Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
44
Share
Feb 14, 2018: Seems my fears were unfounded, I'm not seeing any spots of mildew and I think in 4 days I would see something if it was there. Water with plain water, just ph'd nothing else added. staked up a couple of the buds, all the other palnts are managing to hold each other up, the fan leaves seem to grow into each other so the canopy is a solid moving mass. When the oscillating fan hits the colas the whole canopy sways slightly. For future grow I plan to have more space between plants, and will need a screen/net to hold everything up. Feb 12,13 2018: Watered with 10ml/Gal Tiger Bloom, 10ml/Gal Big Bloom, 2tsp blackstrap molasses, 1ml Cal-Mag per gallon. Ph'd to 6.5 ish. Lost my SD card so didn't get any photos 2/12, but took some with my phone on day 73, and then found my SD card. High quality photos are back tomorrow mourning. Feb 11, 2018: Had a bit of a freak out, thought i had spotted a couple PM spots forming, think it was just the leaves resinous sticky. After the scare decided to do some major cleanup of old leaves and ALL dead leaves, i know it wont help fight PM, but added a small 6" fan circulating air below canopy. Humidity has been constant due to running a dehumidifier so it stays between 45-50 lights on and off.
Likes
34
Share
@rhodes68
Follow
11/22 Week 14 One has fallen five remain FFT-11-1 is in dry Rate of harvest as much weather driven as anything dont want a lot exposed at once. Planning every 2-3 days FFT-10 is in full bud building mode still so keeping the pedal down on them with a 10/10 finishing feed till we see some closure on those buds. FFT-9 is really showing great color purple so deep almost black water only FFT-11-2 is waiting her turn water only 11/23 pics Harvest FFT-11-2 in the morning 11/24 Yield on FFt-11-1 : 189 grams dry FFt-11-2 in dry (1100 grams wet) 11/25 Unless the weather turns on us will harvest both FFt-9s tomorrow FFt-11-2 still in dry be finished tomorrow 11/27 The FFT-10 stands alone , showing signs of ending, putting them on a finishing feed and reduce as the buds close 11/28 Welp those signs of ending backed off and she making buds heavy again. Go girls go not reducing feed till this goes as far as it will zero pressure to harvest. Lights on pics Built a better jute cage for FFT-10-2 she is very wide and there was a danger of branches breaking from weight of buds. Increased Bloom and Peak PK hitting them a bit harder as dont want noticeable def beginning until I want them as much as practical. Buds still spikey and hairs strong though seem a few less its not much. Seems every time we switch up our PK for them it triggers another round of production. See what what when they begin to slow again. This is fun dont get to do this... ever... no space pressure finally although thats due to problems in germ more than my design going forward I think. Plants are at max par being under their individual ts-2000s so I killed the side lights not doing a lot anyway with the tent near empty 11/30 At lights on the buds seem to be slowing, reducing the Bloom nuets and PK after a single hard hit to see if they pick up
Likes
70
Share
Likes
10
Share
@Soronata
Follow
On flush regime, water only, no nutrients, only a soil cleaning solution. Still has some clear trichomes, a few milky and no browns. Guess it has to flower 1 or 2 weeks more. Full history of the setup on week 1.
Likes
8
Share
@Dendegrow
Follow
🎨 Monster Marker – Week 3 🌱 Last week, I accidentally snapped the main stem during low-stress training 😅✂️. Luckily, she’s healed up perfectly 💪🌿, and now the side branches are just as tall as the main one – looks really cool! 😎 The smell is absolutely insane 🤯🔥, and I can’t wait to see what she will produce! 🌸✨ --- 🎨 Monster Marker – Woche 3 🌱 Letzte Woche habe ich beim Low-Stress-Training leider den Hauptstamm abgebrochen 😅✂️. Zum Glück hat sich die Pflanze perfekt erholt 💪🌿, und jetzt sind die Seitentriebe genauso hoch wie der Haupttrieb – sieht richtig cool aus! 😎 Der Geruch ist absolut pervers 🤯🔥, und ich bin mega gespannt, was am Ende dabei rauskommt! 🌸✨
Likes
13
Share
Wow ich bin erstaunt wie riesig die Blätter. Sie hat auch stark angefangen Seiten Triebe zu bilden
Likes
4
Share
Growing this purple was easy Going most of the way, Only drawback was she grew so big it was hard anchoring her down in the basket from the tilts, but once she was down she put on a show. Her heavy Buds were thick, hard oozing resin was potent and sticky I quickly scooped up some falling Trichomes from beneath my tray Loaded my chamber 220c and 8hrs later I finished my day.Probably could have taken half that time had i not loaded that first bowl then the next....... 😎 Just a tad over 12 Oz on my quest to hit 1 pound per plant. Some exciting Donated Seeds Coming My way. Stay Tuned Find out who they are and What I'm growing next, Going to be some exciting shit. Thanks for following😍
Likes
86
Share
@Hawkbo
Follow
These are doing pretty damn good for the most part. I figured out with the green buzz the only thing in bloom that raises ppm is the base bloom and the more PK which is good to know. Also been using lower ppm for the autos and they seem healthier than usual. These pics and the video were taken on Day 36.
Likes
12
Share
@Styx231
Follow
Day 65. Fungus gnats back. Letting soil dry completely. It works to get get rid of them. Buds are fattening up nice. Was going to do flush this week but think I’m going to feed couple more times. They are responding well. Tricombs are milky. Two more weeks I’m thinking. OG kush looking good and green. Getting frosty. Day 67. Feed all plants. Starting flush in a Day. OG got bloom nutes. Day 68. Flushed both purple Lemonade. OG kush has a while to go. Day 69. Feed OG kush.
Likes
61
Share
Plants were growing so fast I snapped the main heads on 4/5 at a 90 degree angle and they have bounced back already. These are growing so fast I am going to have to mount the light directly to the tent bar on the roof of the tent. All of the plants are showing sex but one is showing it’s sex half way up a branch instead of at a node and the bract is separated from the ovule as shown in the last picture, very strange mutation. Apart from that all in great health and looking promising
Likes
8
Share
@Rich2083
Follow
Tapered off the nutrients over the last week, now down to just the bloom supplements for this week then just water to finish. Harvest is getting closer now and I'm so excited to get these babies cut, dried and cured!
Likes
39
Share
👉this is week start of week 8 and the switch to the 12/12 schedule. the plant is on the 6th week on the GH nutrient chart for its flora series drain to waste schedule.This is considered early bloom and the only difference from the transition nutrients is the reduction of FloraGrow and addition of Liquid KoolBloom. The water I use is RO water from a medical grade industrial machine (not on site). Its conductivity is .04ms. Its 98.5% pure water. I believe this is helping me mix my nutrients at full strength and achieve the middle to upper end of the recommended ec range. The volume of plant uptake has increased quite alot. I am averaging 2 liters two times a day, but as the week progressed a couple of high flow fertigations were needed to keep the run off below +30ms. I feed my Marigold plant the run-off after Ive measured it. The fertigation station is in a closet in another room and doorways wipe my memory so I fed 99 the runoff a couple days ago (9-16). So I fertigated 1.5 liter immediately. That runoff was close to 30+. The lights were going out so the next morning i fertigated with 4liters. That runoff was +10. That night was 2liters w/.9 liter runoff +10. I plant on keeping the flow a little high to help prevent any nutrient deficiencies while its doing the early flowering stretch. 👉The plant is lush and green and growing as a nice round bush. Stout main stalk and is 21". I began plucking lower leaves that were reducing airflow around the base. These could pose a mildew risk if left on because they are in contact with the pot and reducing airflow across the top of the media. They were shaded now by the expanding branches above so it was time to remove them. I like to take leaves gradually, one or two per fertigation event. I also have taken off the bottom 3 branches. They were healthy and had plenty of potential bud sites...but they would be in the shade and never meet the potential of the upper buds. I may take two more low branches, but I will keep them if they keep stretching outward and upwards and stay in the direct light. When they start flowering full time I will have removed as many of the potential larf bud nodes on the interior of each branch. Nothing extreme, just the basic lollipop on the bottom and reducing larf production up top. 👉I am using a cordless work light to make the pictures better. My phone camera flash isnt bright enough to over come the LED blurple and the addition of the very bright work light makes the picture way better. As you can see I will still be taking some of the pix with the LEDs on, but also use the camera flash and the work light and that helps bring out the green better. But lights out show a more detailed realistic image and I will include more pix this way. 👉Switching to 12/12 has been a challenge. I work varied hours and making it home before lights out is hit and miss. Also being a stoner I forget stuff if I get distracted by a movie, a sporting event or a shiny object, so visits to the tent during dark times will happen. I have green lights installed in the room and in the hallway. I have a good headlamp with green LEDs. I missed the first day and had to fertigate after hours...sigh. I took pictures with the green light on but no flash.