Likes
Comments
Share
Well had a lot of fun making my pot look amazing. There are some things hidden on here right now that will start to be reveled around weeks 4-6. At that time I will add the rest of the pot for everyone to enjoy. It's a fun one. Soaked her in water for 24 hours then planted her right in the Fox Farm - Happy Frog soil. Hopefully in a few days she will POP!! FYI the cover photo is of my wife's zombie corn tattoo. There is a reason for this. Will have to wait to see the surprise as to why it is relevant.
Likes
33
Share
@Roberts
Follow
Jack Herer auto is growing, and doing her thing. She is sifting into flowering, more and more. She should start stretching a lot very soon. Not much else to report. Thank you ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
9
Share
Been a good week, did a few upgrades to get tent as automated as possible and it's been going great now that I can make changes anywhere instead of rushing home or asking for help to turn off or adjust 😆 Is it possible to start getting foxtail mid flower? Ending 4th week now. Bubble gum ice cream showing signs. Lights are about 36" away from canopy and dimmed to 75% [photontek 600w pro] Very powerful, been tempting to lower to 50% as it gets pretty warm. I have 8" blowing out and a 6" blowing in the tent to keep positive pressure and constant air flow. Let me know what you guys think, any comment or feedback is appreciated and welcomed. Happy growing🌴🌴
Likes
3
Share
Removed some fan leaves and lolipoped and took 4 more clones!🔥💨🍃
Likes
31
Share
Starting to dial it in, I think? Finally, it seems my plant was growing faster than the chlorophyll could keep up. Thai and some ph adjustment and I woke up smiling 🙂
Likes
6
Share
@Redweasel
Follow
Both plants topped above the 4th node with everything below & all fans removed using a torch sterilized trimmer. Tops soaked in reservoir water with a pinch each of Recharge, Azos, aloe & coconut water powder, dipped in clone-x, then placed in Root Riot cubes that are contained in an ACI clone dome set at 75°F. Dome lights set at level 2. Bud clips applied to each branch & trunk manipulating to 90° angles. Cover crop chop & dropped. All material removed from plants salad chopped & added to the mulch layer of respective container. Hand watered both containers with 1/2 gallon 6.5 ph, 11 ppm, plain reservoir water mixed with 1/2 tsp each of coconut water powder, horticultural aloe powder, Azos & Recharge. Tray2Grow remains inactive until Sunday morning. Expression #1 Pre-Training Height 7" Width 20"×19" Post Training Height 3 3/4" Width 4" Expression #2 Pre-Training Height 8" Width 16"×15" Post Training Height 4" Width 6" Maintaining DLI-25 & VPD-0.85 to aid in recovery. Will reassess Wednesday.
Likes
31
Share
@Chucky324
Follow
Hello. Got the plants into the main grow room. There is 2 videos . In the first I just sit in the room quitly and turn the camera. you get a sense :) of what it's like in there. In the second I try to describe what's in the room, equipment and maybe a new technique. With the tomato cages I use, and needing the plant to slow down, I twist the stock into a large figure 8. Eventually I take off what is on the lower part of the 8, and just work the top of the 8. About 2 weeks in veg in this room. Then I take clones of everything before I switch to flower. >Carbon dioxide enhancement: I had to make that choice 20 years ago. I could, rent a tank and have my name on a list, at the gas store. Or make my own. They didn't have the small propane tanks like they do today for the blue flame you get when you burn it. I decided on a kerosene lamp burning down as low as it could be without going out. It makes a half blue and half yellow flame. I vent constantly so the small amount of carbon monoxide is not a problem. For the first week you can smell it a bit, but the smell disappears after that. I light the lamp in the morning and put it out at lights out (unless it's bed time). It needs to be put in a place in the room that cant get knocked over (pets, children, ?). I try to use extra attention whenever I use it. It can burn down the place. Be careful Please. >About 17 years ago I thought I'd lower my table by knocking a hole in the cement and dropping my 10 gallon reservoir more. I was able to lower it by 16 inches. Still have to watch the height of some plants though, it worked out well. Watch the video. > Air cleaner: The reason I got a big 8 inch exhaust fan was, I had a bout of powder mildew and needed better a exhaust system. When I plugged it in there was too much air moving. I phoned and asked and the salesman said that a dimmer switch wasn't a good idea. I put one on anyway. Works great. I have the fan barely on in the winter and about half way on in the middle of the summer. I haven't had any powdery mildew since. About 12 years ago I bought a good air cleaner. An ORECK, It has electrified plates that zap any organic particle or spore that come between the plates. Use to grow a Northern Lights that got 6 to 8 ounces per harvest, it grew big buds. Buds as big as my forearm. I had problems with gray mold attaching the buds. But none since I bought the air cleaner. Ya learn as you go.
Likes
37
Share
Plants had a bit of a ph issue with all the renovations on the veg set up the ph stick ran out of battery and couldn't keep the ph in check. now that is sorted though and we are running fine again. The plants are in the flowering room as the last set of plants have been harvested already. Veg room is almost built so the diaries will be up to date weekly and not this on and off posts, sorry about all that. The photos here are before and after training the plants after they had been topped a few weeks ago
Likes
23
Share
@Athos_GD
Follow
Strain was easy to grow. Had some herms but since I only have 2 plants I was able to pinch the balls off. Buds have no seeds and are a strong smoke. Really hits the lungs.
Likes
4
Share
@acidblue
Follow
End of 2nd week of flower update: Hooray I have buds! Little buds starting forming about a week ago and they have put on a little weight. Starting adding bloom booster IE; Bud Explosion from Mega-crop. Couple leaves on plant#2 shows signs of calcium deficiency, so I've been adding Cal+Mg Pro My LST skills are a tad lacking, this is my first attempt so its not too bad, should of started training a bit earlier. other than that Girls look healthy and happy :).
Likes
53
Share
@Mz876
Follow
Looking like she might go into flower soon . Excited. No deficiencies so far
Likes
2
Share
@smoker420
Follow
got bud rot on top head had to chop her down last time im doing a auto next to veging plants could not keep humidity down at last 2 week
Likes
55
Share
2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.
Likes
11
Share
@Wenz004
Follow
Experiment explanation see week1 this week got this: Plagron sugar royal 1ml/l Plagron power buds 1ml/l Plagron alga bloom 4ml/l Plagron green sensation 1 ml/l Aptus CalMg 0.6 ml/l smell is the best I have smelled ever...incredible
Likes
23
Share
@Weedinho
Follow
Looking good ! Moby Dick is looking more normal now... I think the problem of the wrinkled leaves was just plain old simple overwatering. Critical looks totally amazing. Cant believe I raised that one. The northern lights looks kind of like it was mainlined and it’s growing more in the form of a bush. If it manages to stretch a few inches before starting to flower it may produce good results.
Likes
16
Share
As the plant enters the fifth week of flowering, the first trichomes have begun to form. The buds have started to thicken considerably during this week. They are becoming denser and more robust, which indicates that the plant is channeling its energy into producing larger, more resinous flowers. Throughout the growth process, the cannabis plant has shown no signs of health issues. It has remained vigorous and resilient, with no observable deficiencies or diseases. To ensure optimal light penetration and airflow, the plant was lightly defoliated this week. The cannabis plant is progressing well in its fifth week of flowering. The formation of trichomes, the thickening of buds, and the plant's overall health are all promising indicators of a successful flowering phase.
Likes
29
Share
Okay, ladies and gentlemen, I am starting to get concerned.... This girl should i've been in flower for a while now considering she is in such a small pot ( 1gallon ) ... i'm starting to think I'm going to have to flip her tonight... I'm starting to think she is not an autoflower...idk tho .. Herbies Seeds thank you for letting me showcase her. If indeed she is not an auto flower, I would not hold it against you as I know mother nature is unpredictable and nobody, not one breeder, out.There is perfect ... hopefully everything works out well.But she's running out of nutrients, because she should be flipped already.. I hope everybody's doing well.God bless and happy growing 🙏 ✌️. P.S i flipped her to 12 and 12 two days ago, and she is now starting her stretch, so this is not an auto flower... Especially being in such a small pot, she should be almost ready for harvest, and as you can see, she's running out of nutrients because the growdots our for a cycle of 5 weeks of veg not 9 or 10 ... i top dressed with more grow dots.We'll see how this pans out... I'm not even sure if it's purple haze at this point... Hope everyone is doing well!! God bless 🙌
Likes
5
Share
Likes
11
Share
Welcome to Flower Week 8-9 of Divine Seeds Auto Black Op1um I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto Black Op1um Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 8W-10W • Strain Info: 25%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!