Top canopy was uneven so supercropped a couple of branches. Top branches are flowering ok but I'm not sure she'll make it too the end, bottom branches looking great. I asked how I can speed up flowering, and I need too cover her for 16 hours a day, can't cover with boxes as rain will destroy the cartoon, don't have a cloth big enough. I'm just gonna wing it, adding some leaves to protect soil from frost, bringing her in when it is forecast to below 6. She'll be flowering until Christmas at this rate :D keeping an eye for hermie

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 21/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed almost no run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). Did some light pruning also.

Bring on the flip! They all look good and healthy.

Day 49 Flip day! Just flipped them to 12/12 took loads of leaves off. Let's see if I've guessed the sex right then 😏 I think I've got 3 fems but people still tell me I want know until I've flipped 🤷‍♂️🏼 Update: Day 50 and day 1 of flower looking very happy will give a nice feed when soil dries out. Lights are now maxed out and on Day 51, day 2 of flower I'm sure all 3 are definitely fems will keep eye on them next few days 👀 Update again: Day 53, Day 4 of flower and they looking beautiful 😍

Día 57 (10/03) Riego con 400 ml H2O EC 0,45 Día 58 (11/03) Los cogollos no paran de engordar y ponerse duros como rocas 😍💥 Riego con 500 ml H2O EC 0,45 Día 59 (12/03) Se muestra llena de tricomas! Espectacular! Riego con 500 ml H2O EC 0,45 Día 60 (13/03) Riego con 500 ml H2O EC 0,45 Inicio un experimento a ver cuantos días aguantan sin regar habiendo regado dos días seguidos con 500 ml, ya que voy a estar 3 días fuera la semana próxima.... Día 61 (14/03) No riego Día 62 (15/03) A las 48 horas las macetas empiezan a estar ligeras, aunque no secas, pero NO van a aguantar 3 días sin riego Riego con 350 ml H2O EC 0,45 Día 63 (16/03) Aplicación de 0,5 Litros de PK Booster Compost Tea de nuestros increíbles amigos de BIOTABS 🚀 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

Week 3F begins. Raised the light a bit, will see if it makes a difference with the leaves. Bud sites are popping and looking good for their small size. Thanks for stopping by.

Everything looks really great. Flower has reallt taken hold here at the end of week 5. Ive started my flower hardener (mendocino avalanche) and they really have perked up. Im getting much slower dry out than i woukd like, next time more perlite in my bottom layer for sure. These larger pots (7.5 gallon) really take some dialing in but the plants love them for sure. I habe 6 inches of roots coming out of the bottom of all of them. Ill try to get a picture.

What up grow fam. These 3 finally got the chop. Wow do they smell pungent. The flowers came out nice, not to dense but neither airy. The wet weight for these came out to 912g. To say they're coated in frost is an understatement looking like a winter wonderland.

week 3 is a tough rn not gonna lie shes yellowing extremely fast and shes begging me for potassium. i was just giving her 2 tsps to 3 gallons of water. as of today (jan 8 2022) i gave her a feed of 1 and 1/4 bloom and 1/4 veg nutes to try to fight the yellowing. i honestly dont know if that was the right thing to do most threads i read just said to add some nitrogen but idk if dyna gros bloom and grow are meant to be mixed. especially this late in flower. either way its too late i already gave it to her i guess now all i can do is wait and see what happens. you can see how fast the yellowing is happening too.

So far so good, Smell is getting very intense at the moment. Started flushing today. Really can't wait to hang these upside down 🙏😇 For now they are barely "hanging" in there, they are getting heavy AF haha. leaning on the sides... Hang in there ladies!

Growing great. Drinking a gallon every 2 to 3 days. Posted a bunch from through the week. shes starting to fill in the empty spaces in little nugs and ive never got to watch this day by day before so im having a great time right now its off though that she still doesnt smell like much when you put your nose to her but when you touch some the leaves or touch the bud itself it smells pretty dank on your fingers Wondering if it will get louder as she finishes up

10/23: I fed today with One, sweet & sticky, signal, beastie bloomz, silica, and a little Ca/Mg 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangaroots, and humic acid. Lowered the lights to no more than a foot from any cola..most are 7-9" away.

Shes on the last strech ..suppose to be 55 days dat would give her around 10 more days ..the buds are getting significantly bigger and bigger every day but will see wat the trichomes says might go longer then 55 days of flower

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Well I think I got a little burn don’t know what exactly but I think I had my 1000w light to close I get the heat emitting had something to do with it . I adjusted it 40cm from grow

Around 11-12 weeks seed to harvest,, only had a few plants the largest yielded 72 grams the smallest around an ounce,,, just a few plants for personal medicinal use grown 100% naturally in the great british outdoors 😎

tried rapid 8 times nutrient tea and she act just fine