Weekly update on this amazing strain. Theze lovly ladies really surprised me this week. They're turning out to be some great looking plants. Veg was a little worrisome but I'll take it. All in all Happy Growing

Really good week with lots of growth. G1 is very frosty and is starting to put on some weight. Her phenotype is purple with a very gassy terpene profile. Can’t wait for her buds to fatten up. G2 is producing trichomes. She is green with a sweeter aroma. I defoliated both plants and removed the bottom third and some popcorn buds that wouldn’t get enough light. Frostbanger is stretching very tall and is towering over the others even if i raised them a bit. She is starting to flower so I hope it stops. Watering 2L every other day, added some calmag as I noticed some deficiency on G1. Light is at 100% at 40cm 800ppfd

The prefect plant if you want something fruity with a short flowering time! This plant explodes in thc and even considering she was not in optimal conditions. I had some bugs, trips to be precise, so i applied neem, but the concentration was too high so i burned some leaves and stems 🤦 Finally the yield was highly affected due to the above mentioned, still the buds are amazing, highly covered in snow, specially from the smaller clones i had, the suggestion is to use support to ensure the plant can manage the buds

Chopped and I'll hang them in the he dry tent and keep it around 60rh/17c for as long as I can. 🤑 Update: got the tent at 15c/61rh and wow the buds have a different type of firmness than before. I can't wait... So far my best grow of the 3

Never used it . Bug on site.

Start of week 3 blueberry is flowering and the stretch is almost over. The seedlings are growing nicely.the box got up to 100f this week during mini heat wave had to put ice blocks in rez to lower temp down from 80f. I look forward to the 3 other new strains I’m running. My GSC seedling is looking a little pale I should have waited longer to change rez over to bloom nutes. I have top dressed some organic fertilizer near drip line of nutes 4-6-4 one month release. I applied to all seedlings except blueberry. I reduced blumat on gsc, ww, and ch until surface dried a little bit as my gsc was showing signs of overwatering. Gsc is starting to green back up. My bb had to nanners i plucked them I hope these are all. It could be from the high temps or the one night I had a light leak. BB larger plant receving 1000 ppfd.i turn light back down a notch Gsc leaves started cupping now she’s getting just 550 along with other seedlings.will continue to monitor for improvement and ramp lights up a little later if needed as plants should grow into light.

The plant of course is much more smaller with the restricted root zone causing a bonsai effect. However, she performed really well under the circumstances with a relatively large yield all things considered. I usually smoke high CBD but was very impressed with this high. Let's see how it goes after spending more time under the influence. Review... Growing in the solo cup sized container proved to be much more challenging than a regular grow. The plant soon became stressed dealing with the tiny root zone making everything hyper sensitive. The first issue was showing as tip burn even though the ppm was kept in the 650-850 range. Then the leaves showed a general yellowing overall specially showing at the bottom fan leaves. At this point I was changing the nutrient solution every 2-3 days trying different nutrient brands and concentrations seemingly without much success. It was a nerve wracking period which ultimately lead me back to General Hydroponics with amendments. I did learn that the plant can weather the storm even with less than perfect vegetative leaves while she focuses all her energies into calyx production. It’s was upsetting to see less than stellar health but eventually all the leaves drop and the flowers power on seemingly without issue. The cascading diamond structure developed as a result of a couple broken branches that occurred during the training process in an effort broaden the plant profile with wider lateral spacing. Although initially upset when the fractured branches that withered after being bandaged up and . After removal of said branches it was exciting to see the new possibilities. The cascade formation called for additional side lighting to maintain uniform bud size all the way down the front lower end of the plant. I was looking to create a stadium like effect. The experience of operating the visual hydroponic unit called for a number of practical adjustments along the way. Although initially, very excited with the system concept as an integrated design with nutrient solution supply and gravity drain through the pump, with the air supply inside the pipe with the air bubbler acting as the drain/root filter... in hindsight, obviously, it would not work as the root mass became denser and denser. The first issue, as the path of least resistance, the air was forced back down the nutrient supply pipe. This prevented the pump from priming itself and subsequently no nutrient solution delivery was even possible. As a result, the original air stone was left in place to prevent the roots from entering the nutrient tank and a new bubbler stone simply added to the tank itself. Although the original idea was for the air to be continuously pumping directly through the roots, the flood and drain would actually be just as good when drawing the fresh air in and out with each pump/drain of nutrient solution. The ON cycle was initially set to 10 seconds which eventually became 30 seconds as the roots mass grew denser. This proved to be too unreliable as the fill level was no longer consistent which required constant monitoring to be sure that there was no flooding over and above the container lid. It which case, a simple feeder tube to the top of the root zone was the best option. The ON cycle was set to 5 seconds with a 15 minute OFF interval. Overall the biggest concern was the timer itself, which had several bad reviews for malfunctions with growers losing their plants. However, I have no choice as this was one of the few timers that was capable of cycling down to the second but it all workout fine in that regard… no problem. Was it a perfect grow?... no, definitely not. However, as a relative beginner, it was definitely a great learning experience. Mostly, I need to work on the nutrient blend and concentration. For more control, a backup tank with float valve delivery to maintain the water level for this particular system would be a good idea as well.

Finally got the RDWC system complete and the girls are in and under the LEDs. Started with the LED light elevated higher than recommended; didn't want to cause light burn. About mid week I bumped the TDS up to 350 and lowered the light elevation to 18 inches and they responded very well.

Back to moving the plant in and outside. Bad weather coming up😕 This week was average, a few good sunny days but also cold nights. Started up with the green sensation and alga bloom. There are fan leaves that are showing a pretty quick yellowing. Not so healthy and green anymore now 😁This is maximum week 5 of flowering so it's a bit too soon to be losing leaves like that.. I'm Thinking she has a N defenciy because I barely gave grow nutrients since it was in the soil for the first 6 weeks. Second thing is a lack of light for those leaves. the Alga Bloom has N in it so I hope they revocer it a bit. The leaves on the buds themselves look good so it's probably the plant using the leaves for nutrients in this stage. Let me know what u guys think....? Update, look at the video, dirty bugs😠😠😠 caterpillars I think🤔 took away some infested leaves. And some of those fuckers. Hope it doesn't get worse Buds are starting to thickening, she has a little smell on her too by now. They already have some brown pistils on them. Nice plant but I hope the yellowing doesn't go to fast. 1,5L water with 4ml alga bloom and 1ml of green sensation was given this week. Will continue to give this for the next 3 to 4 weeks. Happy growing friends.

03/27/22 Plant one is recovering amazingly thinking of starting a little low stress training. Plant two has started to show slight signs of nutrient burn and has not grown as fast as plant one but I think I caught and corrected the problem in time.( Fingers Crossed)

So Friday will be day 70. I messed up a lot, did lst and used big pots so I'm thinking these might go 3-5 more weeks. They smelled so amazing a few times today though. First the purple punch, then the sour diesel, then the girl scout cookies, each gave off aromas one after the other a few times today. The purple punch smalls so sweet and delicious.

Week 6 for Fuel D.OG by seedsman Shes still very happy in her 5L pot, Shes been getting fed every 2/3 days with some FPJ, Regulator, Enzym+ & Startboooster by @aptus_portugal just to give it an extra boost😇 I've topped her a few times now she reacts so well to being topped. She's at 14 tops ATM😍 Waiting for the lowest branch to catch up in height before i do any topping to it. Shes also ready to be transplanted into a 25L pot but unfortunately none available atm... have to wait for the autos outside to be done. She's in my top 5 for this season for sure. Cant put my finger on what she smells like exactly but there's definitely some funk to her stem rub😁

Bubba cheesecake is just about ready still have a few clear tricombs and some amber ones. she is on week 9 of 12/12 and she is almot ready about 3 more days then ill harvest her.

Tag 7 - Ende der 1. Woche. Die Pflanze wurde bisher nur mit Wasser besprüht.

28/11/22 - first week of bloom starts today, looking at doing another defoliation to free some sites up and removing small sites from the lower canopy - defoliated all of them quite heavily hopefully for the last time, removed small sites from the bottom

Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs

~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 6/18- Week 12 and the Wedding Cheesecake Fast Flower from FastBuds is on a mission! The amount of growth happening right now can only be described as explosive, with new shoots appearing and existing branches going crazy with growth! 6/20- Our summer is here and we're under an early heat wave this week with daytime temp's hitting the mid to upper 90's ℉ with heat indexes in the low 100's ℉... in short, IT'S FNG HOT!🔥🔥🔥 I'm watering the Wedding Cheesecake FF daily now with 5-7g of straight well water from the garden hose. I'm watering at sundown so that the water will have some time to soak down into the soil before the heat evaporates it. The coating of straw that I previously spread over the soil has helped a lot as well. 6/22- The weather continues to relentlessly bake everything outside... many thanks for a good A/C!❄️ The daily watering continues and I also went ahead and removed a bunch of foliage that was below the trellis net. 6/24- Today I top dressed the FastBuds Wedding Cheesecake FF with 2 cups each of Gaia Green 4-4-4 and 2-8-4 along with 1 cup of Down To Earth Bio-Fish 7-7-2 and 1/2g of Wiggle Worm castings. After top dressing and working the amendments in by hand I replaced the straw coating over the soil and watered them in with 5g of straight well water via garden hose as usual. There goes another week for the Wedding Cheesecake FF and it won't be long before she begins to show signs of pre-flowering! Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

.

Día 1 y todas geminaron vamos a usar lst a todas y algunas lst y poda apical Día 5 desde puesta en sustrato Solo pulverizó

no