Again plants are growing very quickly and all I am taking care of is the microbes and the water. Raised rootball temps to 24c plants are liking it.

Algae is an asshole. Thought things were going really well... and then found a bit of algae in the rockwool.... No biggie I figure. Wrong. Left it one night, and today (Sunday) open the jar to find algae in all the roots. Not cool. Well, I needed to swap the nutrients anyway, and was going to do a major bonsai pruning... so why not also wash everything, plant included, in mild hydrogen peroxide solution? Sure, THAT's fun. Made the decision to swap Hydroguard for H2O2 as well, since the water is room temp (21-22 C) and the H2O2 supposedly helps prevent algae.... and keeps away root rot even in higher solution temperatures. Oh, and H2O2 is also seemingly a buffer... making getting the pH right in that small jar strange - needed WAY more pH down than without the hydrogen peroxide. Fingers crossed that the major life disturbances will help manage the algae and not just put the nails in the coffin.

16/11/21: The plants are growing as they should have adjusted to light to 80% brightness and are at a height of 22 inches for next week. they were rolling at 18 inch height and 70& brightness for this week. defoliated some of the more dead and smaller leaves at the base of the plants. topped all of the plants which will affect height but will hopefully bring a greater yield. plants are doing well - around 18 inch in height on avergage with the bottom far left coming in at 24 inches alone.

Hey! This time the start turned out to be successful, which I am very pleased with. In this cycle I will have two plants - CBD Crack in the neighborhood, I already had a report on this strain, so this time all the attention is on Hulk 💪😍 By the end of the week, I planted mycorrhiza, this time of our Ukrainian production, and will look at the result. Glory to Ukraine! 🇺🇦 Stay connected and take care of yourself! 🙏

like my previous experience, easy plant, the Fast Eddy grows almost alone, a real pleasure. a little disappointed by the wet harvested weight, but nice big nuggets. let's go for the dry

Hi everyone I chop her down day 86 and let her dry in 19° temp and RH 65 % I'm going to slow drying for best results 7 to 8 days She is very dense and sticky bud and so heavy too I think she yield over 150g plus but the bud are not 100% purple its mix with light purple and green ass you can see in pic or video but still I'm very very happy and already germinate another purple lemonade 💜 next week I will update smoke reviews and final dry weight 😀

Day 71. Took down old leaves, she smells FANTASTIC and is sticky, will be strong ! Mars TS1000 did great job ! This girl coped without food best, but fading too. Sometimes i regret, that no nutes were used, maybe taste will pay out the sorrow ;))) Day 76. She fills the room with sweetness !!! Still would need 3-4 weeks, but i go for month holidays in 4, so i chop her on events last day - Aprils 30. Day 77. She is getting there, i see some weak colours, smell is very nice, even old leaves makes fingers sticky, gets weak violet tone and is on highway to chop land ;))) Happy Growing !!!

Giorno 4 annaffiata con 2L di acqua

Jan-9-2025 So I decided to harvest lemon cherry cookies,Ztrawberriez,and Cherry cola.The Papaya cookies,Strawberry pie,and Pound cake are still going strong as they need some more time maybe another week or two before they are ready.

This thing was very easy to grow. Liked low PPMs in flower. Around 600 was plenty for her. Will report taste and effects when curing is complete.

14/08/2023 Nothing special to mention at the beginning of this week, except my new heat/humidity detector, which is actually an old device I found. I came across it because my little one doesn't seem very reliable anymore(As you can see on a picture it say 69% while the other big one say 45%). Still no nutriments, just water with pH-. And I think I won't make any more changes until the final weeks, when I'll probably trim a maximum of leaves. 17/08/2023 I redid the LST for number 3, without knowing what I was doing, and I'm not sure if I did it right, but I'm pretty happy with the result. The canopy of #3 looks really good, even though the overall canopy is quite uneven. However, doing the LST on all 4 plants intimidated me way too much. So I changed the position of each plant so that they wouldn't encroach too much on each other; I only have a space of 60cmx60cm.

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

Almost week 10 This grow went by soo fast. I watered with molasses and the kelp4less extreme blend ph to 5.6 range. digital meter says 6.1 but my fluid tester is orange with slight tint of yellow. ppm going in are low and is pulling out about 700ppm of salts. highest its ever been for this stage . but from what it started out as I got it to normal ranges with out plant freaking out. added a video and a few pics of the veg side. I got new tsw2000 light in as a backup the new design is soooo much better then ones i bought. I also got my order in from seedsman og kush , peyote wifi cbd , strawberry grape banana , and white widow regular. Can hardly wait to start the breeding! So far the mite sighting looks to be a one off fluke as no others have been spotted.

Started with lowstresstraining

Moved to final 20l pot on day 8, great growth sonce then. No nutrients just phd water.

Some deficiencies or burn in bottom leaves but show goes on.Bout to hit the Jumanji weeks of upward growth letzgetit

Week 10 - Flower Week 3 Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 10 September 2022 AC3Q 57:F:3:1 to 17 September 2022 Summary: Plant HeightBeginningOfWeek: [ 20, in] Plant HeightEndOfWeek: [ 26, in] *TBD* Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower Autofertigation - Enable - [ ] Growtek RINGS Calibrated - [ ] Growtek RINGS INSTALLED - [ ] Growtek OPERATIONAL LightSchedule: 12/12 amt: [ 1300, ml] # period: [ 360, min] frequency: [1, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 0.8] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.7, 1.8] ECearlybloom: [ 1.1, 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.8, 1.1] [ 1.1, 1.4] ECflush: [ 0.0, 0.2] Seedling Early Veg Late Veg Early Bloom Late Bloom Ripen Flush 400* – 500 1100 – 1400 1200 – 1500 1100 – 1400 1300 – 1600 800 - 1100 0 - 200 Fertigation Daily: - {pid: 4, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} - {pid: 7, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} FertigationtheRootedLeafFullRatios: # Flower Week 3 Primer A: [ 10] Primer B: [ 10] CalMag Fuel: [ 6] Silica Skin: [ 4] Lush Green: [ 4 ] Root Anchor [ 6] Peak Bloom [ 4] Resin Bloom [ 2] Last Week of Foliar FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] FoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.63, ml, 500, ml] # Cease Begininning Flower Week 5 NEW WEEK Week's Plan - (Added Veg week to allow SuperCropped Mains HEAL.) - [ ] Install Growtek Fertigation w/ 8” Rings - [ ] Run Feed Lines & Cut to Optimal Length - [ ] Calibrate Feed - [ ] Install Drain Lines, Cut to Optimal Length - [ ] Notch Drain Tube end to eliminate vacuum against drain pan _____ Sat 10 Sep 2022 AC3Q 57:F:3:1 # PM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 LightIntensity: [ 824, µMol/m2/s2] LightDLI: [53.4, mol/m2/d] Sun 11 Sep 2022 # AM IS 9PM Local TIme, the Night BEFORE. AC3Q 58:F:3:2 NOTE: - We’ve added a couple inches removing all restraints, and having flipped last week. As frequently observed, Both plants were clearly vibrant and vigorous after a nights sleep after restraint removal. - Zymes/Bonners/Ascorbic Acid - Soil surface, container sides, and container bottom (exposed roots) - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1000, ml], ec: 2.4 # AM - [x] Complete Previous Weeks GrowDiaries - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 # PM - None Mon 12 Sep 2022 AC3Q 59:F:3:3 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 - [x] As Below FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] Tuesday 13 Sep 2022 # AC3Q 60:F:3:4 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 Wednedsay 14 Sep 2022 # AC3Q 61:F:3:5 #AM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 - [x] Apply as Below FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] Thursday 15 September 2022 # AC3Q 62:F:3:6 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.2 pid: 7, amt: [ 1200, ml], ec: 2.2 Friday 16 September 2022 # AC3Q 63:F:3:7 # AM - # PM - [x] As Below Fertigation: pid: 4, amt: [ 1400, ml], ec: 2.4 pid: 7, amt: [ 1400, ml], ec: 2.4 _______ Saturday 17 AC3Q 64:F:4:1 CEASED FOLIAR Application: 2022-09-17T16:02:06-0500 # - [X] Complete Week’s GrowDiaries

Day 49 - 10/28/2020 End of Week 7 and now into Week 8! The two Liz's are both the bigger plants as the Chocolate Mint OG over-grew the Chem-Bomb Autos from my other diary. Even though both CMOG Auto seeds sprouted later/struggled to start the stress seems to have worked in my favour as it has in the past. I let them dry out a bit and gave them the final defoliation and LST set up to pull apart the plant and get light to all the secondary sites. Popsicle Sticked the bottoms of the smaller sites that would have taken energy away for larf so each site should be set up for quality over quantity. These are the two biggest auto plants I have grown so far so I am excited to see how thick the buds get on this one with the addition of the OG Kush Auto genetics compared to my Chocolate Mint OG Photo grow. Seems like the two I popped have really cut out the GrandDaddyPurp influence in the original photo line. No grape smell yet. Upped the nutes and molasses on the first feed yesterday Oct 28th. Took it well and no burning so after my next plain water ill add a bit more for the end of week 3 of flower. I didn't get them under the ScrOG in time because i had a partial brake on a Chem-Bomb so you can see in the group pictures i just applied the classic "tie to my pot" LST 😂 Will try to update for Week 8 ASAP, been back to work past few weeks so my free time to update has been cut down unfortunately. Thanks for checking in! Throw down a like and/or follow so I can return the favour! -- IG: @GlazedGrow (Let me know you're from GrowDiaries so I'll follow back!)