Likes
Comments
Share
Getting very tall, I thought this one would stay shorter?! This is my go-to night time pain relief with good sleep strain. She will be staying indoors for safekeeping so hopefully I can guarantee to have some flower from her.
Likes
3
Share
@Passx
Follow
The plant is in his last phase of flowering and after this week I'm stopping giving nutrients to it, The plants looks good, the older leaves are turning yellow and the pistils are 40% brown,
Likes
2
Share
@TTerpz
Follow
Start of week 12: 4/29/25 Fed with nutrients: 4/29/30 Fed with plain ph water : 4/30/25 Fed with nutrients: 5/2/25 Fed with ph water: 5/5/25 End of week 5/5/25
Processing
Likes
7
Share
@Kenethica
Follow
Shitty weather wooooooop, too cold and too rainy. they have been sitting inside mostly near the window with the CFL as support. Not ideal but I'd rather have less bud than rotten bud. That being said they are fattening up nicely. Trich show more milk and the occasional amber (only saw 2 to be honest). Lower nodes are still pretty clear and still have lots of white pistils. I am thinking 1 more week of feed then start the 2 weeks of flushing. Having a hard time watering them evenly with all the LST straps. Expecting a tiny watering can one of these days to get that even watering job.
Likes
3
Share
@Kanokpalm
Follow
After my 1st Scroging it's not bad to me 馃榿 but now she look too hot and Nitrogen too much I flushing and waiting to look forward 馃槄
Likes
15
Share
Likes
16
Share
Camar茫o que dorme a onda leva! First grow just done, making the first planting with the BSF - Green Tiger strain, they were born well and all beautiful, always accepting suggestions, still learning!
Likes
2
Share
@kissrubb
Follow
Buenas cultivadores.馃 Esta semana corresponde al d铆a 22/08/2024, por acumulaci贸n de trabajo chicos me ha resultado imposible poneros la semana antes pero ya vamos normalizando las cosas, pronto pondremos la 1 semana de floraci贸n ya que las pusimos antes de completar la semana 4 de crecimiento debido a un crecimiento salvaje de las oreoz馃お馃お. Hemos regado con 1l en dos oreoz y en una 600ml, el resto de plantas se han regado con 500ml todas, se ha fertilizado con 10 ml de crecimiento boom, 10 ml de ezym boom y 5 ml de silic boom con una EC:1.4 y PH:6.00. Este 28/08/2024 ser谩 su primera semana de floraci贸n y veremos a ver que tal est谩n y cuanto han estirado, en la semana 2 aremos una defoliaci贸n y si es necesario una poda de bajos, hasta la siguiente growers馃
Likes
4
Share
@IamCy
Follow
Week 2. Just the normal stretch. Nothing eventful. After this week, I'll be giving random weekly updates due to my busy schedule.
Likes
48
Share
@xbrico
Follow
Day 36/Flower Day 8 - Starting to get them girle bits showing now. Stretch is still unreal but the smaller nodes that have crept up to the top are thickening their branches so that鈥檚 a good sign they'll hold something and if not, have a spare elasticated SCROG net for support, which will DEFINATELY be needed by the looks of things!!! The main branches are sitting near as thick as 1 of the stems of my last grow so these girls are definitely sturdy and strong growers! If only they didn't push for the roof!!! Apart from the one SCP (#2) that is staying squat in the back corner...sub nodes getting up there but the "tops" staying low and bushy!!! When I start to see a few more flower sets/bud buttons proper actually forming, I'll start inching up the lights to 13/11 over the week...still tempted to start it now but thinking best to wait til the bloom nutes get upped drastically (which is next week - will be upping them by about 50-60% volume). Feared a bit right now that the extra light may fuel some stretch rather than fuel the flowers...but then again, having the plants acclimatise to 13/11 by the time the buttons are forming may not be bad...but then again, that 13/11 may slow down their formation!!! Choices and Choices!!! Was expecting the flower initiator would have knocked some time of the pre-flowers showing (can't think now if nodes were asymmetrical before flip...honestly couldnt have vegged any more though...or could I???) but nope, hopefully the buttons start to set quickly now though. Apart from that, all going well so far. Been a bit of a drop in the temps outside and clearer nights so hopefully that helps bring day temps and night temps down a bit - bringing down humidity some too. Need to restart my CO2 Jug now for the flowers and keep on watching them grow! Happy growing all! 馃挭
Likes
30
Share
@BudXs
Follow
We shall see. So far, both plants are similar in stature. Obviously larger fan leaves on the one that wasnt plucked, but a tonne of growback at day F5 on the defoliated one. Non defoliated one seems to have some thicker stems. The final weights will tell all
Likes
46
Share
@einamio
Follow
Week 9 (November 4-10) Day 57 Watered ~1750ml. Data sheet suggests we have two weeks left but I haven't noticed any milky trichomes yet. I removed two smallest branches with tiny flowers that were really underdeveloped in hopes she will spend this energy somewhere else.馃槶 Day 58 I wish I could bring all the buds to the same height but mistakes were made and some of them will never properly grow. The ones at the top look great. I think the plants look as healthy and happy as they could be in a 40x40 tent 馃槑 Day 59 Removed a few more leaves and one more tiny hidden branch. 馃拃 Buds keep growing. Day 60 Can't really see much happening. Day 61 Watering ~1800ml. Removed a few more leaves and one more tiny flower. Checked trichomes under the microscope. It seems they just begin turning milky with most of them still being transparent. Slightly increased nutrients. I'm trying to figure out where to dry her when time comes 馃檧 Day 62 They both look good, so far no deficiencies spotted 馃樆 No hassle today, nothing gets cut. I'm looking for a social club for anonymous growers with plants under 30cm, where we could share our problems and look for understanding. Size doesn't matter, guys! 馃懞馃樈 Day 63 Lower buds pistils are still all white... so far no signs of amber heads. Flowers seem to be growing. Removed some more fan leaves and tried to slightly reposition a couple of branches that were getting too close to each other.
Likes
15
Share
@Uwish
Follow
Nothing special, everything is actually working. Clearly once my water was at the right temperature, no more worries. The flowers arrived at 12/12 + 11 with the trichromes that pop, it starts to be pleasant! So of course, I'm not going to break any records on this RUN but in any case, I've eliminated a lot of "novelty" and mistakes that I'll make more. I'm counting on the run I'm re-launching to blow all that up, I'm going to go for a performance goal The stretch is off to a good start, it should settle down around 12/12 +21 - 28, so I will place my second net next week. I have done a defoliation. I change the soup in 2 days, so my solution lasts 10 days. I have a slight over-fattening, but really nothing serious, I will switch to an EC of 1.8 - 1.9 instead of 2.0. and I will observe. Here we can see the delay of one of the plants, it's as if I was shooting with only 3 plants. Next time, only one strain, same size of cuttings and passage by cuttings and RDWV DIY mandatory before passage in the V-system. Next week, I change the brand of fertilizer for the RDWC, I go to Athena, I will introduce the PK of Athena which according to their recommendation starts at the 21st day at a rate of 2ML/L. I turn with the base sensi bloom a and b + athena pk Otherwise, I receive the parts this week for my RDWC DIY system for growth, I'll make it with my friend and I'll test it and I'll give you a feedback on the next update, especially since I'm going to restart right away, I'm going to do 10-15 days in cuttings and then I'll go to the RDWC DIY system for growth until I finish the FLO of the V-SYTEM and then I'll go straight to the next one. I'm going to put my LEDS at 80% which is the MAX recommendation of SANlight without c0虏 ( I don't forbid myself to grow at 100% in week 5-6, I'll see... )
Likes
10
Share
@6toecat
Follow
Adding water level checks to the NodeRED code to prevent pump from running when water level is too low. Read more here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony
Likes
41
Share
High, finally, after 65 days of flowering, they were ready to get their final cut. I flushed 16 days. Harvest took about 7 hours with 2 scissors. 馃槉 https://www.youtube.com/watch?v=r03V9OEJlgg It were 630g of dry buds. More small fluffy buds than the last grow because I didn't LST. Next time I'll do LST again. I passed the 1g/W mark, so yeah, I'm happy. :) See you soon with my next grow...
Likes
11
Share
@blackcald
Follow
One more nice week. Defoliating and trimming by cat 馃ぃ. About nutrients in comments, its my first time and plagron do fine i think, i have zero problems.
Likes
8
Share
@Canna96
Follow
Hey now, hope everyone is having a great weekend. This Purple Punch didn't break soil until 4 days from getting wet. I ended up with a slightly mutated Purple Punch Seedling as she has 3 Cotyledons instead of 2. I have friends who have had this and they told me they turned out just fine yield and terp wise just really based more on the phenotype than the fact that it was genetically mutated. She is in a Solo Cup in ProMix/Perlite under the Spectrum X at 30% Power which is 230 Watts in V1 or Veg Mode. Very happy so far with the light as it is keeping all nodes tight and all leafs green and pointed upwards. I will also this Purple Punch's roots to fill the solo cup and then I will transplant her into a final 3.4 gallon airpot and hook her up to an auto feeding halo coming from a reservoir. When a plants roots are just fertigated in soil they are lacking in oxygen until some drying takes place. In Coco Coir, they have the perfect ratio of H20/Oxygen just after watering and as long as the Coir stays somewhat saturated. This is why high frequency fertigation pays off in coco coir. My plan is to top her one time by day 28 or so at the latest, or at least before she starts flowering, so whatever node that will be depends on her growth between now and then. Thanks for stopping by, be safe and Blaze On! Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
9
Share
@p0ntman
Follow
I like this girl so much I cloned her and have another batch on the way very pungent plant and very sticky not a very tall plant with lots of fan leaves seem to be very pest resistant Started trimming Plant 1 - 164.0grams top bud only Plant 2 - 163.0 Grams