Likes
Comments
Share
The buds fattened up to about the size of my fist. Sticky resin coated everything and the tent smelled fantastic.
Likes
21
Share
Been feeding just water ready for the chop. Some of them have all brown pistils and have pretty much stopped all together. The kalimist indica pheno is still flowering so I'll let it go until it looks ripe 👍
Likes
10
Share
@Blazeman
Follow
Auto looks done. Pakistan Valleys look almost done. Candy may need another couple weeks. What do u think i should do guys? Should i wait and harvest all together? Or harvest the auto now, then the kush and lastly the Candy? What's the best way. Also i had been planning to dry them all in my tent. If I do a staggered harvest, i have to build a box or empty out a closet to try and dry them in 😫
Processing
Likes
10
Share
Well I'm a bit upset last week I ended up dropping my ph meter in a tank of nutes I was mixing and by the time I got it out the meter was junk. I was planning on flushing the crystal but had to wait another week for the meter. I suppose the good thing to take from this was I found out why I was having issues with my plants. When the new ph meter came in I went to check my run off and my nutes that I had all ready mixed up. It turns out that my meter i had been using this whole grow was off by about -2-2.5 so this whole time I had been feeding the plants at around 3ph smfh. I cant believe they look how they do knowing what went on this whole time. Fastbuds crystal meth is 3days into flush and i will be cutting it down this weekend most likely. Mephisto hubbabubbasmelloscope is smelling like sweet sweet candy and is thick in resin Bighead seeds freeze berry/ blueberry crumble has a dank pungent stank to it and also is frosty but larrfy Big bomb is still growing thick and have bud sites everywhere Now I'm ready for the next batch and ready to get dialed in!
Likes
34
Share
That’s her finally cut. Once dry I’ll get a final weight and some bud porn! Some beautiful colours!
Likes
11
Share
Hallo zusammen 🤙 Das war es wir sehen uns in 2 Wochen mit dem Erntebericht. Sie bekommen 20 % Rabatt bei Zamnesia und der Code lautet GROWITGD.
Likes
27
Share
@Roberts
Follow
Things are going great. Took well to the training. Time to watch them grow, trim a leaf here or there if needed. Thanks anyone whole likes and follows.
Likes
93
Share
Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens We meet again to admire the growth of these wonderful autoflowers Holy God....My central zkillez has something supernatural! Looks like you eat kryptonite for breakfast 😉Something tells me we're going to win 🏆
Likes
5
Share
Black Mamba is doing great, growing wide. It's got healthy color of leaf and the leaves aren't curling in the heat. I'm think to make it one last top at this week. Then in a few days transitioning it to 12/12
Likes
3
Share
This one is for breeding i will cross her with skunk.
Likes
60
Share
@Clutch
Follow
Hello again. Welcome to Week 6 or 7 😊 Buds are riping and starting to give a good smell. Minor problems with some caterpillars but the plant didn't take lot of damage, I guess I was lucky too spot it soon enough. Temperatures are far from ideal but she looks like she can handle it. It's kinda like 22° Celsius in a normal room. Barely sunlight and for fresh air she stands at an open door. No idea about the air humidity but It rains a lot outside😂 no chances on mold this way. With al the things I did wrong I'm pretty sure this is a very resistant strain. Some yellowing fan leaves but totally normal in this stage. It is what it is, I will be happy if I have something good to smoke from her. 2L water with 7ml Alga Bloom and 2ml Green Sensation was given. The soil was pretty dry and only a little bit of water went out on the bottom. Thinking this will be one of the last waterings with nutrients. Wanna be sure too flush soon enough since my Orange Bud last year only had one week of flushing. Any thoughts on that subject? Give me some advice. Happy growing friends 😉
Likes
10
Share
APRICOT GORILLA AUTO / GANJA FARMER WEEK #11 OVERALL WEEK #5 FLOWER This week she's looking healthy and vibrant no issues to report. She's starting to stack her buds she got nice almost round buds with good trichome coverage to them. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you GANJA FARMER!!! APRICOT GORILLA AUTO / GANJA FARMER
Likes
3
Share
- Raised cal mag from 3 to 5 because I thought plant was lacking cal mag - Upped nutes but it may have led to nute burn in the next few weeks (see pics) - ~350-400 ppm for half nutes - buds starting to form nicely
Likes
7
Share
@Akapibara
Follow
Day 15 - She went for few days outside (not for night of course!) she'll get some fresh air and a lot of sun! Day 16 - She's good now i think. Day 18 - She grow like crazy now! Day 20 - Her next stage of leaves is incoming i think
Likes
35
Share
@nonick123
Follow
Día 37 (08/07) Ajustes de LST en todas las plantas! 🚀 Día 38 (09/07) Ajustes de LST en todas las plantas. Las ramas inferiores están creciendo como un cohete! 🚀😍 Riego con 250 ml H2O pH 6,5 Día 39 (10/07) Las plantas se muestran sedientas! Creo que el cepellón está lleno de raíces y piden el trasplante! El crecimiento no se ha visto afectado de momento Riego con 500 ml H20 pH 6,5 Día 40 (11/07) Paso a regar con 500 ml / día, ya que hace mucho calor (30 ºC) y efectivamente las plantas ya han copado la maceta de raíces OnionOG y KS1: Las ramas de nodo inferior se han quedado enanas tras el entrenamiento, de modo que las elimino y aplico canela en polvo en los cortes Riego con 500 ml H20 pH 6,5 Día 41 (12/07) Riego con 500 ml H20 pH 6,5 Clones! Mi experimento vuelve a demostrar que NO necesitas complejos productos de clonación ni sistemas para obtener clones! Hace 15 días puse 2 clones con el tallo sumergido en miel durante 5 minutos en una maceta de 400 ml con PRO-MIX HP BACILLUS + MYCORRHIZAE He mantenido la humedad alta con una cúpula de humedad casera hecha con una botella de agua PET de 5 litros cortada por la mitad y pulverizando a diario. Han estado los 15 días en mi terraza con luz indirecta, y temperaturas que rondan los 30 - 32ºC durante las horas centrales del día Hoy los he trasplantado a una maceta de 1 litro porque ya habían formado raíces y empezaban a formar nuevas hojas! 🐥🐥🚀🐥🐥 Día 42 (13/07) Riego con 500 ml H20 pH 6,5 Día 43 (14/07) Trasplante a maceta definitiva de 21 litros de ROOTPLUS Pot de GSKOREA GLOBAL! Estas macetas son una maravilla! Proceso de trasplante: Se prepara con 17,85 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1,05 Litros de Humus de Lombriz (5%) + 2,01 Litros de Insect Frass (10%) + 210 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 6,5L para que quede la forma perfecta de la maceta donde están actualmente Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la planta de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Una vez asentada, complemento con un riego de 500 ml con 25 ml/L de Humus de Lombriz Liquido Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0.25 ml/l Realizo ajustes de LST aprovechando el trasplante a la nueva maceta. De momento tienen una canopia muy bien formada! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
4
Share
Plant packing on the weight, trichomes starting to form. Some fan leaves have dried up and fallen off, bringing new light to the bud sites! Little splash of big bud added, to try keep the weight on.
Likes
4
Share
Hey hey Growmies! Smooth sailing for this little Samsquanch OG, in the begnning of the week I 3D printed a Hydro Halo to keep this girl moist as she sends out roots. A couple of days later, roots had shot out of every direction so I removed the halo and started LST and leaf tucking. This is where we start seeing growth! my first Mephisto Auto, Im excited That's it for now Growmies, I hope you'll follow along with these great artisinal genetics! Stay safe and keep Growing. I'm still looking for decent Black Diamond OG seeds, or something very close to it genetically, I'm also looking to add a second tent/light to my grow space, if you can score me a great deal or sponsorship, hit me up.