July 15 - Temp(High/Low) 27/15 Rain(mm) 0.0 July 16 - Temp(High/Low) 26/17 Rain(mm) 0.0 July 17 - Temp(High/Low) 25/14 Rain(mm) 3.6 July 18 - Temp(High/Low) 26/19 Rain(mm) 9.5 July 19 - Temp(High/Low) 30/20 Rain(mm) 0.3 July 20 - Temp(High/Low) 25/17 Rain(mm)13.6 July 21 - Temp(High/Low) 23/17 Rain(mm) 0.0 This week was wet and hot and muggy. Got some nice growth going on. She survived the thunderstorms that blew through.

Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D57/F18 - 19/10/23 🛠️ EC 1.2 (stable) pH 6.0 (rising) --> EC 1.1 pH 6.3 🌊 Added water and nutes (B52, Big Bud and Bud Candy, only little bit of Bloom A and B) 💼 Little defolation and some adjustment on the little one. As I saw some light stress symptom I changed the light schedule to 12-12 but with red lights always on. 🧠 I can't wait to see the buds of Little Marlene reaching out Big Marlene 🚀 Little Marlene is now quickly blooming. Some light burn symptoms on little Marlene ________________________________ 📅 D58/F19 - 20/10/23 🛠️ EC 1.2 (stable) pH 5.7 (falling) 🌊 No water neighter nutes added 💼 Sprayed Spinosad 🧠 🚀 ________________________________ 📅 D59/F20 - 21/10/23 🛠️ EC 1.4 (rising) pH 5.4 (falling) --> EC 1.2 pH 5.5 🌊 Added 5L water, nutes Bloom A - B and calmag 💼 🧠 🚀Little Marlene leaves are wilting down ________________________________ 📅 D60/F21 - 22/10/23 🛠️ EC 1.3 (rising) pH 5.3 (falling) --> EC 1.2 pH 5.4 🌊 Added 2L water and nutes: Calmag, Bud Candy, Big Buds 💼 Made a big defolation and sprayed Spinosad. 🧠 I really hope Spinosad will solve the situation here. 🚀 _____________________________ 📅 D61/F22 - 23/10/23 🛠️ EC 1.3 (rising) pH 5.5 (stable) --> EC 1.2 pH 5.5 🌊 Added 4L water and nutes: Calmag, Rhino Skin, Bloom A, B 💼 Little defolation on the big one. 🧠 Never again two girls germinated in a such big time difference (3 weeks) 🚀 _____________________________ 📅 D62/F23 - 24/10/23 🛠️ @17.00 EC 1.3 (rising) pH 5.1 (falling) @23.30 EC 1.4 (rising) pH 5.2 (stable) --> EC 1.2 pH 5.2 🌊 Added 2 L of water, calmag, big bud and B52 💼 Little defolation on the big one. 🧠 🚀 _____________________________ 📅 D63/F24 - 25/10/23 🛠️ EC 1.3 (rising) pH 4.7 (falling) --> (by setup) --> EC 1.2 pH 5.5 . Check in the night EC: 1.13 (stable) pH 6.2 (rising) 🌊 RES Changed 💦💦💦 -> Added calmag, Bloom A-B, Bud Candy, Big Bud and B52 💼 🧠 Quite strange, but good, pH goes up in that way 🚀

So Day 16 F i had to let go 2 of my girls, they turn out hermafrodite and i don't want to rist my crop, the whether is to freaking Hot and i have no A.C. so 2 of the Kush Clones are out, leving me with one Kush, one white Mango, one Poyote Gorila, 2 Blue Berry and seven Super Gluees. They all look preety good and they keep streetching every day as they should :) Lets see were they stop. Stay safe Peace out D

Went from 450w to 150w blue for a week due to heat and too much height gain. Weather got cold so I put the 450w red back in as they seem to be thickening up. Feminising was very easy on the ones I chose, I chose only three that had thicker faster flowering and more THC but will cross with the more sativa dominant ones.

Performed some light lst and topped all plants, then feed some recharge. They bounced back pretty fast they didn’t show no signs of stress so that’s a good thing. I’m give them one more week in the 1 gallons and then transplant to 3 gallon Keep up this grow is epic

another very sunny week. with temperatures up to 38 degrees. she coped very well. the buds are getting thicker and thicker and it smells very good. not too strong, very pleasant. she is also coping very well with the fertiliser. she has also been given power buds from plagron

Starting to see almost all Milky trichomes. Buds are pretty dense. Smell is strong and loud. Smells like lemon sweet kushy

¡Día 21 de floración y decidí darle más luz al escenario verde de Tropicanna Poison! 🌿☀️ Realicé una poda estratégica de las hojas más grandes, permitiendo que esos cogollos en ascenso reciban toda la atención lumínica que merecen. 💡🌺 La planta está respondiendo con energía extra y los resultados prometen ser tan brillantes como el sol que ahora llega a cada rincón. 🚀✂️ ¡Una poda para un espectáculo floral más brillante! 💚🌈 #TropicannaPoisonUpdate #PodaCannábica #FloraciónRadiante

Sponsored grow 👉WeedSeedsExpress👈 Week 14 flower 10 Love Potion is in her last week. I am watering with ph 6.5 water with no nutrients and I have lowered the lights to 20%. I plan on putting her in the dark on Thursday for chopping on Saturday. Trichomes remain mostly milky. I saw a few ambers in 1 pic taken on 4/6. Last peek pictures on 4/11. Your likes and comments are appreciated. Thanks for stopping by. Thank you @WeedSeedsExpress for this opportunity to grow your strains. Growers love 💚🌿 💫Natrona💫

•Big bud 100 days from seed start flower 3/14 •Agent Orange 116 from clone Start flower 3/14 •I was going to do a lemon G 12/12 from seed but will be doing that in her own journal

Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.

Ich bin immer noch in der Ernte, kann also noch keine Angabe zum Gewicht machen. Nass wird nicht gewogen. Zu Ernten hab ich angefangen die oberen Türme abzuschneiden, dann die dicken Buds, anschließend alles etwas begradigt und jetzt bin ich gerade dabei einzelne Schichten von etwa 10-20cm Dicke abzutragen, so können die unteren "Popcornbuds" noch auswachsen und abreifen. Sozusagen ein Multi-Monstercrop oder so ähnlich 😂 Vorgestern hab ich einen Tag lang mal die Chemdawg getrimmt, da die dicken Türme dringend geerntet werden mussten. Heute war dann die OG wieder dran. Einen roten Eimer zu trimmen dauert etwa 1,5 - 2 Stunden 😆 Den Verlauf des Monstercrops werde ich dann hier weiter dokumentieren. ----------------------------- Heute wasche ich die erste Ladung Schnittreste. Mit der Waschmaschine arbeite ich das erste mal, also muss ich noch üben. Ich erwarte also noch kein Top Ergebnis, würde mich aber trotzdem drüber freuen. Drückt mir die Daumen 😅 👍

This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!

*topped all the plants. *one of the phenols looks small and desorted let’s see how that one comes out. *increased PPM To 550 from 450. Ph seems to be good.

My Soaptini plant is looking amazing! The leaves are a really vibrant green, and they have this cool, almost waxy texture that makes them look super healthy. It's growing nice and bushy, and I'm loving the overall shape. This one's definitely a showstopper, and I can't wait to see how it blooms. Stay tuned for more updates on this beauty! The weather has been absolutely gorgeous this past week! We've been hitting that sweet spot of 70 degrees during the day, perfect for getting outside and soaking up some sun. Then, it cools down to a comfy 50 degrees at night, which is ideal for sleeping with the windows open. I've been loving all the fresh air! I finally got around to building that little wooden planter for my windowsill. It was a fun project, and now my regular plants have a nice new home. It really brightens up the room, and I'm thinking of adding some herbs to it soon. Maybe I'll even try growing some basil!

Been a great week, not much to say on the dynomyco as it's early stages but im sure to see major improvement over the next week! I will say at this early stage though I do have alot of stable new growth so shows something is working in them roots but as for my females now, wow it's already shown it's work there as I used it on transfer and mixed Into the medium of the rear females so I'm impressed being a first time user! I will say i have learned alot about it following ari and the firebudz team on Instagram, so if anyone needs any pointers check them out they run classes too! Next one is Wednesday at 5pm PST very very educational growmies! Peace and love and stay tuned for greatness 💪🏽💯👊🏽💚