Recommended
Processing
Likes
15
Share
Hi... So this is my first time taking things a bit more seriously. Open for tips and advice. usually looking fore flavor rather than production. First week on 250w Also, pics are taken with the mobile... better pics next week
Likes
39
Share
@Zengrower
Follow
The plant experienced a noticeable stretch last week, and the branches are now quite close to the LEDs. While the buds aren't at risk of burning, I decided to supercrop the tallest branches to prevent them from blocking light to the lower ones. Additionally, I removed a lot of leaves to ensure adequate airflow and reduce the risk of bud rot in the coming weeks. To further enhance airflow, I installed an extra fan at the back of the Minigrow. The installation was straightforward: using a cable adapter, I connected both the existing fan and the new one to the fan controller. That's all for now—stay tuned for more photos and updates later this week! ✌️😊
Likes
142
Share
@Hologram
Follow
ACOP does not care about all those caterpillers and spiders (and other slimy mofos)... She is just getting some highlights in her hair(and a perm!) .. to get ready for the harvest party soon!!👊 happy growing for all ✊
Likes
11
Share
@tangie
Follow
I have started flushing with pH-adjusted Flawless Finish solution, expecting to harvest somewhere around the end of this week, although I will continue monitoring pistils and trichs. Upd: Added back 50% base nutrients and some flowering additives after researching some of the first responses to my flushing question. I learn every day. Even that which was scientifically proven true one day, might be even more scientifically proven absolutely false some time later (not related to flushing specifically). Thank you kings! Upd 2: Okay okay I cooked her with some cosmic rays or whatever those Chinese quantum bars emit — purple rays, I'll call it — that's on me. Turned them 30% down to see what's up. Light burn was not on my mind, because otherwise the leaves were not really curving that much, considering that this is 3 weeks overdue wrt advertised. Sorry about that, did not pay enough attention.
Likes
18
Share
Here we are day 55 for our Watermelon Candy F1 Hybrid. I would immediately like to say, do you notice anything by any chance? I said day 55 and we're pretty much ready. The leaves are turning yellow regularly, I have removed the fertilizers, the pistils are ripe, the resin is out, there are all the signs for a harvest which should take place towards the end of next week. The plants were born on April 6th, I repeat on April 6th for those who cannot grasp the concept. Most certainly Watermelon Candy and Wurlz will be harvested around June 6th, guys...8 weeks...not even 9 or at most nine weeks. If you're good at math, you do it otherwise I'll lend you some fingers. For topping lovers it means that if you want to do topping on autoflowering plants they won't finish in biblical times, according to my calculations even doing topping shouldn't go beyond three months, like an autoflowering from the previous generation. Why am I talking about the previous generation? Because these have certainly moved forward with speed, I have seen them grow and above all swell the flowers like I have never seen them do. As for the rest of the resin and pistils, everything is really in place. I want to do a terpene inspection soon and evaluate the ripeness for the harvest. Strong, fast, stable as promised by Zammi. https://www.zamnesia.io/en/10666-zamnesia-seeds-watermelon-candy-f1-automatic.html Feeding is by Plagron with the Power Buds - Sugar Royal - Green Sensation + Alga Bloom combo that drives me crazy https://plagron.com The lights are from Viparspectra p2000 and provide super light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA SEEDS - WATERMELON CANDY F1 HYBRID AUTOMATIC: BUDS BURSTING WITH FLAVOR If you've been looking for a flavorful strain with superb genetics that's effortless to cultivate, the hunt is over. Thanks to reliable F1 hybrid genetics, Watermelon Candy F1 Automatic showcases the highest degree of productivity and efficiency. This strain takes everything you know and love about the original, and packages it in a plant with even greater potential. GROWING WATERMELON CANDY F1 HYBRID AUTOMATIC Derived from Watermelon, Candy Kush, and ruderalis, Watermelon Candy F1 Automatic is a finely tuned medley of genetics. This cultivar is fast to flourish and reliable to grow, no matter where you choose to grow. Taking just 9–10 weeks from germination to harvest, she provides a uniform growing experience culminating in a huge haul of buds for her size. Reaching heights of 65–80cm, Watermelon Candy F1 Automatic stays pretty grounded, making her perfect for smaller growing areas where space is a commodity. It also means you can fit more plants in if you have the room! Once ready to yield, growers will see a return of 400–450g/m² indoors and up to 100g/plant outdoors. Moreover, Watermelon Candy F1 Automatic is highly resistant to pests and disease, making it an ideal strain for newcomers and fans of low-maintenance cultivation. AROMAS, FLAVORS, AND EFFECTS OF WATERMELON CANDY F1 HYBRID AUTOMATIC If we haven't already sold you on the power of F1 hybrid genetics, the proof is in the pudding. Watermelon Candy F1 Automatic is teaming with terpenes and cannabinoids, making for a lively high coupled with huge flavors. Just one hit is all it takes to sample rich fruitiness mixed with sweet candies and a slight earthiness to back it up. And with an average THC content of 23%, the effects are euphoric at the start but settle into deep relaxation soon after. Whether you're chilling alone or with friends, Watermelon Candy F1 Automatic will see you right. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io
Likes
58
Share
Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.thegratefulseeds.com/shop/feminized-seeds/limited-edition/blue-javaz/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
72
Share
@Roberts
Follow
Auto Maxi Gom is starting to get into bulking. She has been growing good. I also lollipopped the canopy today. Shi is making good progress although she is behind schedule for a autoflower. Nothing else to report at the moment. Thank you Medic Grow, Xpert Nutrients, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
2
Share
Hey good morning Growers hope all is well with everyone and their family and plants Well there’s a lot going on over here at the 48219 Krud Buddy’s Grow House I found out when I transplanted my Wedding cake and Sherbertlato I put them into super soil I feed them twice lightly thank god cause I don’t have any burns or anything n their growing good to me everything is growing good to me way better than the auto flowers I started with but I did some cloning of my own and I’m loving how their taking on as well So here’s what’s going on strain by strain Gorilla Cookies & Peanutbutter Breath : as of Today April 25th they are on day 60 since I got them and have been sitting in the dark since last night for their 24hrs of darkness before flip to flower starting tomorrow morning thinking a good timing would b from 6/6 or 7/7 also I have them under my 600w budget led hanging 12’ above I can’t wait to see how they out and I have them under an scrog net I made Wedding Cake & Peanutbutter Breath: on May 5th it’ll be 60 days since I’ve had them I pretty much told everything bout them at the beginning Grape Pie & Girl Scout Cookies: it’s Been about 3 weeks And I must say they stretched fast their already 15’ tall the grape Pie is spreading faster any of the other clones I got I’m loving it I recently got Cherry Pie & Guava Cake x Cookie it’s bout week one going on two weeks and I must say when I got them I was kinda skeptical about them because they were so weak looking and the cuts on them were terrible but they look like they might turn out into something amazing idk but the pictures show it all as well as the clones I cut myself in clear plastic cups ands their on their second week of life I noticed roots on the 10th and put into cups on the 11th if I’m not mistaken I’m not around my chart so I’m not for sure but everything is going swell over here to me
Likes
20
Share
@4F1M6
Follow
I started germination of 2 Amnesiac Automatic beans on 01/01/2021. HAPPY NEWYEAR! I am germinating them using rockwool cubes and a humidity dome. I pre moistened my plugs with ph balanced water to 6.4 . Than enlarged the pre made holes using a wooden dowel. Than sowed my 2 beans into the holes. I then ripped a small piece of rockwool off each plug and mulched it up. Than lightly filled in the holes using the mulched rockwool. Than it was into the humidity dome to marinate, and complete the germination process. Will likely take roughly 4 days to get some sprouts. Starting my adventure with Spliff Seeds Amnesiac Automatic. After they emerge I will get the plugs planted into 5 gallon pots to rock and roll. Cant fucking wait! Some background information on my experience with Amnesiac auto. I grew 2 of these ladies in one run. This variety stayed in veg for 6 weeks before it made the transition to flower. Produced 2 super branchy plants resulting in a mighty full canopy. Obviously resulting in quite a large yeild. Buds were relatively dense but super chunky! Fat colas were in an abundance. Plants were great height roughly 3 feet, and Not super stretchy. Strain responded well to lst and had no stunting as a result of light bending and manipulation. Very easy going in the nutrient department. Had no trouble at all meeting their dietary needs. Buds were very resinous and unleashed quite a euphoria! I was VERY impressed with the first run. So let's see how the second run goes.
Likes
2
Share
Flipping now, light training trying to maximize horizontal space
Likes
14
Share
@wolvex
Follow
Because I'm little worried about the size of the flowers and their resin, I started adding green sensation of plagron, lets see what can do. As you can see I'm waiting to the last moment to watering, in order to stress a little bit my plants and get more resin.
Likes
10
Share
@coriander
Follow
Pretty simple first week! Seed took 3 nights for the taproot to pop and it was planted in its final pot on day 4. On day 6, it finally popped through the soil and on day 7 the little sprout is starting to grow up. There is a small piece of seed casing left attached. Going to leave it for a day or two. If it doesn't fall off, I'll do it myself. Thanks for stopping by! 🥦
Processing
Likes
26
Share
Everything is going well The big blackberry is in livingsoil so water & urb only Blackberry #2 is growing strong Smoothie looks great too
Likes
2
Share
New growth is fast soon I will put into a 20 litre pot and give her more space to spread out.
Likes
24
Share
Es una genética maravillosa sin duda la volveré a plantar otra vez es muy muy resistente tiene muy buen olor y unos tricoma de locos