day 15 (december 19) start of week 3 roots everywhere plant starts to take of now, the hydro is slightly bigger then the soil plant day 17: the hydro plant made a new set of leaves in just 2 days! day 19: i cut off the lowest leaves of both plants. i do this because on any autoflower these leaves produce a stem that wastes a lot of energy on small nugs. day 20: hydro plant got topped (3nodes) day 21: soil plant got topped (3nodes) same strategy with the topping, i do this early (i could pinch them off with my fingers) to reduce the time to recover. the plants bounce back like they didnt feel it and with the lowest leaf and small tiny stems cut off, these plants will produce 6 main stems with nice big and dense buds instead of a huge christmass tree with more leaves than bud.

Mar 31 I think things are going very well, one plant has rusty spots, pretty sure its calcium deficiency, will be upping across the board. Got the runoff ppm to a good spot, will be going back to 800ppm feeds by week 8, 750ppm this week. I want more stable genetics next time, I am way to new to be dealing with basically 3 different strains, that's what it feels like, and I have very little time as it is. Thinking of upping PPFD some more, i think the droop of the one plant was just adapting to watering till runoff, I want to see some fattening AND RIGHT NOW.

She recovered nicely from the harsh burning of the heater

Had too much nitrogen last week, so I lowered the amount of FloraMicro. What's your thought on my first grow? Trying to learn as much as possible!

День 81 Шишки формируются активнее, макушки набирают массу. Постепенно тримлю и курю нижние крупные листья и мелкие ветки — они всё равно не успеют созреть вместе с основными колами. Режим питания держу стабильным. Куст GHS, который переносил с гидропоники и пережил корневую гниль, сейчас красиво цветёт. Несмотря на все стрессы и более слабую генетику, он обогнал своего крепкого брата по скорости цветения. Жаль только, что размер соцветий и веток меньше. Зато основания у всех кустов сформировались мощные — LST сработал отлично. Верхние кусты каждый день вылезают из под сетки на 5-10 см. Заламываю, кручу макушки - на день хватает, востанавливаются и дальше газуют в вверх дизели. Прогноз по срокам Судя по другим репортам, от семени до харвеста уходит около 15 недель. Получается, ещё 3-4 недели на цветении. Проблемы с оборудованием Влажность иногда растет до 80-90%. Один светильник начал коротить и мигать — видна искра в месте соединения дросселя с платой. Капля эпоксидки с завода решила бы этот конструктивный дефект. Надеюсь дотянуть на этом борде до конца цикла, но в целом пора задуматься о более серьёзном освещении. В другом боксе китайский LED на 120 Вт начал светить в половину мощности, PPFD 100-150 выдает у макушки. Грядет пора обновлений, куда деть старый LED свет?

22 days blooming

Hi Guys the triple is doing well and i think next week orthe next after i will change the light schedule and start the flowering what you think??is that a good choice?? sorry for the bad quality of the pics thx everybody Daniele & Claudia Italians from Greece

croissance exponentiel

This was an interesting harvest. Everything was going great and the buds/trichomes were still piling on, when suddenly almost overnight plant "C" shifted to about 20% amber trichomes. So I harvested it, and because the other plant wasn't ready yet I decided to try water curing the first one for 7 days. Then at the end of the 7 days, I figured I'd hack down plant "D" and dry them both on the racks in the tent at the same time before moving into jars. The water curing was a huge success! After the first day, the water was cloudy with a slight green tinge. Second day was about the same. Then the water was just a little cloudy each change, no green tinge. Compare it to the diary I just opened around water re-curing some cannabis I bought from the government store, where the water is diarrhea brown :O On day 7 of my water cure, the water was perfectly clear so I decided to hack down plant "D" and get them both drying on racks in the tent together. While water-curing plant "C", I had its trim sitting in a bowl in the freezer. When I hacked down plant "D", I put its trim in the same bowl. After my typical wet-trimming, I hung up Plant "C"'s water-cured buds on the top rack, plant "D"'s buds on the 2nd rack for an old fashioned cure, and random trim from both plants spread out on the bottom 2 racks. The water-cured buds dried within about 24 hours and went into a jar with a 58% humidipack. The buds are SUPER dense and potent! Nice clean high, doesn't kill my throat. The downside is that the taste is really weak and not that great. But everything has pros and cons. Almost no trichome loss in the bucket during the water curing as well -- I was really worried about that! The other buds dried in about 36 hours and went into a jar with a 58% humidipack, where I burped it many times a day for a week. The smell and flavour are much more potent than the water-cured bud and it's a little harsher on my throat, but otherwise I'm not sure there's a detectable difference. However, you can SEE there's a sharp visual difference between the water-cured buds and the jar-cured :) Of course the jar-cured will mature more with time as well. Once the trim was completely dry, I put it in a bag in the deep freezer and dropped it to about -20. I didn't need to use a grinder this way -- I could just mash it all up in the bag with extreme ease! Sifted it through the kief screen, and pressed down 17 grams of lazy-man's hash! After processing the trim through the kief screen, I decarbed in the oven at 200F for 1 hour (this converts THC-A into THC or something to that effect -- if you don't do this, the edibles won't get you very high). I put the trim into a big mason jar and back into the freezer along with my bottle of Everclear. Once they dropped somewhere down around -20, I poured in the Everclear, put the lid on, and shook as hard as I could, as often as I could, for 5 minutes or so. I noticed that as I shook it around, the contents inside would alternate between solid and liquid which was kinda cool :) Shake it one way and it freezes, shake it the other way and it thaws... or something to that effect, anyway. I was able to use a double-coffee-filter to extract about 2 cups of dragon tincture! I threw everything in the coffee filter out -- next time I'm going to do a better job of it as there's a little pile of trichomes that forms at the bottom of the filter which I could put to use. Once I get that down next harvest, I'll have around 99% efficiency milking every last drop out of my harvests! White chocolate is so yummy, as are candy canes... I wanted to combine the two to make some edibles. Looking around for candy cane crush, I decided to check out Amazon. They had the same candy cane crush I was looking at from popular stores, for only a couple dollars more, so I figured sure why not have it delivered. I was planning to get some white Baker's chocolate, but on checkout of the candy cane crush I got a deal for adding on white chocolate Lindt bars for $1.25 a piece LOL! So I bought 10 of those. When the Amazon package arrived, I slowly boiled down 1/2 cup of my dragon tincture in a pot, then used a double-boiler setup to melt down 4 of the Lindt bars in the same pot. Once it was mixed well with the hash oil, I set it aside to cool for about 3 minutes before stirring in 1/8 cup of candy cane crush (plus I ended up adding maybe like a tablespoon more), pouring into a pan lined with parchment paper, and putting in the freezer for 30 minutes. So now I have a nice big chunk of white chocolate candy cane crunch stuff where a piece the size of my thumb gets me super high for like 8+ hours; 17 grams of lazy-man's hash; and 88 grams of bud :) And still enough dragon tincture left over to make 3 more rounds of edibles -- not sure what I'll make next! From now on I'm going to water cure a large portion of all my buds -- not just the ones I grow myself, but ones I buy from the Gummint too!

Getting ready to take clones and flip them into flower in the next few weeks

A sad week, I found bud rot and had to take my plants out and do a big check and remove all dense underdeveloped growth. It will be a pretty big hit on the yield I guess but the most important thing is learning and that I did. The bud rot could spread due to my RH being 65/70 at nights and it used to be +80 before, + bad airflow. I got new fans in the tent and my dehumidifier was ordered already but its not in yet. On the other side, the plants are looking pretty damn good, they smell amazing and 3 of the 4 plants is getting a very dense nug structure.

Les pompoms commencent a se former belle structure de cette plante. Boit énormément. Les engrais se mettre en marche et cela fait une énorme différence.

Última semana de mis plantitas Hoy corto 12 de 16 Fue un cultivo sin problemas. Y creo que viene buena producción Recomiendo 100% los fertilizantes hesi buenísimos. 5 cultivos con ellos y 0 problemas. El sustrato Biobizz light mix excelente Las semillas de barneys farm uff pura crema. Eva seeds recomendables y las sweed seeds buenisimas semillas para seguir cultivando. Los Led yxo para ser de un perfil bajo qué no a toda la gente les gusta cumplen la. Función 480w de pura potencia en un espacio de 120x120 los recomiendo para gente que tenga un presupuesto bajo. Ahora voy por unos sobre 600w aunque los reforzaría estos con unos led de 100w . Bueno feliz con los resultados. Esta semana mostraré los resultados de las plantas cortadas. Se vienen más cultivos Salu2

Hallo zusammen 🤙 Sie wächst sehr schön und macht keine Probleme

July 5 - other crops on the lateral branches, growing strong every day 💚🔥

I finally turned 600 watts on, would love to get comments from you folks, so clueless here. If you see something wrong, please let me know.

What a journey! These girls were so awesome to watch grow. I made some real true newbie mistakes right from the start... 😳 Packed the soil way too tight, did not germinate in wet paper towel first, and of course over-watered. The one I call yellow monster actually had its root above ground and it turned brown. I did fix it up laughing all the time. But in the end with only a dry weight of 21.7 g , watching it turn yellow then purple was well worth it. 😍 The one I wanted to main-line was the very first to sprout but the very last to grow... the end up being the tallest at 38 inches. She stayed green the whole time. She had a weight of 34.2 g 😜 My LST was fantastic... I could only imagine what she would have turned out like with no to little mistakes. She was a cool mixture of green and purple. Her weight was 43.6 g 😳😍😜 Total weight = 99.5 grams or 3.55 oz Kryptonite soil "living soil", just added water the whole time... (with a little bit of molasses mixed in once in a while). 315w CMH Lights with an extra 600w LED for 3 or 4 week near the end... thanks to a friend! Had temp average around 24-25 Celsius with night temps between 16-19 Celsius. Used 5 Gallon Smart pots. Only vaped a little... waiting for full cure. 3-4 weeks! Will update! Thank you @Sweet_Seeds! Thanks for watching! 😵 Update June 17th: Smell has changed from curing. Alot more pungent. I tried a taste from each but I'm going to wait another week before my final comment. Final Update June 26th... The curing process is pretty much done, I believe. The taste has changed a little... has more of earthy taste to it now. Since I cured at 3 different times, each pheno has it's own nice little buzzzz😵 It has been a blast!!! 😛