12/13 Week 17 and the end of the run for the Killer Clones their time as rulers of the Tent is over. New Vid - See , because I like the damn song These girls as something All in flush just waiting on when I feel like taking 1 first then 2 12/16 Weather warming a bit so.... Harvest FF-10-1 tomorrow morning she has done about all one can expect Harvest the other once that one is dry 12/17 Harvest day for FFT-10-1 12/18 Due to the weather, a warm up, going to harvest FFT-10-2 in the morning and get it dry before the cold moves back in to stay. So this wonderful grow comes to and end with the sun.

2 bubba cheesecake looking lovely 🧀

What can i say the maui is charging it handle my little heat problem this weekend alot better than my TSA plant (trans siberian auto). I topped her once and have her tied down im gunna try and let her veg until the TSA is almost finished then ill flip the light schedule just so she can grow up big and the autoflower still gets 20/4 for most of its flowering stage. Im thinking about scrogging this plant im going to let it veg for a really long time so everything can grow up sortve tall so when i flower it i can make it a giant. Ill vaeg it until my tsa is harvested than flip it. THE GIRLS ARE LISTENING TO NEIL YOUNG

привет садоводы началась 4 неделя растение выглядит хорошо , цвет листьев хороший

Lemon tree can endure pain, cold & hot weather, seedling is really a strong genetic, huge root mass for 2 week seedling, now I'm using Biobizz soil + dry leaves on top from past harvest

Dico solo una cosa. Peccato aver comprato un solo seme :(

Vamos familia, estamos en la séptima semana de floración con estas Purple Og Kush de DutchFem. Las vemos con un buen color, bien sanas y van engordando y progresando correctamente. A subido un poco la altura pero no afecto tanto, ya imagino que seguiré dándole de comer porque pedir piden, una semana más por lo menos. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/55% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

Time for another update! During Week 9 Light defoliation on bottom canopy Added 1 heaping tbsp of GEO Bloom dry amendment 3-12.5-9 with regular PH'd water Watering every 3 days with 1/2 liter of water or more. Trying to keep soil moist without drying out. Seems to be improving the plants Plan week 10 Installing ViparSpectra XS2000 light to help with better light coverage in the 4x4 tent Going to keep RH around 45% and keeping up with airflow Planning to put in dehumidifier in upcoming week if necessary Weaning down on light defoliation at this point. Happy with how these girls are doing! Hoping the new light set up with the ViparSpectra XS2000 will make a difference in yield this far into flower. Trying to combat a little bit of light burn happening at the moment as well. Thanks for checking in! See you next week

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂 1/18 11:58AM. BRAM STOKERS TRAILER PARK DRACULA........I SHOULD BE WORKING ON THE PLANTS BUT THIS IS REALLY GOOD. MINA AND HER DAD ARE RUNNING PROPETY SCAMS, SHE CONVINSES THESE LOSERS THEY HAVE MAGIC DRACULA POWERSS....AND WE STEAL THEIR TRAILLER. REINFEILD RANDY , JULIANFIGURES IT OUT AND BLACKMAILS BOTH OF THEM. AND MUSICAL GUEST KISS!! A GREAT HALLOWEEN EPISONDE.... OH I FORGOT I AM SUPOSSSED TO BE GRWOING PIT.

Coming along nicely now apart from alittle cock up yesterday where I accidentally topped her while trying too lst but I have managed too tape the stem in place so I am hoping my little cock up will force the lower branches too shoot upwards while the broken stem heals , This week I had too change my lighting too 600 true watts of kingbo dual optical LED range due too the temps getting closer too 30c than I would like , and by doing so I have now got a constant temp of 27c lights on and 18c lights out, Update on day 4 or week 3 , My little cock up snapping the main stem while trying to lst the tape seems too have really don't the trick , and although snapping the main stem is not ideal lol , It seems I've managed too top this plant and still get too keep the top , the leaves all look fresh and healthy and feed so I will leave the tape on there for two weeks and then try and remove it as all I had too hand was selotape lol The breakage really do not seemed too affect the top 2 nodes at all apart from trigger the lower plant too stretch out , as this break was bad , like hanging on by a thread bad , so really shocked it took too the repair so easily , and as always I had just been leaching the soil with a single feed that lasts them 7 days , my set up is completely automated and I only go too the grow space once a week but I have a WiFi cam inside the grow space so I can check the temps and how dry the pots are just incase I need too increase the feeding , but too be fair these autos seem too have a mad feed at week 7 and 8 and then drink one feed per week , keeping it simple has helped I think as the plants seem too love it , and I don't need too do anything apart from check the camera , And that's just the way I like it , I pay special attention too the temps in my grow space and a calculator in hand for the nutrients , Other than that I leave them alone too do what they do , I will take some end of week 3 pics over the weekend at some point it's abit of a drive so once a week suits me down too the ground , :) Update on day 5 of week 3 well as you can see from the photos this week has had a huge raise in production , the breakage I did too the main stem has completely healed it's self and the plant has bushed right out at the bottom and top of the plant where it broke , So all in all my little cock up has actually helped the plant grow larger , I today gave them a smaller defoliation basically anything covering a branch that could not be tucked under it I removed , This is too get as much light too these spots as possible too get them too develop before flowering starts , But so far so good , temps are good and no nutrient burns on any of the plants , and the results from day one / first feed on green buzz nutrients too this photo today day 5 is dramatic , the photo of all four was before defoliation , but the defoliation has just shown how busy they have this week and the bud sites on this things already is crazy , my next plan this week is too put the net in there and space out all of the branches too give the best spacing between the breaches

I'm all out of room!!! Lol 😆😆 these girls took over and got crazy big!!

A week with lots of activity from my side, from the Gorilla's side, not so much. She stays behind and I can't find any other reason than genetics/seed quality. She is in exactly the same conditions as the other girls. I'm letting her do her thing. She will give some weed, well see how much. Maybe she is a late-bloomer. She does look lush and healthy so we do not understand but are learning. I put in the scrog net since her roommates need it and lowered the lights and started giving more flowering feed. The light is still awesome, the amount it puts out. This SP- 3000 rocks and, wallet permitting, we will go for a second one. @MarsHydroLED might be so happy with the amount of coverage we give them, they'll send us another one 😏 If you haven't seen it yet and you are in the market for new gear, check out the Black Friday super sale on www.mars-hydro.com!! We are gonna see what happens coming weeks with this strain. So far I am a bit disappointed and didn't expect this from this strain. We will never know if it was the age of the seeds or something else. What I do know is, it was the last time I use a third party seedbank, it is apparently too hard to keep fresh stock with too many strains. Until breeders put a production date o the packaging. Isn't it time someone said that? Cause lets keep it real, we are talking seeds that in any other case would have a cost of production of fractions of cents per seed. We pay what? 3 to 5 to maybe even 20 dollars a seed for an exceptional strain? Is it then too much too ask to put a friggin expiry date on the package? Or store them cooled? The breeder that does that and arranges a deal with third-parties that overstock can be sent back, packaging recycled, in exchange for fresh stock. Like any other fresh trade. For an industry making what, a billion worldwide, it is remarkable how many are still in the stoner with a garage / 80's trailer park, backwater funfair warranty, kinda customer service. Me: i grow organic weed for 30 years, these seeds were old Seed dealer: Yes but you failed to do a raindance on the rising moon, no refund. Me: but its for cannabis? Weed industry: Yes why we charged you double! Me: wow no germination after paying 20 bucks for seeds? Industry: They are all stoners, they won't notice.... Me: but this bong is made from toxic plastics? Headshop: yeas but it has this crumbling image of a leaf, 20 dollar! Can they get their shit together? For god's sake, I've seen crack dealers with better PR and customer care. Someone do sumtin, take us out of the car boot era please?

Holy 😍

She is loaded right now very heavy and potent yielding plant oh yeah thanks 420 fastbuds I will be getting more of your seeds you rock Guys im so happy I boughy fastbuds seeds It was great to see this second seed pop an amazing grapefruit we did fiming and she eneded up with many colas and many flowers plus super frosty and smelly Also turned purple all buds which to us was a surprise and did not expect that Since last grapefruit was different than this Thanks a lot for all your support Imagine if we had a full spectrum light I think we would be growing trees Honestly we have more than we expected COMING from an Indoor thats nearly located in a tropical climate of 30/33 degrees most of the year and with that said raising temps very hot sometimes very humid thats close to the equator So we have to use A/C all times and maintain humidity levels by spraying all walls to keep it around 45/60% while ac is on remember droping temps so we have to make it as comfortable as possible and that its not easy in this side of the world OR either you need a lot of money which I dont have yet to build a super setup and a separate ROOM with all of that temp and great humidity lvls so yeah we do what we can with our budget We live somwhere where things are pretty much fckd up but it is what it is Hey at least we are safe because it is illegal lol so yeah brothers we have hard times And still with all risk we here doing our best Showing all support Showing im greatful TO find a space like this where We all can share like and Comment And help each other grow better everyday Blessings to you all Keep EM buds coming Happy growing

Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself

Thanks bro Cactuss for this amazing Pakistan genetics💪