Likes
Comments
Share
We have 2 weeks under our belt and now we're charging into week. So far each day I can see more new growth which is encouraging. With a few more nodes in the next day or so I'll look at topping. Cheers til next time -Dj Sunstone
Likes
26
Share
She is starting to swell up and bud growth is at a good pace right now.... I'm really hoping for big things and some dark colors.. Thank you again to divine seeds for throwing this contest together.. Also, good luck to everybody that is in it.. Thank you guys for stopping by God. Bless and happy growing ✌️
Likes
19
Share
Hello everyone Today is the ending of day 2 in veg . I start by washing my hand ,prepping my area to germinate my seedling. I placed 4 seeds inside of a pre soaked root riot plug ( in reverse osmosis water Ph to 5.5 and great white shark mycorrhiza). Planted seedlings in seedling starter trey with humidity dome and heat mat sprinkle a pinch of mycos on seed then covered with thin layer of coco . sprayed The top of coco slightly not to move around seed . I spray the top of dome to lock in humidity Close dome and check in after 24hr . 24hrs later 100% germination . I now remove seedlings thats inside the seedling trey and plant in 3 gallon pots . By placing 1 root root plug inside of the 3 gallon pot filled with coco loco potting mix and some more added worm castings . Feed/Feed/water schedule Day 1 of veg, 5 Gallon bucket aerated reverse osmosis with 1ml of super thrive 1/4 Tsp molasses . Water seedling with 2ml of feed around base of plant Spray top medium if to dry or dyer than a inch deep . Day 2 of veg , added mycorrhizae to the 5 gallon aerated osmosis super thrive molasses feed water plant with 2.5ml of feed spray top medium if dry or dryer than a inch deep. Day 2 of veg will just be pure reverse osmosis aerated water ph to 6.8 .
Likes
13
Share
Added the Monster PK 18/20 to the mix at 0.25ml/L to see how she pumps up over the next few weeks. She already has gotten significantly taller and the bud sites now are more visible with small bits of trichomes starting to show.
Likes
20
Share
Edit: 1st January 2020 I started playing with making time laps video. You can see the first trial video over 28h period. It starts a bit slow cuz I was still figuring out the shooting interval. The second half of the video is shot with 1 picture every 1,5min, and I love it! It’s gonna be fun playing with this! 😁 31.dec.19 Happy New Year everyone! 🎉 And let the show begin, the girls are half way and starting to show pistils. I’m doing my best to tie them down to keep an even canopy. The Ph got finally stabilized at 5.5-5.9, I’ll start getting it a bit higher next week 5.9-6.2 In order to accommodate them all the ppm seems to be in the sweet spot around 650-700 at this point. It looks like the Criticals could use more, while the slowest of the Gorillas... well, she is slow, so she needs less. The temperature gets a bit low here, but won’t do anything about it, I don’t want to spend more on the electric bill then I already do. I’m looking forward for my friend to come and pick up the DWC GZ so I can have some more space to stretch out the rest of the girls. Oh, I’m working on setting up an old iPhone in there to make time laps videos 🤞🏼Just imagine watching those buds fattening up 😃 Happy growing in the new year! 🍀
Likes
2
Share
Processing
Likes
21
Share
Nice she has really liked the transplant and has exploded with healthy new growth. Very healthy looking indeed. I have seen noticable results from the folair feeding. darker thicker richer looking leaves! Excited to see the difference in flowers from this grow compared to the outdoor lady i grew this summer. hoping for 70+ grams from her!! Trying this new product out this week that i was given at the grow store. optic folair, has great reviews so well see the difference between this and folair feeding with vivokelp!
Likes
31
Share
@Neo09
Follow
We just build +1 Room, about 9Sq meter with 2000w HPS. We decide, cos we see a lot more of potence by this genetic i have to tell now, ~less is more~ ..if i talk about ammount pro sqM... As well we gonna change all small 6L pots for 11L. Where i see our reserve is, that we need to cut much more, of lower level‘s „bat‘s“ in VEG.. ⚠️ actually i know: „dont touch girl in bloom“ , but it was necesary last week.. really necessry to cut all that shit stuff on „bottom“ ... 330 girls on 16m2 in 6L & 11L pots
Likes
8
Share
Сорт понравился! Ни разу не стрессанул, в связи с этим и качество итогого продукта на высоте. Советую новичкам, кто хочет попробовать свои сылы в грове! Всем мира и хороших урожаев!
Likes
8
Share
@Lykal
Follow
Germinação, após germinar foi colocado num vaso 11l com solo All-Mix Biobizz
Likes
8
Share
The plants are now putting all their energy into bud production, and it’s really starting to show!🌱 Both are developing bigger and bigger buds, and the smell is becoming more intense every day. #2 has an insanely large main bud, completely covered in trichomes. The aroma is very hazy, deep, and complex. it’s going to be interesting to see how it develops in the coming weeks. #1, on the other hand, continues to impress with its tropical, sweet, and pineapple-like scent, and its buds are also swelling up beautifully! Everything is going exactly as it should—excited to see how much more they’ll bulk up in the next weeks!💚
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Processing
Likes
14
Share
@Reforced
Follow
Been trying to keep up with pruning, just trimmed all of them up a bit today (12/8) and watered 2 of the master kushs. Looking healthy for the most part.
Likes
2
Share
@Kreeze
Follow
7. Woche Blüte Langsam Stickstoff ausfaden
Likes
Comments
Share
@TyRun
Follow
Clones termination. Mom's flowering. Yep, this is an example of how it should not be done. The clones survived two cases of tip rot and a transplant after cleaning the tips. They finally developed some roots, but still didn’t make it. I kept only one, but I need two. So… the mom is about to start flowering after stretching, and I cut eight branches again to make a second clone. After some bending and tying, the mom returned to the flower room. If your light has a flower mode, now is the time to turn it on. The fast stretch period is over, so add some red light. It helps with yield. This time we’re going to do it right, using the experience from the first attempt at cloning. Check the clones 2–5 times a day. Keep the propagator lid closed at all times, and don’t let water touch the cloning medium. Also, the cubes shouldn’t be soaking wet, just moist. This balance between water content and airflow is crucial for future roots.
Likes
26
Share
All I can say is WOW just WOW, One plant is hitting the light and I can't go any higher. It is 53 inches tall. All but 1 is flowering really nicely. The 1 is taking its sweet time. They seem very happy and healthy. I have to defoliate every other day or so.
Likes
25
Share
@Roberts
Follow
Melon Gum is doing good. She is starting to stretch. She should start shooting pustils out soon. Everything is going well. Thank you Pure Instinto, Spider Farmer, and Athena nutrition. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.