This grow is going to be testing my coco based auto watering setup. The plants will eventually be going into 2.5 gallon airpots which I cut to be very tall and narrow which I hope will give great performance for this grow style. Nutrient solution will be pumped from a 5 gallon bucket to halo-style drip emitters 4 times a day for 5-10 second intervals. I am going to try to use inline flow control knobs to dial in the watering and allow for slight runoff every fertigation. For lighting I am using my HLG 100 watt lights, one per plant. I am a big fan of these quantum boards, they have given great performance I. The past! Thanks for reading! 🌱👍 May 13 day 1: the Blackberry breached after germinating in a rapid rooter for 2 days. I am impressed with how quickly this seed popped! It had a stuck seed that was gently removed, and will be falling off the rest of the way shortly. May 16 day 3: Seedlings planted with their rapid rooters into coco filled seedling bags, and given first nutrients. They are remaining under humidity dome. I have also started running the drip emitters to test them and dial in the amount of runoff. It is also continuing to buffer the coco so the medium will be well prepared for my seedlings when the time comes. Day 4: the seedlings are doing well so far, so I will keep them domed for a few more inches of growth. Then I will switch to a humidifier to maintain acceptable RH.

Wow, I had so much fun growing this. I wasn't even going to grow this at first. I planted it alongside 2 11l pots and a 20l and knew I'd run out if space but thought I'd put this 5l in the tent and experiment, but it's been my favourite so kept it. I never had much experience, tried one outdoor grow last year that flopped a bit so invested in an indoor set up and I'm happy I did, it's been worth it and can't wait to get started again. I took a real laid back approach, no nutrients, little LST and just let it do it's thing. Had some issues at first with stretching and then adjusted too much and it started bending. But it recovered well and just so excited for my real first harvest. Can't wait to try it.

December 29 day 15, growth is fine, I will likely top the plant later in the week. Roots are developed enough to remove humidity dome, although I am still running a humidifier. December 30, day 16, topped the Malasana cookies and removed growth at the first node. I am not mainlining as I don't think it would give me an even canopy across the 8sqft growing area this plant will take up. The topping won't give the same symmetry, but with a bit of training I will end up with an even, wide canopy. I removed the branches from the first node as I would have to end up removing a lot of that growth. In my experience those first branches never fill in as much anyways. December 31 day 17, recovery from topping going well. Put the humidity dome back on to keep the VPD at around .8kPa. January 2 day 19, despite the large pot causing a bit of overwatering leaf droop the Malasana cookies continues to recover well. I am done with the humidity dome after waffling back and forth quite a bit. I posted an image in more natural light to so that the leaves are a healthy green. Just that edge curling that will work itself out when the plant grows into its big container. January 4 day 21, growth is taking off as it should at this age. Its still going to be a long veg to get an 8sqft flowering size. Recovery from the topping is good, and new leaves are healthier with less clawing. I applied LST with plant ties to get growth to head toward my plant training frame (atlas plant trainer).

Těším se přátelé. Tento kmen jsem měl jednou venku a byla to chuťovka. 😁😁😁

What’s up, Growmies! Even though I find LST plants a bit odd-looking, the training has gone solidly so far. One plant is already ahead and has entered the flowering stage, while the other two are a few days behind. I’ve decided to stop LST on the plant that’s furthest along, and I’ll continue training the other two to help spread them out and even the canopy. Aside from that, plant health is looking good. They’re just a few days away from hitting the stretch phase, where I’ll let them do their thing. --- Quick rundown on everything else: Watering: 600ml every third day Fertilizer: According to the BioBizz schedule Light intensity: Around 600 PPFD VPD: Stable at 0.91 kPa Temperature: ~28°C Relative humidity: 75%

My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems.

Super Blüte große und gute aromatische (grande resa )

Everything on the readings seem well. Plant two seems to be having some kinda nutrition issue. I'm not sure what it is on the first set it leaves. Plant one is seeming to be super strong, healthy, and green. Gonna just keep watching the water levels and ph and keep on trucking.

Not a perfect round,but i hope that next round will be better... 🤟 I made a few mistakes about buying equipment and chose nutrition that does not suit me, but i will learns from my mistakes...

❤️🌱 We decided to document the flowering cycle of this monster for posterity.. she's been in veg for about 16 weeks, it shouldn't have taken this long but we dropped the table on her late in development so she needed a few weeks to repair..today is her very first day of flower... we're currently using x2 top end CMH 3100ks but placed an order last week for the FC-E6500 by MarsHydro to replace both 🤘🐱..that light and this plant should turn into something magical.. my hubby gets most the credit for this beast but we're a team so I'll share lmao 😸.. the scrog table is 3.5x3.5, homemade with 1/2 PVC, screws and twine..it's a tight squeeze in the 4x4 but looks great to me... thanks for dropping by and happy harvests everyone!! ❤️💡🌱

.

Even though it has only been 4 days since my last update, I want to upload whenever I do more then just water my plant. Something that being said since my last upload I did put more of a bend in the main stalk and defoliated alot of the up higher and down low branches trying to keep it all the same height.

Typical Green Crack harvest, lot of leaves but easy otherwise Lack of tent space really hurt her yield, guessing 25% less due to it Dry weight for Plenty 322 grams nice easy final trim rock hard nugs Two clones follow The clones nearly identical both weigh in at 710 grams wet in dry yield later Clones yielded 287 grams dry

3rd flower week complete. I cant help but think I've ruined one of the 2 girls. Shes taking a really long time to recover and bud growth is slow and steady. I've defoliated for about an hour and a half tonight and now really need to get some sleep! I'll pop back tomorrow with lots more photos and a more in depth update on what has changed this week. Update........ so ive been caring for the burnt up plant throughout the week. Shes not gotten any worse but just seems a little stressed now. I decided to remove the worst of the burnt and dried up leaves last night. I know it will also cause stress but I didn't want the rotting leaves to cause any bacteria growth around the healthy plants. They've been on everyday waterings at around 1.6 EC. I've included some Hygrowzyme in the last few feeds in the hope some beneficial enzymes may help the root zone take on nutrients. Despite one of the pair being unwell the other is healthy and vigorous. Shes not getting the attention she rightly deserves so I've included lots of photos to this weeks diary. I wouldn't want anyone to be put off from growing this strain as it has so much potential. I'm hoping that the healthy plant produces the goods and leaves me wanting more.

Destiny has given me a wonderful climate so far but from the 18th the weather will change completely, precisely in the last 10 days of flowering which fortunately is very accelerated by the anomalous heat, especially at night. Typical late summer weather here, kinda for weed. First storm is expected on Saturday, I'm ready to protect them. I've made the last rearrangement of the tent, trying to give more room to the vigorous and overflowing Pineapple Kush so I've rised the roof to 110". The plants are all carefully sprayed with thyme extract to control mites infection, it seems to work, infection is stable from 1 week. I kill manually 20/30 bedbugs a day. During nighttime, maybe a monster grasshopper, is munching some leaves, at this point I don't care, I have to defoliate anyway and these bastards don't chew buds, for now. Perfect filling, very frosty, enormous main bus is forming and a dozen of big & fat lateral colas are ripening. Pine resin/wet earth scent. Expected harvest time September 4th week but she's ripening fastly so maybe she can gnaw her sister Gorilla a few days. Last week with nutes Full dose Water Half dose Water Full dose Water Full dose Happy growing my friends🙏

DAY 23 Watered with 0.5L Prepared a new pot. 15L soil mix with 40% Biobizz Lightmix + 40% Tomato soil 🍅 + 10% perlite + 10% wormcastings moistened with 1ml/L Fishmix 🐟 💩 From now on every watering will be with about 5L. DAY 25 Potted in 15L fabric pot. Plant hole was dusted with Rootmax. 🍄 Watered thouroughly with 1ml/L fishmix, only 4L. 💧 Let's see if we can switch to 12/12 next week.. 😌 💚 Wishing you a great week! 😘 __________________________________________________ SET UP Mars Hydro LED TS1000 sponsored by @marshydrococo2 😘 https://www.mars-hydro.com/led-grow-lights/ts-1000-led-grow-light custom exhaust fan 270/320 m³/h 3x Garden High Pro fans 5W tap water EC 0,25 - adding Calmag (Plant Magic) to EC 0,4-0,6 - adding pH minus Bloom (AHH) to pH 6,5 biobizz Lightmix - later Plantaflor organic tomato soil 🍅

🗓️ Week 12: 2/12 - 2/18 📆 Week 2 of 12/12

Week 9 (11/05 - 17/05) D57: - D58: - D59: added 0.5 ml of Calmag, 1.5 ml of Bio-grow, 3 ml of Bio-bloom and 1ml of Top-Max to 1 liter of tap water @ pH 6.2 D60: - D61: added 0.5 ml of Calmag, 1.5 ml of Bio-grow, 3 ml of Bio-bloom and 1ml of Top-Max to 1 liter of tap water @ pH 6.4 D62: - D63: -