Still going strong

4/15/25 Things are progressing nicely. Some plants dont seem to be doing too much but 3 of them or so that are really standing out. Im curious if some of these are going to be longer flowering time than anticipated with the very obvious sativa dominant plants.

Good seeing the difference in each done some LST with them all but the middle 2 in the 25L I’ve did both of them different to see the outcome Fiming with one topping on the other and some defoliation on one and not the other Newbie goals practice make perfect 😂✌️🏻

the week went well, the cola is developing perfectly, you need to remove the large fan sheets for uniform exposure to light and air

Treated for pests again will repeat every three days until last week of flush. Nice pink colour on one but hard to get a good picture. Will take them out next week and take some better quality photos! Some thirsty girls budding up nicely hopefully get a good harvest!

.

Day 22 - 660 ml water (ph 6.5)(22 cm) Day 23 - 660 ml water with Acti+Heaven+Grow+Calmag (ph 6.6)(24 cm) Day 24 - no water(26 cm) Day 25 - 660 ml water (ph 6.6)(28 cm) Day 26 - 660 ml water with Acti+Heaven+Grow, also trimmed a bit of fan leafs, it's getting crowded inside (ph 6.5)(30 cm) Day 27 - 660 ml water (ph 6.6)(33 cm) Day 28 - 1L water (ph 6.5)(35 cm)

Bubble fucking gum terps are real?!

Frostbanger Plants 1-6 Week 9 May 18– 24 FLOWER 5 Nutrients : 3 gal GH Micro 20 ml GH Gro 10 ml GH Bloom 30ml CalMag 15 ml Recharge 10ml Green sensation 15ml Power buds 7.5 ml 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2ltr each 5/23 PH 6.6, PPM 1570, temp 68.5 2ltr each 5/24 pics & vid Since all 6 gals are getting frosty, I did some trichome pics. The statistics on Frostbanger indicate 50-day flower. Pics show mostly clear and milky. There are a few with amber trichs and many orange pistils indicating maturation. At least 3 more weeks for maturity on these gals. I continue manual control of the environment and using 3 circulating fans and the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” P.S I added a no churn ice cream recipe in week 4 of Natronas recipes. It is easy 3 ingredients. I bought Mango puree instead of fresh and reduced that to reduce water content. Try it. 😋 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

The 3 smaller autos are at day 20, the Strawberry cheesecake 30 days or so, I think the topping really stunted it but we'll see how the buds develop. The other three had there first top dress with powderfeed biogrow. I am not going to bother topping the others.

Fue una experiencia nueva utilizando este ciclo de cultivo 12/12hrs, encuentro que es una excelente producción para el ciclo utilizado. Psicodelicia es una planta que recomiendo, buen aspecto, de un excelente desarrollo. Además de una excelente producción. Las flores cosechadas están perfectas para realizar extracciones, contienen mucha resina pegajosa y olorosa.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Un dia mas en buenas condiciones. Se sale como un bolido de Formula 1 Se esta andando bien despues de defoliacion. La dejo con las pocas hojas para mejor entrada de lal luz al los flores de abajo

Eccoci qui... Per problemi di lavoro ho tardato un pò la pubblicazione delle foto, la piccola è molto vigorosa ed emana un forte odore.. Già si può vedere la resina che si inizia a formare sulle cime in alto... La più alta del box anche se, credo non faccia cime giganti, sono molto contento che ha questo colore viola intenso nelle foglie, spero in un fenotipo più violaceo... Grazie a tutti per il supporto, NON VEDO L'ORA DI RACCOGLIERLA 🔥🌲❤️

Super easy growing, almost no maintenance, she just needs love and attention, and she will shine for you

The mimosa cake is the queen of the tent , she’s near a meter tall and smells fantastic. Keeping up the defol is a mission as is the feed , she’s a thirsty gurl getting thru 5L a day soon I’ll have to feed her daily to keep up with her . Thankfully the green crack stayed pretty small or I’d be struggling to fit her in the tent . Next week the same as this week keeping up the defol and hopefully keeping her happy

🌱 Weekly Report: Week 16 Flower – Gorilla Melon Highlights 🌱 Room Dynamics and Challenges This week marked a pivotal phase as we approached harvest. The decision to harvest Gorilla Melon in two stages allowed us to navigate a potential mold issue effectively. The mold was confined to select areas of dense colas, which were promptly removed to protect the rest of the plant. This experience reinforces the importance of keen observation, especially in the final weeks. Environmental Parameters • Temperature: 26°C • RH: 53.2% • VPD: 1.57 kPa • CO₂ Levels: 1067 ppm • PPFD: 690 µmol/m²/s • Solution Stats: pH 6.67 | TDS 695 ppm | Temp 18.3°C The ThinkGrow LEDs and TrolMaster systems shone during this critical period, maintaining precise control over the environment. The addition of deep red and UV light at 100%, with whites at 50%, seemed to amplify trichome production, resulting in a frosty finish across the garden. Highlights of the Week • Fading Colors: The garden displayed a stunning spectrum of fading hues, signaling the end of the cycle. Gorilla Melon’s red highlights and frost stood out beautifully. • Defoliation Success: The earlier defoliation efforts paid off, minimizing mold spread and allowing light to penetrate deep into the canopy. • Trichome Inspection: The frost level across Gorilla Melon was nothing short of mesmerizing, a testament to her genetics and the controlled environment. Gratitude and Community A heartfelt thank you to the community for your support and engagement. The sponsors—ThinkGrow LED, TrolMaster, Aptus Holland, and ProMix Soil—made this run possible. It’s been a pleasure to share this journey with you all. What’s Next? With Gorilla Melon harvested, the spotlight now shifts to the other girls in the garden. Stay tuned for their individual harvest reports, smoke reviews, and more as we wrap up this epic series! Discount Codes so you can save big on your next check out 💚💚💚 CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Hello Diary, The first week of vegetation is over. I am very happy with how the plants are progressing. I'm sorry that not all three sprouted, for the first time I will have two plants on the "Farm". I started shoot a video every week so that everyone who is interested in this strain will be able to better follow the development and progress. The conditions at the "Farm" are good, although I would like the temperature to be a little higher, the humidity in the air is around 65% thanks to the humidifier. Until now, I always had the lights on 24 hours during the vegetation phase, and then when they start to flower, I would change it to 18/6. This time I put 20/4 from the first day of vegetation and I plan to do so until the end of flowering. I took pictures on the first and last day of the first week, just to see the difference in a week. Here's a quick recap of the week. 25/01/2023. - Day 1. Officially the first day of vegetation. When the plant sprouts, I wait for it to get at least 4 real leaves until the actual vegetation begins. After taking the photos, I watered the plants with clean water, I only lowered the pH. to 6.0 considering that tap water is around 7.5 pH. I gave each plant about 1 liter of water. Temp./Humi. - 22.1 degrees/65% Medusa F1 #1 - 4 cm Medusa F1 #2 - 3.5 cm 31/01/2023. - Day 7. End of the first week of vegetation. I also watered the plants after taking the photos. Considering the increased humidity inside the grow-box, I noticed that they don't ask for too much water. Temp./Humi. - 22.5 degrees/68% Medusa F1 #1 - 8.5 cm Medusa F1 #2 - 7 cm That's all for this week. See you next week.

wet trim, nice buds, will update when more details are available --- got 0.3g of crazy scissors hash - vaped a tiny bit of it and the high is amazing 🤩 ---- 11/6/20 started curing & made some RSO of the trimming (~3ml) ---- 11/7/20 made a 2nd batch of RSO (~10ml)