Hi... So this is my first time taking things a bit more seriously. Open for tips and advice. usually looking fore flavor rather than production. First week on 250w Also, pics are taken with the mobile... better pics next week

Hola a todos, En esta semana 3 de floración la planta sigue engordando sus cogollos purpuras. Ha dejado de crecer para centrar su energía de producir sus flores, que presentan buenos tricomas.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Finally started blooming! Hope the main-lining baby will folow others, loooks a bit scanty now.

This journal is now current as of 7/1, and this entry is for last week (June 23-29). Growth is continuing to be explosive on the Blue Dream--she is now 37 inches. This last week, however, received 3 days of rain and very heavy winds that I thought would kill the plant. The video shows just how bad the wind became. She shows signs of overwatering (spotting on fan leaves, though new growth looks fine) which is to be expected given that she received 3 days of rain and had no chance to dry out. Nevertheless, she persisted. 😊 I added the first netting to try out a scrog method. It's definitely not going to be perfect, and I'm definitely an amateur experimenting with method. Will attempt to develop an even canopy. GSC and Green Cush continue to grow reliably.

Welcome to week 4 of flower for the outdoors grow. Green Crack and LSD are continuing to pack on buds, the plants are still hungry and I've stepped up the total amount of feed I'm giving them, #gaiagreen power bloom. Thanks for stopping by growfessors 👽🌳💚

Updated the official lab result for this specific plant... thank you spliffseeds, its great to know what youre smoking... Its amazing how a 55 cm plant can yield 120+ grams of dank dry buds, important here was the training and filling the cannopy, scrog net would help me in terms of supporting her coz as you see on pics i harvested her after 3 days of no liquid and she just fell down coz buds were to heavy... and throughout the process i had problems with holding branches in one piece lol so i had to do all the funny bondages with green wire, sadly i dont have pics coz i couldn make a clear photo of how and what did i connect together.

This is the start of the end of her life now im going to push her till the end of this week as I have flawless finish by advanced nutrients and that let's me push her to the last 7 days and then ill flush with flawless finish for twice before I crop her.. stay posted it's about to get dank in here

Hello everyone, brother gardeners. welcome back to queen peaky's diaries this week we saw how autoflowering plants reacted to the high stress technique now the buds are re-emerging from under the scrog net

Hey everyone 😃 Today is the 42nd flowering day. Both phenotypes continue to develop great 👌. For me they should have been a little bigger. But since I have cuttings from both, I will let them grow longer next time 😀👍. The buds also continue to grow vigorously 😀 and already smell very sweet 😍. I am very curious how the coming week will continue and until then I hope you have lots of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Everything is good without any problems for now. One plant seems like the leafs are sightly burned 😰 but it did'n get worse in past few days and it grows healthy so i think it will look better next week 💪 Today is day 7 of the plants, yesterday i transplanted them into the main 15 liters pot with organic soil mix 👌 Today i also added some Voodoo Juice from AN to help the roots involve. They say it is good for organic gardens and i got it from one of my past grow. Stay Blessed with sacred plants 🙏 May start some new diary with different seeds, but same growroom soon 👋 I almost forgot, my photoperiod is 12-1 thats why my plants have only 13 hours of light every 24 hours. For me it worked perfect in the past, if you want to read more about this photoperiod https://theweedbusiness.com/12-1-method/ here is some short explanation. Less energy waste 🙌 and organic product is a different level for me 😁

Day 107 Flower day 51 - Have been flushing for about a week now, was trying to pull another week but I couldn’t keep 2 of them from falling over so I decided to chop them this morning! Will be letting the 3rd one go atleast another week or too & I will compare the differences after cure! Make sure to check back for more updates, thanks for following & happy growing friends🙏🏼🌱✌️🏼

Yellow big leaves . Buds 🙂 ok . No nutrients start flush with bud Candy . Great happy qeens 😍 best wishes 👏

Welcome to my FastBuds GSC grow-off diary! I plan on growing 2 seeds from the same package - one using a 950ml Gatorade bottle dwc system, and the other sharing a 64L reservior DWC. I'll grow them both while trying to be as simiar in techique as i can, but i'm more interested in how the 950ml does, so might not be super picky about doing things exactly the same, heh. I'm making this all up as I go! Enjoy the ride! Week 0 ====== Day 0.1 - 2 seeds in water for 24hrs Day 0.2- 2 Seeds in wet paper towel, in a plastic bag for 24-48hrs until taproot is out Day 0.3 - 24hrs later - one seed has sprouted a tail Day 0.4 - 2nd seed sprouted tail; put both seeds into rockwool Day 0.5 - 1st seed sprouted from rockwool Day 0.6 - 1st seed doing well, 2nd seed no change Day 0.7 - Checked 2nd seed and hasn't budged, so it's a dud. Started a new seed (had 3 GSC, so all good!) Day 0.8 - 1st seed into the 1L DWC bottle! Day 0.10 - 3rd seed germinated - into rockwool to sprout. DWC Prototype ----------------- - 950ml Gatorade Bottle - 2x small air stones - 1/2" overflow tube where i want the water level to be - Nutrient top-feed line The reservoir below is 19L (~15L of solution) with a small 80gph water pump on lowest setting, which will be on a timer for 15 mins every 3 hours (at first - we'll see how that goes). The water pumps nutrient solution up to the Gatorade bottle and the overflow goes back down into the reservoir.

It’s been plenty of work for me this week,,with final LST moves made,,which is always tricky trying to space evenly,, plenty of lumens making their way to the right spots now after a good defoliation session,,and this girl has no excuses,,,,!!! backed off the bloom food a little aswell due to some unwanted discolouration ,,but gave her a good flush with some fresh water and great kelp tonic i got my hands on,,,Day 60 now 👍😎

hice trasplante a mi oasis, ahora se encuentran en maceta de 7 litros definitiva, agrege en su abono azucares, dentro de unos dias hare cambio fotoperiodico

Der Start in Woche 8 ist regnerisch und bewölkt bei kühlen Temperaturen und hoher Luftfeuchtigkeit 😳 The start of week 8 is rainy and cloudy with cool temperatures and high humidity 😳 Day 62 "Haircut" for "Hilde" 😏😉

week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress