The Grow Awards 2026 🏆
Likes
58
Share
Hi everyone ☺️. Today the New Aeroponic Diary begins, as before with the wonderful variety Gelato from Zamnesia . This time I planned to leave the full 8 cuttings instead of 3 as in the last run. For test purposes I would like to give a very short vegi time this time. To be precise, I would like to switch them to flowering a few days after rooting. Since the growth is extremely extreme on Aero, I think that a few days will be enough to get 8 little trees 😋. Of course everything is documented and uploaded. Today the cuttings were cut, brushed with clone gel and placed in the aero system 😃. Of course, the entire system was cleaned very time-consuming with disinfectant after the last run, and all seals, pumps, etc. were checked for their function, so that the new run could start today 👌👍. As with the last Aero grow, the Canna Aqua range 😊 serves as nutrients. I wish you lots of fun when you start the diary, stay healthy 🙏🏻 and let it grow 🍀👌 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Processing
Likes
9
Share
@Kushizlez
Follow
Everything is coming along nicely. I had some major hiccups in early flower that will probably be detrimental to my yield but at least now I know better. The two blackberry breath plants are by far the best plants in the tent. The garlics aren’t filling out like I was hoping they would and the I don’t think the cheese is going to fill out either. Getting some good terps but it’s just so airy. The slurricane looks ridiculously frosty and has some beautiful gas terps but she’s a runt, isn’t going to yield much and the powdery mildew is getting worse. I’m going to rearrange the plants in the tent to see if the pm is being caused by cold night temps or genetics. I gave one last synthetic feed to everything. I might give one more half strength depending on how done they look around day 48. I see some nice purpling and fading start. I started a new round of seeds for my next run. I’m popping the rest of the blackberry breath’s and some other random beans I had lying around. Check out my other diary if your curious. I just ordered a 12 pack of gelato 41 x dosido from Archive genetics for $290cad!!! I knew these elite Cali breeders were pricey but come on...
Likes
13
Share
Welcome to my Strawberry Cola Auto by Exotic Seeds Both SCA are nearly on the same track. I uprooted 1 and decided to put them both into 1 8L pot. As the plants grow i'll LST them 1 to 1 corner and 1 at the other end. Before they progress too much into their veg, the 8L of soil in an 18L pot. Without disturbing the soil as much as possible. I have something i put down the sides of the pot and upturn them bringing out the whole base of the substrate sides without the sub falling away from the sides, then they'll be transferred directly into an 18L pot. Lifting the sides up, and hopefully this will hinder any excess stress that you don't want to put on any auto as it'll most likely stunt them and hinder their possibility of giving a substantial harvest. Both seeds are on days 5-7. The 7 day old one was uprotted, so I expect a day or 2 stun, so they should be on or near the same growth rate. So far, I really like the way these autos are growing. I had fastbuds straw cola and tbh, I'm not a big fan of this flavour so, hopefully this strain will have something that charges my perspective. Decided to give them a dose of artios touch for any stress. Thanks to my sponsors Mars-Hydro & Spider-Farmer for allowing me to use their products. This is my 4th run with the FC 3000 and my 2nd crop with my SE5000. I'll be doing 9-11 mothers and 6-7 autos X 2 so 12-14 autos in 2 stages as the females go through a 4-5 month grow.
Processing
Likes
4
Share
Noticed some slight yellowing and the white blemishes on a couple of the older plant's leaves were getting bigger. I believed the white blemishes were do to a cal-mag deficiency and added that to my feed. Also was using 1/4 nute strength and now bumped up to full to counter the yellowing. Started LST this week too.
Likes
3
Share
Mother: to the older sets that are in pot Gonna transplant dem new mother by the end of the week or next week...jus letting LST do it thing since I already started it New cutting first visible root in 8 day off of water only gonna hit them with a rooting mixture before end of week
Likes
5
Share
@PhatRobs
Follow
She looks good. 2 gallon pot is 100% rooted completely out! No real smell just smells green!
Likes
7
Share
@JandM
Follow
Not much to say this week they only grew two inches last week so the stretch is over now. One of them is getting really frosty the other not so much but it is a little behind schedule since it sprouted crooked and took a little over a week to fix itself.
Likes
11
Share
@Chubbs
Follow
420Fastbuds FBT2304 Week 9 What up everyone. Weekly update on these beauties. Getting some fade in the leafs on the bigger one and having to feed her almost 2x what I normally do of 2000ml about every day in a half. Besides that they seem to be on cruise control through the flower stage. The main colas are definitely swelling up as one could hope and to think they probably both have another 2 weeks before harvest it'll be interesting and exciting to see how big they'll turn out. Nutes will be stopped this week and they'll be getting only ph'd water for the remainder of flower. All in all Happy Growing
Likes
12
Share
Looking great, I'm able to appreciate where they are rn, the speed of development. Waiting for the male pollen sacs to develop more before removing them. Plant on using the pollen for 3 plants another Gelato cake of the same phenotype, a Gelato cake that is a different phenotype, and a purple monkey balls.
Likes
18
Share
@Joni2017
Follow
hot days🔥🔥good rhythm 👏🏻💪😋 Continue with only water in the irrigation 💦💦 temperature 28º C☀️😅 Humidity 65%💧defoliation 🍃 and music 🎼 😉👍 Day 46: aerating for each liter of water 15 gr of compost tea pk booster and 5ml Orgatrex 24 - 36 h😋 And mini cooler installed👏🏻👏🏻 😉👍
Likes
17
Share
@FireRGB
Follow
Die ersten Tage ging es sehr schnell. die Samen gingen in 2 Tagen auf 5-7 cm. Es wurde von beginn an die Sanlight Evo auf Stufe 2 mit 18 Stunden belichtet. Ab Tag 10 wurde das Licht auf Stufe 3 erhöht. es wurde jeweils mit immer 1l gegossen das mit 1 ml Biobizz gedüngt wurde. Ph des Wassers war korrekt. 3 Pflanzen schauen sehr gesund und kräftig aus. nur eine Pflanze lässt sich noch ein wenig zeit. es schaut aus als ob diese 1 Tag zurückliegt obwohl alles gleichzeitig begonnen hat.
Likes
14
Share
Likes
5
Share
Mar 31st Week 16 Mar 30 Changed nutrients to straight Dense Bud Compactor 1 gram / litre @ 900-1000 ppm April 1st I will add the rest of the nutrients to the exiting solution and check on ppm level April 1st changed nutrients from straight Dense Bud Compactor to full range all listed nutrients Added 8 litres of fresh water + 6 litres of the existing Dense Bud solution to come up with a mix concentration of 1100 ppm Hopefully this will be the shit!
Likes
5
Share
Processing
Likes
7
Share
This ladies look absolutely gorgeous and super strong, they're gonna be flipped into flower tomorrow on February 15th when they'll hit the 30th day since they were planted and the first day of flower! As said, I have flipped this ladies into flower on February 15th so now I think we're gonna see a beautiful stretch specially on this 2 plants which are the biggest one in the tent, very nice genetic, cannot wait to see their performance ❤️💛💚👨‍🌾 stay tuned everybody! This is gonna be a beautiful run! ✌️
Likes
22
Share
@Prilyfe13
Follow
April 20, 2024 Happy 420 Everyone! A new diary for a new contest by Seedsman! Sit back, because there's a lot to talk about today. Just like all of my grows, this run will have daily updates with pictures, a weekly video and as much detail as I can muster in the stats. Let's get started. First off, let's talk about the setup. I have 4 plants in my main tent that won't be done for a couple more weeks. So these ladies will be starting out in an AC Infinity Germination Center with their Germination grow lights, a heat mat and a small computer fan to keep the air fresh. The DLI will be around 12 mol/m²/d. They will be planted in root Riot Plugs until they show roots. Then in their final 3 gallon fabric containers. Then into the Mars Hydro 2x2 tent with the TS600 light. 100 watts of pure power. Haha. This should only be for a couple weeks. Just enough time for them to be well established. Then they will go into my AC Infinity 3x3 tent with the S33 grow light. 240 watts of power. I have 2 oscillating clip fans running a slight breeze at all times. I'm using a 4" exhaust fan with filter. I'll be using the AC Infinity bottom feed wick system. I've been using it for quite a while and I find it to extremely efficient. More about this later on in the grow. Let's talk about the strain. Sour Diesel Auto by Seedsman. This strain should be with us for the next 8 to 10 weeks. In my experience, add another week or two just Incase. We can expect a really good yield if I don't screw anything up. Up to 650/m². She has some environmental requirements. Heat is the main thing. Slightly humid for the veg stage and dry for the flowering stage. Being a sativa dominant strain, she will grow tall. I'll be implementing LST and light defoliation for this plant without a doubt. That's about it for now. I'll describe characteristics throughout the run. Finally to our actual ladies. I'm germinating 5 in a glass of water. I plan on keeping 4 total. That's all my tent can fit. So I'll do away with the 5th and work with the 4 best seedlings. They should sink overnight and start to open up. As soon as I see the tap roots, they go in the Root Riot Plugs. That's all for today. See you tomorrow. Oh, and thanks for reading. Wish me luck on this journey. It is a grow off after all. Lol April 21, 2024 4 of the 5 seeds have sunk to the bottom of the cup with my assistance. The 5th one I still floating. However, I don't see any tap roots, so another day or 2. I may pop the sunken seeds in the Root Riot Plugs tomorrow afternoon. The 5th seed may be the reject. If it doesn't pop in a couple days, I'm calling it a loss and working with the 4 other seeds as I originally planned. I could also go down to 3 plants, but I frankly would like the even number of 4. 1 per quadrant. We shall see. I wonder if I should do three 5 gallon plants or four 3 gallon plants. We shall see. The biggest obstacle will be the tight space I have to work with for the next 2 to 3 weeks while the plants already in there are done. I plan on dry trimming for a faster dry. Normally, I like to hang the whole plant. This time around will be wet trimmed and hung in parts. OR placed in my bud drying rack. That's large enough to hold all 4 plants' buds. I should also mention that these seeds are in constant darkness until they go into the plugs. Kind of obvious, but these diaries are not only for my records but set up as an educational piece of work. The environment is looking fine. The air temp is 82°, but the water is definitely no where near that warm. I did have to drop the exhaust fan down and increase the heat mat temp to get the water temp up to a proper temp. Germination Center Environment: I'll be keeping the temp around 82° and the humidity doesn't matter for now. When it matters, I fill the bottom of the Germination Center with water. It helps perfectly with the humidity for growing seedlings. It will also help regulate the temp to around 78° to 79°. April 22, 2024 All 5 ladies have sunk to the bottom of the cup. Now it's just a matter of time for the taproots come out. Somehow, the Germination Center was cold this morning. Like 68° cold. So I took the riser off the dome and cranked the heat mat to bring the heat and humidity up. That being said, the seed water is much cooler than I want. I like warm water for germination. Oh well. The heat mat should fix things in a matter of hours. Everything else looks good. Germination Center Environment: Currently it's at 77° and 94% humidity. It should level out to about 80° and the humidity should stay about the same. I also took the fan off the dome. I'll put it back on when they pop out of their plugs. April 23, 2024 All 5 seeds popped. They all have tiny taproots just starting to form. This is when I plant them in the plugs. They should take a couple days to break surface, but definitely germinated. Now it's just a matter of choosing the 4 best looking seedlings. They are now in the Root Riot Plugs with the temp at 77° and humidity at 95%. The dome is on without the extension for now. Once they show leaves, I'll install the extension and turn the light on. I'll be leaving the light on for 24 hrs. While in the Germination Center. Once out and established, I'll change it to the normal 18/6 light schedule. I was considering starting at 18/6 from the beginning, but I've tried that and feel like it wasn't as successful as 24 hours. Especially because these are autos. The kickstart of light makes total sense. We will see if my theory is correct. Germination Center Environment: Temp: 77.4° RH: 95.4% VPD: 0.15 kPa April 24, 2024 Nobody hopped surface yet today. I don't even see green in the plugs yet. I'm definitely not worried about it. I expect them to break surface in a couple of days. Maybe tomorrow or the day after. Honestly, I won't mind if they take a little bit longer and I can keep them in the Germination Center for a bit longer. It will work out best for my whole grow operation. Small as it is. I gave each seed plug a bit of filtered water today. Just to keep the moisture up. It shouldn't matter too much. The plugs are pre-moistened, so there shouldn't be any issues there. I'll be turning the lights on when I start to see green. They will be on 24 hours for the first week. Then into the main light at 18/6 for the rest of the grow. The environment is a bit bouncy while I work to get the system right. The heat mat is perfect a it's setting, but the fan needs to be messed with and the dome port needs to be adjusted as well. So far it's not too bad, but the temp keeps dropping below 75°. I'll keep a closer eye on it while I get it to acclimate to the proper total environment. Germination Center Environment: Temp: 80.4° RH: 94.7% VPD: 0.19 kPa April 25, 2024 Some ladies are starting to show green! Today we have 3 of the 5 ladies breaking surface with the shells. One of them is absolutely going to have helmet head. Or whatever it's called. I'll be needing to fix that. I'll wait til tomorrow to see how things go. The other 2 are still working their plugs. That being said, I reinstalled the dome extension and turned the lights on to 20% power. The DLI is around 10 mol/m²/d. I'll increase the light power in a day or 2 when the rest of the babies pop up. We should end up with the DLI of 12 mol/m²/d when we start seeing leaves. The environment hasn't been the best. Not my best start by far. I can't keep the temp at a good range. My night time temps are super low and then I get a decent day temp, but then it gets too hot. I'm going to have to figure out the heat mat I think. It's back to normal now, but was like 65° last night. Not good. With the light on now, the temp shouldn't be a problem. Germination Center Environment: Temp: 72.6° (too low) RH: 76.8% VPD: 0.64 kPa April 26, 2024 So far I have 4 ladies fully showing with the 5th lacking any movement. She mush not have actually popped. Or maybe a little late. I'll give it 2 more days and see what happens. Anyway, I think I already have my 4 plants now. They will be labeled A through D. Everything looks great for now. The environment is looking great at 80° and a humidity of 82%. I won't need to mist them at all at this rate. Maybe when they get into the nursery bags I'll need to mist. We shall see. I'll be leaving the light at 20% for another day or two. Then I'll increase the intensity to 12 mol/m²/d. It should start this run out swimmingly. One of the babies had a helmet, so I gently removed that this morning. Other than that, nothing else for the day. Germination Center Environment: Temp: 78.7° RH: 80.0% VPD: 0.69 kPa April 27, 2024 This is when I normally would start a new week, but these ladies are only in the very early seedling stage. Not on veg. Honestly, I would love for a seedling stage week. Now I'm kind of stuck until I see the first set of true leaves. Another few days no doubt. So it throws off my schedule. Oh well. I'll do my best to keep track. I have 1 seed that rooted, but never grew up. I'm calling it a loss for now. So 4 of 5 seeds made it out of the plugs. I also have a 4th one that is super wonky. I'll keep it for now. If it looks all messed up over the next few days, I'll have to toss that one as well and just work with 3 plants. Hopefully it won't come to that. The 3 seedlings that are looking good, look really good. Roots already starting to get exposed. They will be going in the 1/5 gallon nursery bags in a matter of days. Maybe even tomorrow. I don't like too much root to show before transplanting. So that may be a thing tomorrow. I'll increase the light intensity when they are transplanted. It makes the most sense based on the speed they grow. The environment is pretty good. Hovering at a temp of 80° and 87.4% humidity. I also gave them a small misting to keep the humidity up and the babies getting all the water they can get without overdoing it. Germination Center Environment: Temp: 81.2° RH: 88.9% VPD: 0.41 kPa
Likes
81
Share
@Hou_Stone
Follow
it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5. There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket ------------------------------------------------ -Daytime temperature: 24-29°C -Night temperature: 22-27°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 "houstone3" for: TS LED Grow Light, Tent, Ventilation for 3% off "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits for 5% off https://www.mars-hydro.com/?acc=hou-stone
Processing
Likes
3
Share
Beginning 5 weeks of flowering, I will soon share a video of the two bitches