, creating a very stable, closed-shell configuration. a 3D carbon hydrocarbon (C20H20) to stable water clusters in hydrate, while the Magnesium ion acts as the central activator within a conjugated ring in biological systems, with its electronic absorption dominated by the ring, not the atom itself. Effective quantum efficiency of photosystem II, often denoted as ΦPSII In horticultural lighting, adding 730 nm (far-red) LEDs alongside standard red/blue lights has been shown to increase canopy photosynthesis by 20–30% in several crops by acting synergistically with shorter wavelengths. However, the limitation is that excessive, pure IR/Far-red light (without accompanying red light) can trigger the "shade avoidance response," causing plants to grow tall, weak, and spindly rather than robust. Knowing is half the battle however, engineering or utilizing infrared light (specifically the 700-750 nm far-red range) is a viable method to boost photosynthetic efficiency. It acts as a bridge to allow PSII to utilize a broader spectrum of light, breaking the traditional 700 nm barrier. Extend, then multiply. UVR8-mediated signaling (often in conjunction with CRY proteins) triggers protective mechanisms that maintain the stability of the photosynthetic apparatus (including LHCII and reaction center proteins), thus ensuring that the efficiency of Photosystem II remains higher in UV-B-exposed plants compared to plants lacking this receptor. ΦPSII indictates the rate of electron transfer from water to plastoquinone, which drives the production of ATP and NADPH. There is a close link between ΦPSII and the true rate of CO2 fixation (Φ*co2), particularly in C4 plants. Effective quantum efficiency of photosystem II, often denoted as ΦPSII, represents the proportion of light absorbed by Photosystem II (ΦPSII) that is actually used in photosynthetic electron transport. It is a key indicator of how efficiently a plant is using light for photosynthesis, as opposed to losing it as heat or fluorescence. ΦPSII (effective quantum yield of photosystem II) functions primarily as a "multiplier" (a coefficient of efficiency) rather than an additive factor when estimating the overall photosynthetic electron transport rate (ETR). Multipliers are considered far more beneficial than additions because they generate exponential growth, leverage existing resources to their full potential, and create sustainable, self-multiplying capacity, rather than just incremental, linear increases. Humans, and most other mammals, rely on other mechanisms, such as nucleotide excision repair, to manage and repair UV-induced DNA damage. As such, humans do not have the direct, light-driven repair mechanism that photolyase offers in plants.
Likes
92
Share
@Krisis
Follow
04/02/24. Here we are starting week 6. Not too much has changed since last week. 2 of the girls leaves seem to be changing colors no matter what intensity of light I try, or what nutrients I give, or don’t. Both of their pistols have gotten really dark as well. #1 (middle plant) has stayed pretty dark green, pretty sure she has too much nitrogen before. Her pistols seem to be darkening much slower. It seems as the other 2 are very similar to each other, and seem more mature. I figured they would maybe drink less water as time went on but instead it seems they are drinking more than ever. Some days the soil is so dry and they look droopy after having been watered thoroughly the day before. Others they seem alright, so watering schedule is typically every other day unless they demand more. I’ve been giving them about a gallon- watering in very slowly. I also gave them some tea, which I’ve listed up top. Trying to help their leaves. Maybe this is just normal, but I don’t know, just think it’s too early for colors. The smell I mentioned in another week has gotten louder. I swear I smell spices mixed in there now too. It’s been nice out the past few days so I opened the windows. Oops. Could smell them outside. Smelled like weird spicy food cooking with a side of chemical, gas, and a skunk spraying? Yeah idk lol.
Likes
7
Share
@Zuppler
Follow
Week 9 - Fourth Week of Flower The Donutz gang is hitting its stride as the fourth week of flower unfolds. Trichomes are developing beautifully, and the plants are entering full production mode. A few challenges cropped up this week, but quick thinking and some DIY ingenuity kept everything on track. Key Updates: Trichome Progress: The resin glands are popping off, with a frosty layer forming across the developing buds. The plants are starting to show their true potential, and the tent is starting to smell. New Fan Installation: The old ventilator tapped out this week, so a replacement was installed to maintain proper airflow. This ensures the plants stay cool and prevents any issues with humidity or stagnant air. Lamp Adjustment: The front-left plant shot up too close to the light, so I had to get creative. I built a DIY solution to raise the lamp higher, ensuring even coverage and preventing light stress. Accident Recovery: During the light adjustment, I initially tried securing the front-left plant with a rubber band. Concerned it might melt, I removed it, but in the process, the main stem got damaged. Thankfully, the plant is a fighter. The main cola is now growing sideways but remains fully healthy and strong. This unexpected twist has added some character to the tent, and the plant is bouncing back beautifully. Observations: Despite the challenges, all plants are thriving, with strong growth and healthy bud development. The sideways-growing cola on the front-left plant is a unique highlight, showing the resilience of the Donutz genetics. Next Steps: Keep monitoring airflow and light height to avoid any further issues. Continue with the nutrient schedule and reverse osmosis (RO) watering to maintain stability. Watch the trichomes closely as they continue to mature, signaling the start of the final phases of flower. The Florida Gang grind is real, and the Donutz are proving their worth week after week. This tent is shaping up to be a legendary grow!
Likes
22
Share
Overall, i love this strain! Easy to grow, easy to smoke! I consider this an overall success! 141 grams dried is fine for me ✅
Likes
57
Share
Seedsman Auto Lemon is growing strong and stretching for the stars. She was defoliated this week, but bushed back out again. Fed her some Espoma Organic Grow this week.