Likes
Comments
Share
@NoLimitQ
Follow
16.03.22 25 день цветения. Опрыскиваю талой водой из пульвика. Стадия позднее цветение. 17.03.22 26 день цветения. Опрыскиваю талой водой из пульвика 18.03.22 27 день цветения. Опрыскиваю талой водой из пульвика, завтра полив без удобрений, талой водой со стабильным pH. 19.03.22 28 день цветения. Опрыскиваю талой водой из пульвика 20.03.22 29 день цветения. Полив талой водой, 3 литра, pH=6,5 ppm=10 Опрыскиваю талой водой из пульвика. 21.03.22 30 день цветения. - 22.03.22 31 день цветения. Завершена 9я неделя от всходов. Шишки бухнут, сегодня опробовал нижнюю веточку на водном. Уже берет неплохо=) Растем, цветем и развиваемся=)
Processing
Likes
7
Share
Финишная прямая началась. Несколько дней полив водой, далее 3-5 раз полив Рипеном, и еще раз вода. Запах просто бомба.
Likes
24
Share
@Daweed83
Follow
Girls look super healthy ! can’t wait for them to grow bigger buds but overall they looking great to me ! 🙏
Likes
31
Share
Likes
8
Share
Girls are looking beautiful. had a couple dots of PM show up again. I created a foliar spray using Garlic. I crushed fresh garlic into 4 cups of water and let sit for 12 hours. I strained that mixture and added in 12 cups of water making a gallon of solution. The science behind this is that Sulphur gets extracted from the Garlic and when applied in mist to the leaves it reduces leaf surface PH therefore eliminating the spread of PM. I also increased the soil PH slightly to hopefully inhibit more nutrient uptake and remain strong ! I dont ever want to use any whack chemicals, milk, peroxide... all that seems like you may aswell throw the plant out. We are doing our best to keep up quality of bud as this is my medicine. Her pistils are beautiful white and leaves look healthy. trichome production is wild. Buds are starting to swell ! another 2-3 weeks and ill be cutting bottled nutes and stickin to dry amendments to finish them. Its a 7-9 week Flowering strain according to my source of clones. Northern Lights x Hash Passion. Ill have to keep an eye with my trichome scope and go from there i am currently Following Indo nutrients recommended doses and giving phosphorus + Calcium boost couple days after adding microbes and carbs to soil, i added 4 tbsp of Goguano Bloom and a couple handfulls of Black earth at the end of last week as top bedding. Second scrog arrives today :D very happy to get em spread further and have the comfort of fat buds suspended in the air by second scrog with even coverage 8)
Likes
5
Share
Doing well planning a light defoliation this week.
Likes
4
Share
@SpliffDoc
Follow
Start of week 3 flower (Day 15) and things seem to be going OK. Slight calcium deficiency, I think I may have overshot the bloom too soon and it's locking out the calcium, I'll cut back slightly and see how she goes. I'm excited to see how this turns out. Hopefully just keep things running smoothly for the next 6 weeks. Ill try and update as much as possible. ✌️
Likes
1
Share
🌱 Black Diamond Auto – Plant B | Week 4 | 12/12 From Seed Another Diamond Begins to Show Its Shape 💎 Welcome back to another update from my 8×8 Adventure, where every plant gets the opportunity to tell its own story. This is Black Diamond Auto – Plant B, the sister of Plant A. While they share the same genetics, the same environment, the same feeding schedule and the same light, it’s already fascinating to watch how differently they choose to grow. Plant B has developed into a much more compact structure. She isn’t chasing height like her sister—instead she’s building a dense, symmetrical framework with tight internodal spacing and a very healthy canopy. Sometimes the smallest plants surprise us the most once flowering really begins. Both plants are being grown under my favorite challenge: 12/12 from seed. For those joining the diary for the first time, this means the plants have been under a 12 hours on / 12 hours off light schedule from the day they germinated. Instead of spending weeks in vegetative growth under 18 or 20 hours of light, they naturally transition into flowering much sooner, creating unique plant structures while allowing more harvests throughout the year. Every run teaches something new, and this comparison between two sisters should be another interesting chapter. ⸻ 🌱 Environment This week the room remained very stable despite the summer temperatures. • Day temperature: 33°C • Night temperature: 25°C • Relative humidity: 63% • pH: 6.1 • EC: 1.35 mS/cm • CO₂: 639 ppm The plants continue growing inside 15 L pots, receiving approximately 1.1 L of nutrient solution per day. ⸻ 💧 Hand-Watering vs AutoPot Unlike her sister, Plant B is still being hand-watered. Both plants receive exactly the same nutrient recipe, but the irrigation method is different. This should make for an interesting comparison later in the grow. Hand-watering gives me complete control over when and how much solution she receives, allowing the substrate to go through gentle wet and dry cycles before each irrigation. Her sister, meanwhile, is growing inside an AutoPot system. The AutoPot uses an AquaValve, a clever mechanical valve that automatically opens and closes depending on the water level inside the tray. As the plant drinks, the valve refills the tray without pumps, electricity or timers, allowing the roots to take exactly what they need whenever they need it. Will continuous bottom feeding produce faster growth than traditional hand-watering? That’s one of the questions this grow hopes to answer. ⸻ 🌿 Training No topping. No supercropping. No heavy stress. This week has been all about Low Stress Training (LST). Branches continue being gently bent outward to improve light penetration across the canopy while maintaining an even structure. Every day I spend a few minutes adjusting stems, leaf tucking large fan leaves and opening small windows of light for the developing side branches. It’s amazing how much a few careful adjustments can change the architecture of a plant without causing any significant stress. The goal is simple: * create an even canopy * expose future flowering sites * maximize airflow * let every branch earn its place under the LEDs Plant B has responded beautifully, staying compact while becoming wider with every passing day. ⸻ 🌸 The First Signs of Flower By the end of Week 4 the first pistils are finally appearing. This is always one of my favorite moments in a 12/12 from seed project. The transition happens naturally, almost quietly, until one morning those first white hairs appear and you know the next chapter has officially begun. Stretch is only beginning, but her structure suggests she’ll remain shorter and bushier than Plant A. Two sisters. Same genetics. Same room. Same nutrients. Yet completely different personalities. That’s exactly why I love documenting every individual plant. ⸻ 🍽️ Feeding This week’s recipe remained simple and consistent: • Terra Grow — 1.8 ml/L • Power Roots — 1 ml/L • Pure Zym — 1 ml/L • Sugar Royal — 1 ml/L EC remained at 1.35, with pH adjusted to 6.1 before every watering. She continues responding with vigorous growth, healthy color and strong new shoots throughout the canopy. ⸻ 📸 Final Thoughts Watching siblings develop side by side is one of the most rewarding parts of growing. Plant A seems determined to become the taller, more vigorous sister. Plant B is taking a different path—shorter, denser and incredibly well balanced. Neither is better. They’re simply expressing different sides of the same genetics, and that’s exactly what makes these side-by-side diaries so enjoyable. The stretch has only just begun, flowering is officially underway, and I’m excited to see whether hand-watering can keep pace with the AutoPot system over the coming weeks. Only time—and plenty of photos—will tell. ⸻ 🙏 Thank You As always, thank you to everyone following this adventure from around the world. To GrowDiaries for providing a platform where growers can learn from one another. To Plagron for the nutrients that continue feeding this project. To the incredible breeders behind Black Diamond Auto. To the teams behind the LEDs, the equipment and every tool helping make this grow possible. And finally, thank you to every person who stops by these diaries. Whether you’ve been here since day one, discovered the journey this week, leave comments, ask questions, share advice, quietly read along, or even challenge my methods—you all contribute to making this project better. Every interaction is another opportunity to learn, improve and keep growing together. Growers Love and see you all next week. Happy growing. 🌱💚
Likes
11
Share
@Lazuli
Follow
Lets see how much weight we can get of this one
Likes
19
Share
@DerFesi
Follow
Trichome werden schon langsam milchig und das Zimmer reicht wie ein Coofeshop in Amsterdam nach dem öffnen des Zeltes 🤭. Beide haben auch einen leicht anderen Geruch, da bin ich schon sehr auf das Endergebnis gespannt. 23.1 : spitzen werden braun, dass werde ich die Tage mal etwas beobachten. Sonntag der 25.1 würde laut Schema das letzte Mal düngen anstehen
Likes
58
Share
Welcome to week 6 with four tall ladies of Critical Orange Punch. They grew a bit and I removed some of the lower branches that did not get enough light and were too small and thin. The plants look healthy and seem to like their 1.5 EC nutrients mix. Day 37: I only measured ph and EC which were both ok (5.8 & 1.6) Day 38: I added 20l water to the tank and added some nutrients including Calcium and Mag. I hope to prevent them from getting these rust spots with the CalMag. EC is set to 1.7, ph 5.5 Day 39: Ph down to 5.7 (before it was 6.0), EC is at 1.8. Gonna get the EC down a bit when the tank is getting empty. And I removed some smaller branches again because I don't wanna get exclusive popcorn buds. And I measured the height again which is 50cm in average. I hope they stop growing soon and start producing flowers because the space above is getting smaller and smaller. And I cleaned the bio-pump completely. Day 40: I cut down some smaller branches to get more airflow between the leafes and because I don't want popcorn buds. And I stopped giving them water. The plan is to keep it stopped for 2-3 days to dry them out. I am wondering when the flowers will appear. Day 41: nothing Day 42: Some more stretching, the highest branch is 74cm in average they have approx 64cm. Added some Bloombastic to the tank and put the watering system on again. The pots were really light and empty but the plants looked pretty smooth. Also I added Gen200 again.
Likes
23
Share
@sebino
Follow
HI guys, she made it wonderfully so far entering the tenth week. She is terminating flowering stage and I already begun watering her with just water. Today I flushed the pot two times. Cheers
Likes
7
Share
They’re all doing amazing. Caramelino smells like a super sweet, floral fruit. The White Widow in the corner is stacking up with white flowers all the way up the main stems.
Likes
11
Share
@Radagast_
Follow
17.08. Wedding Cake 1# Day 114# The plant was at the end of its 16th week 2 days ago, it has not yet started flowering Wedding Cake 2# Day 108# She was at the end of her 15th week 3 days ago and is very close to blooming The pictures and video are from yesterday. Stay High and Keep Growing!!!
Likes
8
Share
@Kirsten
Follow
14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 17.1.25: I'm quite disappointed that I didn't use a 5 or even better my 10 Gallon pot for PPP2 and even PPP1. Especially the PPP2, which is the Triploid pheno. I'd love to have given her the best conditions to see the full potential! 😕 Obviously, I didn't know when I popped the beans, but it just feels like a wasted opportunity to learn, and that's hard to swallow for me. That's my whole aim with these plants. Despite my regrets in that respect, the plants are both looking great! PPP3 is literally just taking up prime real estate 😑 I can't bring myself to trash a plant, though. Plus, it's interesting in and of itself. Just being as it has stayed so small and only has 3 fingers in any of its leaves in week 10. Continuing to adjust ties and pegs as often as I can, trying not to overdo it. 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️
Likes
4
Share
It’s been a busy week with defoliation,,exposing the flowers to as much light as possible,,,couple of close together branches,,so taking the leaves off,,exposé’s the tight spots,,keeping up her food to maximum strength,,and keeping her hydrated is key for now,,,she is starting to let off some awesome aroma,,👍👍👍👍🙏💚💚
Likes
5
Share
@Lazuli
Follow
Likes
61
Share
@WhiteEdge
Follow
30.04.2024 Continue into week 9 Clean nutrient tank for the last time...This is last week of flowering for almost all girls. Electrical Conductivity (EC): 0.8 for this week.. Purple Lemonade: First pheno is insane! Shape, size ,color, bud hardness, appearance, frostiness' all attributes to become photo model! Beautiful and high odor in the room! Lighting Parameters: PAR Map: Maximum PPFD is 800, minimum PPFD is 550. VPD: Ranges from -0.1-1.1 Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 19-20°C. Leaf Temperature: 21-22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 60%, positioned at a 45-55 cm distance. Girls drink less water, so for this week and till the end of flowering new misting timing's Daytime: ON for 50 seconds, followed by 30 minutes OFF. Nighttime: OFF for 50 seconds, followed by 45 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.80 and 6.00. Stable PH, small drifting up and downs EC: 0.87 Temperature: 19-21°C
Likes
15
Share
@Theia
Follow
A really explosive week of growth. I pushed PPFD up to 310umols. Dimmers are at 60% which is drawing 224w plus 18w of DRRB. I have alos started Emerson effect ... Another The Emerson effect is triggered by the simultaneous exposure of plants to light in the deep red and far-red spectra Deep Red 660 nm /Far-Red 700 nm . A bit of boring science that explains why you need both far red and deep red in order to trigger Emerson. The effect occurs because photosynthesis is driven by two distinct pigment systems working in series:Photosystem II (PSII): Absorbs energy most efficiently at shorter wavelengths (higher frequencies), like 680 nm (441 THz). Photosystem I (PSI): Absorbs energy most efficiently at longer wavelengths (lower frequencies), specifically 700 nm (428 THz). When you provide only the higher frequency (deep red), PSI becomes a bottleneck. When you provide only the lower frequency (far-red), PSII is not sufficiently excited to provide electrons. Providing both frequencies simultaneously allows both systems to work at peak efficiency, resulting in a rate of photosynthesis that is greater than the sum of the two lights used individually. To understand the Emerson Effect, think of photosynthesis not as a single engine, but as a two-stage assembly line. What is the Emerson Effect? Discovered by Robert Emerson in 1957, this phenomenon shows that plants perform photosynthesis much more efficiently when they are hit by two specific types of light at the same time: Deep Red (660 nm) and Far-Red (700+ nm). If you give a plant only Far-Red light, photosynthesis is very slow. If you give it only Deep Red, it's better but still limited. However, when you give it both at once, the total rate of photosynthesis is significantly higher than if you just added the two results together (1+1=3). What is Happening? (The "Assembly Line") Inside the plant's chloroplasts, there are two "workstations" called Photosystem II (PSII) and Photosystem I (PSI). They work in series, meaning the first one must pass "parts" to the second one. PSII (The First Station): This station is tuned to catch Deep Red light (660 nm). It harvests electrons from water. PSI (The Second Station): This station is tuned to catch Far-Red light (700 nm). It takes the electrons from the first station and uses them to create energy (ATP and NADPH). The Problem: If you only provide Deep Red light, the first station works fast, but the second station can't keep up because it isn't being "powered" efficiently by that specific frequency. This creates a traffic jam of electrons. The Solution: By adding Far-Red light, you power up the second station. It now "pulls" the electrons from the first station much faster, clearing the traffic jam and making the whole assembly line run at full speed. The Benefits for The Grow.. Because i am using the Biotabs water-only method, my plants already have a steady supply of organic nutrients. Implementing the Emerson Effect offers several distinct advantages: Increased Biomass: Because the "engine" is running faster, the plant produces more sugars and carbohydrates, leading to heavier fruits or flowers. Faster Finishing: Plants often reach maturity sooner because they have more surplus energy to complete their life cycle. Better Light Penetration: Far-Red light is very good at passing through the upper leaves. This "wakes up" the lower parts of the plant that would otherwise be shaded, allowing the whole plant to contribute to growth. Enhanced Secondary Metabolites: In many crops, this synergistic light can stimulate the production of terpenes and antioxidants, improving the "quality" (smell, taste, and potency) of the final harvest. The "Sunrise/Sunset" Trick I am using 4x Invisible sun Far red/Deep red bars,they use high-quality Samsung LH351H (660nm Deep Red) and specific Far-Red (730nm) diodes for 10–15 minutes at the start or end of the light cycle. This mimics the natural shift in light at sunrise and sunset, "waking up" the photosystems or signaling the plant to go into "sleep mode" faster, which can further optimize the flowering cycle. Enviromentally i am chasing a VPD of about 1,1kpa. My room seem to sit nicely at lights on at 24c with no real drama and a little help from a 220W greenhouse bar radiator. Its using abot 4kw/h a day atm because my room is attached to the side of my house and its been -5c.. I have had to add some humidity as its also very dry atm. Im aiming for RH of 65% with my 24c but it is more around the 62s.. VPD is crucial and is the focus for this grow for me. The autopots and Biotabs make it so easy ican really just focus on perfect enviroment. A VPD of 1.0–1.2 kPa provides enough "atmospheric pull" to move calcium and magnesium up from the roots, which is critical for the rapid cell division happening now.. Plants will be flipped on Saturday which is their week 5 as im a bit behind.. As this happens i will push PPFD upto 4-500umols. by week 2 of flower. Thats the plan anyway..
Processing
Likes
22
Share
@dutdut
Follow
Very happy with the end result all three plants look pretty big. Hard to believe this little 325watt light powered these beasts! Plants are fading and looking nice.... about another week until harvest!