Nothing but colas on all 3 this is going to be a big harvest. Another 2 or 3 weeks max.

Week 7 (10-3 to 16-3) 10-3 Temps: 17.5 to 21.8 degrees Humidity: 57% to 70% 11-3 Temps: 18 to 21.8 degrees Humidity: 61% to 65% Watering #2: 500 ml. 12-3 Temps: 17.5 to 21.7 degrees Humidity: 57% to 66% The individual ScrOG project is done! I attached the screen to the #1, the #2 will be done tomorrow! I had to do some Supercropping (HST) to the plant to make everything fit. Set the light to 40% strength with a distance of 60 cm. I didnt think about the poles of the tent, so its not fitting perfectly, but i will fix that tomorrow! 13-3 Temps: 17.6 to 21.2 degrees Humidity: 56% to 64% Watering: Both 1000 ml. Attached the screen to the #2 and did some supercropping aswell. The screens fit perfectly now, i am very happy with the end result!! 14-3 Temps: 17.2 to 21.1 degrees Humidity: 58% to 69% Watering: Both 330 ml. (Only Calcium added) 15-3 Temps: 17.2 to 21.5 degrees Humidity: 60% to 71% Watering: Both 1000 ml. Set the light from 40% to 45% strength. 16-3 Temps: 17.5 to 21.6 degrees Humidity: 64% to 70% Progress of 2 White Widow's in the same tent: https://growdiaries.com/diaries/254339-green-house-seed-co-white-widow-grow-journal-by-blazed

02.02.2024: Heute ein paar erste Erntebilder... 1 1/2 Pflanzen habe ich bereits fertig. Die Erntemenge ist nicht so hoch, wie im letzten Grow, wird sich aber wohl etwa bei 300g insgesamt einpendeln. Bis jetzt sind es 680g Nassgewicht. Weiteres gibt es dann, wenn ich mit der Ernte fertig bin. Auch weitere Fotos kommen noch Update 05.02.2024: Die 3 Dos Si Dos sind jetzt fertig. Es sind nass aus 3 Pflanzen etwa 1190g nass. Jetzt fehlen noch die beiden Glue Gelato. Leider sind die Pflanzen sehr klein geblieben, so dass sie nicht so viel Licht bekommen haben. Die Menge wird entsprechend kleiner ausfallen. Aber auch dazu wird es noch ein Update des Reports geben.

Hey guys, Like I said last week, this week was another cold rainy week. Discoverd some budrot on my Shamans, but not mayor problems. Therefore I decided to Harvest my Shamans at the end of this week. Knowing that in the upcomming weeks it will get even more colder, more rain and more bud rot. Luckly I only gave them water and one time with Humic-Blast and enzym+. Thats not a proper flush but better then full nutrients in the soil/plant. If it wasn't for the colder climate, i would had let them flower for another 1 to 2 weeks because they really started to thicken and the flowers were swelling. But at the end i rather have smokable buds then budrot buds,,, Weather for the upcomming week is 70% to 92% rain with 11-14 degrees Celcius and at night even 7-9 celcius. So there is no point by risking all of my buds to rot, in hope for some swelling which may never come with this colds The Critical Kushes where in their 4th week of flowering, going into the 5th. I have no other choice to keep them at least for another 2-4 weeks, lets see how it goes. I don't mind spending nutrients on maybe a lost cost. Somehow GD minimalize the videos after putting 10pictures on the diary, Just click on the next picture and click on the right arrow to go to the videos. See yall next week :)

Will be harvesting her in the next few days.

Well, it was my first diary here, and I'm really happy to had found this amazing community that is so eager to help! It gave me the opportunity to win the first giveaway in my life 😂 And it was from RQS! These seeds are in my new grow diary, and I really thankful for all the gift received! A special thank to Pol from the RQS staff! A special thanks to everyone who watched me grow here, and I hope to contribute with the community more and more!

Hello my friend, ...June 14, 2022..Day N°84... ...Flowering day N°38... My Feminized Tatanka Pure CBD is beautiful and fine. The flowers developing very good. I gave her water with a tablet of Easy Bloom Booster from RQS Organics Nutrients. She's under a Mars-Hydro Tsw 3000 at 70% of power and at 25cm of the canopy. www.royalqueenseeds.com www.mars-hydro.com That's all for now my friends, thx for passing through here. Wish you the best with your green projects. See you soon..💨💨💨

Plants are looking good. Hope they get a little thiccer.

GSC is basically done, just waiting for 10% amber trichomes GG4 and Kush look like they'll be while before there ready for harvest

Day 74 - Cheese - Been watering with only clean ph every 3-4 days and watching the trichomes. They're mostly cloudy with no amber. Just gonna keep watching and letting it swell. Super Lemon Haze - Buds are coming in nicely. Purple leaves coming in near the top. Gets cold in the basement at night, so I'm not surprised with a bit of colour change. The tip burn doesn't seem to be moving too fast on the leaves it effected and the rest of the growth is coming in nicely. I Think there should be only a few weeks left now, so probably one more nutrient feed and onto flush as well. End of week 11 - For my first grow, I've already made it far past my expectations. Love growing and love these plants. Stay tuned for cheese harvest!

The plants are all doing amazing ! When you open the tent it smells like fruit loops. There is some red color in one of the phenos now and it looks gorgeous. The red one seems to also be intent on producing the largest buds. I took a look under the microscope and saw purple trichomes :) The buds are all insanely sticky and resinous. I am using chopsticks to tuck the larger colas under the scrog because if I touch it my hand smells all day lol. No signs of nutrient stress or light stress at all. The plants are getting watered every 3rd day. I am really enjoying the Medi One lineup from Green Planet, I have noticed a huge difference in overall plant health and vigor since I switched to it.

Aunque dejaron de crecer a lo bestia como lo hicieron en preflora, 25-30 primeros dias a 12/12h. han seguido creciendo hasta ahora y esta semana me tocó volver a calzarlas todas para que estubieran a una misma altura. Esta semana viene bién cargadita de nutrientes con tres riegos , dos o tres dias entre uno y otro, según veo o creo que lo necesitan. Seguiré regando mitad mitad, agua de grifo / destilada . El primer riego de la semana 3 ml/L de top Candy y un pelin de ácido cítrico para bajar el PH. EC 1,03 , PH 7,00 El segundo riego con Bud y Bloom, 1,5ml/L y 3ml/L respectivamente más ácido cítrico para bajar PH. EC 1,30, PH 6,9 El tercero con Delta9 y callMag. 4ml/L. y 0,5ml/L respectivamente más ácido cítrico para baja PH. última poda de hojas abanico, 2 o 4 de cada y poda de yemas para que no compitan con los apicales que reciben luz. También me tocó fijar mejor los troncos con alhambre de jardineria para que estos no se doblen por el peso y pierdan por aquí algo de energia. No tengo claro si fuí capaz de disminuir el exceso de nutrientes por lo que durante toda esta semana y hasta final de flforación se mantiene una EC baja. mezclando mitad agua del grifo mitad destilada y así consigo mantener esa EC . El haber regado en crecimiento y principio de flora con un agua tan dura y alcalina hizo que las plantas muestren el aspecto que muestran

So these girls have gone wild after some lst and one being topped they are just surprising me more and more! The topped one has taking flight to the moon 🚀🚀🚀!! The runt is growing and show her self off as well. The stacking on the topped on is pretty insane much props to fastbuds for these genetics!! Also shout out to growace for the system and it’s been doing it’s job can’t complain about anything major a few little things they can fix which will be said in my final review of the product! Well that’s it for now growmies much love and hope all is blessed

I started germination of 3 Sweet Zkittlez beans on 29/12/2020 (now sweet zenzation). I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! Some background information on my experience with Sweet Zkittlez. I've only grown this one out once. Did her up in a 1 gallon SOG grow. It had a very impressive main cola. With quality bud structre and trichome production. The plant had a very luring sexy odor. I was very satisfied with the results. The variety got extra hungry for both p and k mid flower. A little bit needier but definitely worth the extra attention. Very excited to see the results in a full size plant. Giving thus a variety a chance to show me full swing.

Bruce Banners are frosting up heavily and stacking dense buds, but close-ups shows tip burn and leaf clawing after the recent stress.

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

One week more the bud turning into purple smoothly

it returns to pre-flowering, let's go🍀