Hyped. Germination on 08.09.2023 Broke soil on 12.09.2023 SF-1000 on 40%

This girl is done. Getting the chop tonite. Been so much damn fun. Bathroom photo shoot turned out great. Very happy with this girl. Gonna be sad to chop her down.

End of week 4, great week. Nice healthy plants really filled the pots out. Have to stop LST due to no more space. Lights and genetics working great.

Approaching the finish line. Fertilizer is now at its final dose. Both plants stopped growing now and started to build thick buds. Ken in fact is way ahead in terms of buds but it might be because he Hase a little bit less in number. It’s possible that I trained Ryu too much for his pot size 😆😆. But let’s see. Both looking very good and a lot more powerful than in my first grow. Water intake is still massive. The top soil is rock solid while draining water super fast which must mean the pots are filled with massive roots. The erected teeth came down a bit but they were never that severe in the first place so I’m still not worried about that. I skipped one day of watering to account for possible slight overfeeding but I mean, today’s watering then was with the increased dose of fert 😆😆. I know I’m pushing it a little bit but that’s deliberate. I have high demands both in mass and quality so my approach is riding the edge as good as possible from the beginning 😆

What a week, the Amnesia Haze from Divine Seeds continues to pack on flower and is honestly worth the wait for weight if you know what i mean 😉 she is currently going through her flush period and will luckily make it for atleast a week of drying and two weeks of curing before competition time, wish she had more time but unfortunately the glory of holding one of the first East Coast Canna Cup Trophies is the goal at hand and we get the feeling that she is without a doubt a cup winner. 29th April is D Day, wish us luck till then everyone

second week of flowering done. They were stretching like crazy. Installed a 3rd net to keep the stretch under control. Jumped from 35 cm to 83 cm in 2 weeks. They giving me some headache because of the hight. Should have send them 1 or 2 weeks earlier into flower. But it’s a lesson how to handle or not handle hybrids and sativas. Over all in was quite relaxing just adding water/ nutrients and doing some defoliation. So far so good. it’s quite easy to keep them on the same level with 3 nets. Still learning how to handle certain situations and conditions. But so far I am happy. They have got a massive need of Kalium at the moment. Should have given them more TA -Grow nutrients. But that’s party of learning. Really happy about the aeroponic setup. Really like the full control of the grow medium. (Compared to soil it’s easier for control freaks). Really water efficient compared to dwc/hydro/soil and changes made take effect pretty fast. Really nice oxygen supply at the roots and overall nice control possibilities regarding to roots and medium/solution. A possible downside could be that u can only use mineral nutrients and no organic nutrients. (We want some bacteria and fungus but not these ones that break down organic nutrients. That is more a preference thing than anything else. Good made hydro can compete with soil easily but most ppl put to much in there and ruin it any way. (Don’t want to trigger its good that everyone got its own style and evolves it in his needs and conditions.) The maintenance effort that is required for aero is a bit higher than soil and dwc but it pays off. (Personal opinion but numbers proof it) Looking forward to the next weeks and flower build up. Really excited about. Conditions of the Grow: 💡 PPFD: 900 umol/m2/s ☀️ DLI: 38.8 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 50-55 % 🌡️ 🌞Daytime Temp.: 22-24 *C 🌡️ 🌙Nighttime Temp.: 19-20 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 19-20 *C Water TDS: 1100ppm | EC: 2200us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container

Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 56 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green here I'am again, yesterdy morning my ladies had their last schwazzing that means day 20-21 in flower, all in all everything looks very good, from yesterda on my CO² system is also in operation, tomorrow my ladies only have a bit of ph reg. water from me and giving them some time to revover from the defoliation stress before i start with nutes again.... and now I leave them alone until further notice.... Cheerio & Tataaa🤜🤛👊🏻🇱🇺🌱 ⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 5.90 Tds/ec 1.5 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 00ml by 1L. HyPro : Cal-Mag  0.5 ml by 1L. Light distance: =55cm to plant = 30cm to CTgrow sensor dimmer on 80% = 980umol/m²PPDF +-10 Vpd/kpa  - 1.350 -1.400 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 30% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems

Week 9

Day 22: Hey everyone! Update on the second grow: the plants are looking very healthy and seem to be growing much faster than the first batch. 🌿 I feel like we've already done a lot better with these plants compared to the first grow. What do you all think? Any thoughts or suggestions? Day 26 (Second Grow): Hey everyone! Exciting news: the plants in our second grow have names now too! 🌿 This will make it easier to identify and keep track of each one, especially if they get moved around. It should also help you all follow along more easily with the pictures we post. We've built a SCROG (Screen of Green) net for the plants in both grows. For those who don’t know, a SCROG net helps to train the plants to grow horizontally, which maximizes light exposure to all parts of the plant and promotes more even growth. We're using it to ensure all plants get plenty of light and develop a uniform canopy. Additionally, we've placed a hygrometer among the plants to measure the humidity between the leaves. We've noticed that the humidity sometimes exceeds 70% in those areas. We're considering whether we need more fans, an intake ventilation system, or if a dehumidifier would be a better option. We're leaning towards adding more fans to improve air circulation, but we'd love to hear your thoughts and suggestions! Stay tuned for more updates as we continue to watch both grows progress!

ช่วงนี้จะแดดไม่ค่อยมีเลยครับ ฝนปรอยทั้งวัน อากาศครึ้ม

I welcome you from Russia my friends from different parts of the world. The end of 16 weeks has come. Plants already fully show their ripeness, and buds SAG from their weight. Soon I will be harvesting, as soon as I get the final dry product I will make the last update of this diary.

End of week 4 and all is great! This girl is beefin up to be a monster! Already got a ton of bud on her an their is still 4-6 weeks to go. loving this Hortilux Eye 1000w bulb. Really bringing the A game. Not so bumbed about spending $ 125 on a bulb now...lol haven’t had to really take any foliage off yet with the exception of the growth under the netting I removed at 1 weeks into flowering. I say “hell no” too popcorn fluff! Lol gotta save that energy for the top buds. Going great so far anyway, I made a DIY light bar for my light rail mover out of an old metal bed frame so that was cool. Saved $50 per tent... I ain’t no sucker gonna pay $50 for an aluminum bar with some bolts. Lol gonna hook up my “water coolers soon too since the summer is approaching and my water temps are begging to creep up again. Lol you may have noticed a computer case sitting in the corner of my grow tents in past videos, they are DIY water chillers made from some thermoelectric coolers and a copper cooling coil. Stay tuned to see them operational soon! I will be posting a DIY video on how to build one yourself out of an old desktop computer and a few other parts off Amazon. Cheers 💨

I will answer how it smoked in a couple days maybe week