Likes
Comments
Share
It's a quite jungle, but I like it wild. New tent is postponed to next week, I really need it though, those plants would appreciate getting their artificial sun dose, instead tryingto push through the roof. Tried another way to take photos, but until we get more room, they're gonna be whatever.. Light schedule is still 13 hours, I should probably change it to 12 soon, though target is still one month and then reduction to 12 h. Nothing got topped this time, maybe I should've, but the new tent will bring some workaround room. I'm still trying to understand the plant behavior and their limits.
Likes
4
Share
11/10/2025 18:45 Everything good this week,full of Sunny days and temperature raised to 22°C during days and 12 °C during nights Plants are enjoying this climate even with cold nights,they will not be so big at the end but the quality Is on point #1 Coco Milk 84 days from seed This one has small buds pretty dense but glistering in resin ,the top nugs are greasy at the touch leaving the fingers sticky and smelly Didn't check the trichomes but they look like there Is some amber,the smell is super strong telling the finish Is near maybe earlier than i expected Brought a friend with me who has grown much more plants than me,also he tells the smell and the look are amazing,the flavour is fresh,deep,complex to describe I say it's like a good shampoo flavour when you enter in a barber shop not so pungent but creamy like a coconut milk exactly as the name says,AWESOME!!! There are some spider nets i think there will be some problems if this situation keeps going like this #2 and #3 Coco fresh 72 days from seed This plant keeps going fast even with cold climate,the buds are really fattening a lot and so dense Resin production Is not on point by now but It has to consider the late start of flowering,this plant Is blooming from only 30 days The smell Is now coming out,not strong but good fresh and flowery Leaves are starting to show some problems and the under sides are all purple with only a part of some leaves turning to a blue/deep purple colour Sorry for the bad quality of the last video,battery was running low and the final result Is pure lag😂 Next time i will bring an identifier and check,obviously Coco fresh will be the last one standing,if this keeps bumping maybe will end her life in november
Likes
37
Share
Yet again another amazing run from the blue cheese. Barneys really got it right with this strain. Dense, frosty, smelly, Big heads literally everything i look for in a strain. Not too mention the high is the best! I love a good cheese smoke and harvesting this strain just as the trichomes fill with milky cloudy colours I fell gives the best high. Energetic and uplifting and just all around amazing! 10/10 would recommend!
Likes
18
Share
im literally seeing them once a week. growth exploded since last week. started giving pk booster by hand watering. buds start to form. defoliated lots of fan leaves. first compost tee is being brewed.
Likes
20
Share
@Rob96
Follow
Still doing really well this one, buds look amazing and the smell is really really pungent. Really pleased with the topping on this one, tops all over and all really good strong tops. Around 3 weeks left to go so last week for nutes and will be flushing at end of this week, getting ready for harvest now really really excited to see this once all done.
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.
Likes
2
Share
@Oldwied
Follow
Here we go... Light Power: 60% Day 31 Photoshooting Topping
Likes
Comments
Share
Se encuentran dos orugas muertas y no se detectan nuevas hojas con mordidas (día 36). Se aplica bacillus thuringiensis por segunda vez, 4ml/L. Se reorganizan las macetas dentro del indoor (día 39).
Likes
22
Share
Day 69: Watered each plant with 1.5L with nuts 1379 ppm, 2951us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1391 ppm, 2959 us/cm, 2.9 EC (gorilla cookies) 1L 319 ppm, 678 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Still flushing all the strawberry banana and 2 purple punch with flawless finisher, 2ml per L. (1st week flawless finisher, 2L each, 2nd week clear water, 150L each pH tap water) Day 71: I've been struggling with the humidity, always around 70%, I can't turn the lights off at the moment. I lost one of the main fans during 2 days, and I found mold on all the tops on one purple punch and on the smaller strawberry banana as well. First timing having this issue! High humidity plus not enough air circulation equals this. Mistakes happen for a reason. Need to start rethinking my whole air circulation, exaustor, fans, etc etc. I removed the infected buds, I used a magnified glass to help me do the job better. I did everything like the book. Already have 3 fans on the tent, let's see how it goes. Humidity between 65-75% Day 73: Watered each plant with 1.5L with nuts 1458 ppm, 3101us/cm, 3.1 EC (2 wedding Cheesecake and 1 gorilla cookies) 283 ppm, 602 us/cm 0.6 EC (3 strawberry banana, 3 purple punch and 1 wedding Cheesecake) (2L each) 2 different feedings for the 10 plants Still flushing, 1st week flawless finisher, 2L each, 2nd week clear water, 150L each pH tap water) Everything running smooth, they are starting to show the colors from the flush I've been doing. Day 75: Watered each plant with 1.5L with nuts 290 ppm, 617 us/cm 0.6 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Day 77: Watered each plant with 1.5L with nuts 1811 ppm, 3810 us/cm, 3.8 EC (gorilla cookies) 253 ppm, 538 us/cm 0.5 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Still flushing... Going to cut some of them this week.
Likes
Comments
Share
@A-C-H
Follow
Der Geschmack ist wirklich süß, ein bisschen wie gebranntes Karamell oder süßes Popcorn.
Likes
13
Share
@kush3
Follow
La tercera planta o fenotipo 3 a crecido de forma mutante👽, el resto las otras 2 bién😃 Día 21 desde germinación
Likes
19
Share
@Wenz004
Follow
Die Woche getoppt und von 0.5 in 3 l umgetopft. EC unter der Woche leicht auf 1.1 erhöht...mit etwas mehr AllinOne.
Likes
2
Share
@Enki_Weed
Follow
Dienstag war auch für diese Pflanze ein wichtiger Meilenstein – sie ist jetzt ebenfalls im Blüte-Modus und genießt den 12 Stunden Licht- und 12 Stunden Dunkelheit-Rhythmus. Kurz davor habe ich auch hier die Entlaubung vorgenommen, um sie optimal auf diese neue Phase vorzubereiten. Die Wasserzufuhr wurde wie bei der anderen Pflanze angepasst und entspricht nun den Empfehlungen für die zweite Blütewoche. Ich bin wirklich erleichtert, dass das Problem mit dem pH-Wert endlich der Vergangenheit angehört und das System stabil läuft. Diese Pflanze hatte es am Anfang wirklich schwer. Ich hatte sie leider überdüngt, was dazu führte, dass die Blattspitzen verbrannt waren und sie generell recht klein geblieben ist. Aber sie hat sich erstaunlich gut erholt und zeigt jetzt ihre ersten Blütenansätze, was mich sehr freut! Das aktuelle Sorgenkind ist allerdings die Luftfeuchtigkeit. Sie ist momentan leider viel zu hoch, und ich muss mir überlegen, wie ich das am besten in den Griff bekomme. Das ist jetzt meine nächste große Herausforderung.
Likes
4
Share
@AustinRon
Follow
OG 4Q24 Seedling Bolt III Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Dec 25, 2024 CR2 4Q24 1:B:1:1] End of Week: [Tue Dec 31 , 2024 CR2 4Q24 7:B:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ Week’s Objectives: - IFF We’re still HAND WATERING, ADD First Resin Bloom to Full @ 4ml/gal. - We can’t replace RLA’s Carbon Component with/out ~300 ml/Gal Ful-Power (Fulvic Acids) We WON’T be doing that. Rather, we’ll see a diminution of Carbon provided, look for 3-5 days to stabilize after switch to auto-irrigation. EC Starting Water: ec: 0.0 mS/cm, pH: ~7  __ Wed Dec 25, 2024 # Christmas Day OG 4Q24 15:B:2:1 Watered late tonight (~2200). - NO RUNOFF - Barely the beginning of Burnt Tips - Grew 2” overnight - raised light 2”, Canopy Distance is 19.5 @ 77% (770 ppfd) After Watering - With REDUCED Light, Plants are FRISKY Leaves raised (but no fingers in light sockets) - # We’ve got Pistils (Noted Yesterday) - Ceasing Foliar . . . IT’s been good. ;-} Runoff: NO RUNOFF Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml]  Standardizing Lighting __ Thu Dec 26, 2024 # BOXING DAY OG 4Q24 16:B:2:2 Scotoperiod: [ 12, h] EC: [ 2.4, mS/cm] Temp: [ 79, °F] RH: [ 68, %] VPD: [ 0.85, kPa] NOTE: If we’ve no runoff today, Water AGAIN at Midnight, Install Auto-Fertigation Tomorrow Raised Light 6 Clicks - Grew 2” Overnight - Light Distance ~20” @1900 - Fertigation Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml] IPM: - [x] Zymes Bomb - Top to Bottom, including Airpot Sides.
Foliar DRENCH w/ Zymes at 1:31 water dilution. Drenched top and bottom of leaves, stems, JOINTS, Coco Top, and spraying down ALL Airpot Side Holes, and BOTTOM OF AIRPOT. Letting the girls run up to 82°F, RH @ 69%, VPD ~9. Plants are HAPPY w/ EC: 2.4, w/ Moderate High Lighting (~770) If they’re happy before lights out, and I know it - Let’s raise light to 80% (800 µMol/m2/s), adjust airflow for overnight Temp (Humidity Down). And call it a night. After Raising light to 83%, REDUCED again to 77% @0600 __ Fri Dec 27, 2024 OG 4Q24 17:B:2:3 Runoff: [ 500, ml], EC: [ 1.7, mS/cm] Raised Light 6 Clicks (Grew 1.5” Last Night). Light Distance back to ~20” 1.5 Gal fertigation - let’s do 1900 & 1200  Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] After 2:30 Feeding - Raised light to 83% __ Sat Dec 28, 2024 OG 4Q24 18:B:2:4 Temp: [ 82, °F] RH: [ 68, %] VPD: [ 0.96, kPa] Light Distance: [ 19.5, “] Fertigation: RLA Heavy, Flower Week 3; EC: 2.4 Notes: - Evaluate 83% Dimmer at Lights On - Back off to 77% if any indication of Light Stress - Let’s ramp to EC: 2.7 mS As max. Beyond here, we probably don’t have sufficient CO2. Light Intensity (IDEAL): 83% # ~830 µMol/m2/s EC: 2.4 422 ml/plant, runoff, EC 1.5. Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] 420 ml/plant op Crinkly LOWERS - EC Too High Too Fast? __ Sun Dec 29, 2024 OG 4Q24 19:B:2:5 EC: 2.3-2.4 The Max Hydro comes in at 2.36 EC. RLA Hydro Chart set 3.4. How Can Be? DROPPING SILICA SKIN from RLA Hydro (Eliminate Brown Patina, and Small Orifice Build-up) RLA Hydro  Nutrient Element Ratios ppm mS/cm NER N 262 0.5 21.8% P205 143 0.3 11.9% K20 476 1.0 39.7% Ca 214 0.4 17.9% Mg 48 0.1 4.0% S 57 0.1 4.8% Si 0 0.0 0.0% C 333 TOTAL 1533 2.4 100.0%  
RLA - Full - [x] Complete Irrigation Install Defoliation I We want to eliminate All Vegetation from TOPPED NODE (3) Down. - [ ] Count NODES FROM SPLIT - [x] Measure Plant Heights: 11 - 17” - [x] Remove Each Pot and Trim OUTSIDE OF TENT (Get it RIGHT!) - [x] Can we adjust the pot positioning to get ONE UNDER CANOPY Fan? - [x] Eliminate FANS and Growth tips NODES 1 - 3 (3 is TOP SPLIT) - [x] Eliminate FAN LEAVES from First Node of MAIN STEMS - [x] INSTALL DRIP RINGS (No Manifold, Yet) - [x] Apply LABEL to Each Plant - [ ] Consider Eliminating FAN LEAVES from Second Node of Mains _______ Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 54.1, ml] # EC: 2.4 MAX - [x] Photosynthesis Plus: [ 24, ml] - [x] Quillaja 60 Powder: [ 0.25, tsp] - [x] SLF-100: [ 15, ml] Time Set Initiate Complete Event 1 18:45 18:45:25 Event 2 20:05:00 20:05:25 Event 3 21:25:00 21:25:25 Event 4 22:45:00 22:45:25 Event 5 00:05:00 00:05:25 Event 6 01:25:00 01:25:25 Event 7 02:45:00 02:45:25 Event 8 04:05:00 04:05:25 Event 9 05:25:00 05:25:25 CHANGED TO 25 SEC EVENT (from 20) Tuesday - / / / __ Mon Dec 30, 2024 OG 4Q24 20:B:2:6 - [x] Harvest Dehu Water Continuing to RAISE LIGHT ~ 2”/day (6 Clicks of the support ratchets). Runoff: - [ 422, ml, plant!!!!] # Reduced Event duration to 20 Seconds (from 30). - [ 1.4, mS/cm] Lowering light to 70%, see if lower fans relax. They’re electric. :-). They relaxed. Inner fans surrounding apical stems are laying @ 30°, rather than Reaching for 60°. I have perhaps been overnighting. HUMIDITY IS CRANKING. It’s impossible to get VPD above ~8.3! Trying to keep humidity below 68 drives Temp below 78. I forgot about the part. ;-( Dehumidifier is ON, Doors are Closed, Room Vent is CLOSED. Dehumidifier is delivering 50%RH to the room. Orange Gasm is quickly filling the air with moisture. At MIDNIGHT, Raised light to 77% ( ~770 µMol/m2/s] pH Adjusted 2 Gallons of Filtered Tap to pH: 7.2, EC: 0.3 (Used for Dilution when refreshing reservoir with DEHU and Fresh Supplements. __ Tue Dec 31, 2024 OG 4Q24 21:B:2:7 @0630 Took a peek in the tent. SCANT RUNOFF @ 20 Sec Feed Events. JUST Touched TIPS (Burning). Bumping Fertigation Events to 25 Seconds, after Feeding 9 * 5sec (45 Sec) To bring DAYS delivery to 25 Seconds. Check Reservoir: - We’ve 4 - 5 Gallons. @LIGHTS ON - Reset Light Height - Reduce light to 73% (See if we can avoid more tip burning) Harvest Dehu: - [x] Amount: [ 5.7, l] - [x] Primer A&B: [ 27, ml] # For EC: 2.4 mS/cm, Nailed it, First Try. ;-} Orange Gasm likes to SPREAD when Topped. - Which makes her a funny candidate for SOG. ;-} 
Likes
96
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds Well we are just 49 days and folks shes doing pretty good 👌 I've had some uptake issues over early into the grow but there doing much better 👈 So I gave them a light flush and then switched to there new brand of nutrients and began there new regiments 👌Just need to remind myself to take it easy 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a UR45 to the mix👈 www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A+B Agrogardens Bloom A+B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
20
Share
@Suemchen
Follow
she's outside all the time 🌞 Day 99: watered with rain water and 1 ml/l Cal Mag 👌🏻 Day 101: Flushed her today with rain water 👌🏻 Day 103: did nothing today: she's waiting for harvest
Likes
16
Share
Que pasa familia, vamos con la séptima semana de floración de estas Mental Rainbow F1 de Sweetseeds. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/21 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 100% de potencia. Tengo visitantes, trips que combatiremos con control biológico. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco este 100% con el proyecto. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
33
Share
Absolutely beautiful !!! Smell amazing. 🌳🌳🌳
Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
23
Share
My aggressive bud-blocker removal has resulted in an unruly bush who is trying to over-grow her space! My hopes are that she can keep herself contained for the rest of the grow lol 😂. I've done a LOT of defoliation to try and help with the humidy and airflow in the tent. Her bud sites look happy and healthy, and her branches are super strong! 💪 She is drinking a TON of water. I find myself adding a gallon every 2-3 days!