Likes
Comments
Share
@Rangaku
Follow
Little slow out the gate but we’re getting back into the swing of things with some good growth the last few days . I’m running a coolmist humidifier to keep these babies fresh under the HPS during lights on and a heat mat under the pot in off cycle with a folliar spray to go to bed with .
Likes
223
Share
Sweet Seeds Gorilla Girl F1 Harvest on Day 80 After Round About 7 Weeks Flower . Amazing Strain with beatiful Dense long Buds . The Smell is Amazing Zypresse Type. The Smoke is Smooth . Couring some for the upcoming Summer . Drying time : 8 days ~55% 20°
Likes
14
Share
@karchutos
Follow
Buenas a todos! La planta es una bestia! crece muy rápida y con mucha fuerza, estoy muy sorprendido. Gran genética y buen feno, un lujo...
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
@pzwags420
Follow
The start of week 9 is going well. On day 5 and 6 of week 9 the temperatures outdoors we're in the 90s my extractor fan ran continuously and my grow room temps are hitting 83 to 85 warmer than I would like. It is day 7 of week 9 and the plants did well on vacation the 10 gal reservoir lasted with an extra 2-3 gal left when I returned. I did however notice a Nitrogen deficiency on the foliage(yellowing on lower parts of plant). I believe this is due to to the long time in between feedings. I applied my weekly Nutes. I will watch for improvement in the Nitrogen deficiency.
Likes
14
Share
@DrJoint
Follow
I have only one seed left and I decided to clone my GSC :) Let’s see how it goes :) her mother is in flower room at the moment. 🌲🍀🌱🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦🥦
Likes
9
Share
Update of Goofiez 2 !! It’s incredible this strain is so strong and fast grow !! Stay tu ed
Processing
Likes
2
Share
@Cocosium
Follow
Started overdrive this week. Should definitely see an increase in bud size now. Some trichromes are already cloudy. I’m planning to give these another 2 weeks and more if need to get the balance of 50/50 amber/cloudy
Likes
7
Share
Hello let's call this first week of flower, she started to smell a little bit, also startet stretching, very strong plant! Have some Phosphorus deficiency (curled discolored leaves, yellow leaf tips) so i'm feeding half dose of Big Buds from Advanced Nutrients (NPK 0,1,3), let's see how she reacts. Day 30 TRYING TO FIX PROBLEMS BEFORE IT'S TOO LATE: Magnesium deficiency - yellowing between leaf veins. Phosphorus deficiency - curled leaves, yellow leave tips( nutrient deficiency overall) slow growth. Calcium deficiency - small rusted dots on the middle aged leaves. Ph was kinda high 7.1 Fix the problem: I've added 1.5ml/l Calmag 0.1.3 NPK 1ml/l Big buds which will give plant its nuteients. And water PH 5.5 to lower overall soil PH. I think she will bounce back in a few days! Day 34 and we are back on the track! She's been recovering and stretching very well, soil PH is 6.6 for now Day 35 end of frist week of flower, 10cm stretch in 7 days.
Likes
82
Share
@Fatnastyz
Follow
4-5 Harvested finally, well finally for me. 😂 Big ol, stinky and sticky buds. Density is not an issue! 💪😂 Loved this grow! Went really smooth, with me freaking out occasionally 😂 No over/under water and no over feed! FINALLY!!! Wow met lots of new and great people this grow! You people in this community rock! 💚 Now enough of the mushy stuff. Guy says once dried, we should have right around 3 ounces. Lets see how good his guesstimate is. 🙏🙏💪😁😻🤘
Likes
16
Share
@BB_UK
Follow
Greeeeeat week! Dynomyco has truly helped this Girly to get off to an amazing start and gave her the force to gain thick stems and more branches! It could also be the addition of Co2 in the grow area! I also give her a diluted foliar feed of formulex as she goes through the day as I have a very low humidity for that week but I can bring it up now as I don’t need it so low in my home! (Was drying other plants)
Likes
25
Share
@MaxMo8
Follow
I admire this plant, wonderful and calm growing
Likes
29
Share
@nonick123
Follow
Día 55 (17/06) Riego con 750 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Está empezando la senescencia y a solicitar menos agua. Creo que cosecharé en el día 63 Día 56 (18/06) Riego con 750 Litro H2O + Regulator 0,15 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 57 (19/06) Riego 750 ml sólo H2O - pH 6,2 Empiezo a regar solo agua en vista de la cosecha del día 63 Tiene un aspecto espectacular, con los cogollos gruesos, duros como rocas, y con matices morados por todas partes 😍💥 Día 58 (20/06) Riego 750 ml sólo H2O - pH 6,2 Día 59 (21/06) Riego 750 ml sólo H2O - pH 6,2 Tras la revisión con el microscopio (60x) se confirma que LLCCA estará en los 63 días 😍💥💨😁 Día 60 (22/06) Riego 750 ml sólo H2O - pH 6,2 Día 61 (23/06) Riego 750 ml sólo H2O - pH 6,2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
10
Share
@Chubbs
Follow
Weekly update for these girls. They got a defoliated and lollipopped this week. Also went full on into preflower showing pistols and flower sites everywhere. Over all they're growing like champs. Happy Growing
Likes
Comments
Share
@Ninjabuds
Follow
I wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smile
Likes
36
Share
7/19: Started new nutrients today. Filled gallon jug with new nutes. Poured half of new nute mix in half gallon jug. Poured the entire half gallon jug into reservoir. 7/20: Bumped light intensity to 50% 7/21: Filled reservoir to the 2nd line today. Added a total of 1 gallon to res to get it to that line. Poured the rest of the mixed nutes for this week (half gallon) and then another half gallon of just plain water. 7/24: Bumped light intensity to 55% 7/25: Sadness today 😞.. While in the process of doing more LST today I accidentally snapped the main stem. I Panicked! Moved plant back in opposite direction to counteract the split. Will be monitoring very closely! 🙏🏾 ***** For this Grow****** “Day Air Temperature” will be the max temp of tent for the week. “Substrate Temperature” will be the average temp of tent for the week. “Night Air Temperature” will be the lowest temp of the tent for the week.
Likes
30
Share
Another week in the books. They are getting close to harvest and I switched them to plain pH adjusted water. Another 1-2 weeks.
Likes
13
Share
Royal AK: Buds are still somehow small, but I see their promise. Hopefully, they will get more forsty after I cut the quick one and move the light further. Quick one: Buds are maturing quickly. I started flushing already on day 50