Overall healthy plants would recommend microbe brew for anyone who needs a microbe feed Keeping a consistent airflow on them

This plant is massive..I hope it stops stretching like yesterday.

8/5/23 - Day 54 - Last night, a successful water change took place. I've attached a picture of the bucket at the top for reference. While I currently perform manual water changes, I have plans to automate the process using the available hookups. Unfortunately, the unit was shipped quickly, leaving me no time to set up the automatic system before receiving the LEAF box. However, on my next grow, I'll ensure the drain and water inlet are properly connected. During this current grow, the bucket you see at the top is always connected to the drain as a precautionary measure. I can activate the draining process through the app, and after two cycles, all the water, including the water collected by the dehumidifier, is efficiently removed. Following the draining process, I fill the box with RO water, and from there, the LEAF box takes over and automatically dispenses the necessary nutrients. This automated system has made the whole process incredibly easy, eliminating any guesswork. I simply empty and fill the water; everything else is expertly handled by the LEAF box. The flowering stage is progressing exceptionally well. The plant has ceased growing upward, and the buds are now thriving and reaching new heights each day. I find myself eagerly looking into the box daily, excited to witness the changes, especially around 2 pm when I can observe the growth since the morning. It feels like Christmas morning every day! As always, I'll keep adding daily pictures to document the incredible journey. 8/9/23 - Day 58 - It's been a few days since I have posted. Thats because Shes growing bud like crazy. You can see the plant has focused on growing the buds because the plant has stopped stretching up and started swelling the buds. We have about 3-4 weeks until harvest. This has been the easiest grow of my life. Basically, I add some water to top it off and that's about it. I have been moving some branches down as they start to get a little to close, but other than that not much input from me. If you are looking for this experience, check out https://www.getleaf.co/

Overall I’m happy with how the Blue Dream from Crop Kings came out, despite losing one plant to some odd characteristics likely brought on by being a new grower, but upon receiving input from others, the genetics of that particular plant may have been a little off. I picked a small bud 1 week prior to harvest, and let it dry for 5 days, the wife and I smoked it while camping and thoroughly enjoyed the high it produced. Obviously the on the scale weight is way off at 1338 G, lots of moisture and tons of stem weight. Will update with a total next week when drying is complete. After drying for a week I have now jarred and weighed the final result, and the final tally is 140.77 g or 4.969oz. A very energetic and long lasting high.

If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.

Had to support the trellises, definitely need a middle support next time. This will work for the last few weeks

7/3/22 Stella is still moving along with the late bloom nutrient level this week. She’s getting close to the ripening stage, but still a week away. Today she received a full gallon of water mixed with the following nutrients: CALiMAGic - 2 ml FloraMicro - 3.8 ml FloraGro - 3.8 ml FloraBloom - 4.2 ml Floralicious Plus - 2 ml Liquid KoolBloom - 1 ml The pH was 6.6, and wasn’t adjusted. She took nearly the whole gallon before giving back some runoff, but it was sufficient. The runoff pH was 6.3. The tent was 80.5F, with a humidity of 60%. She is starting to fatten up and her branches are starting to get weighed down. I’ve already used all of my LST poles on other plants, so I’m going to have to figure out a way to make more space. She sits in the middle of the tent, surrounded by 4 of her daughters, and a smaller auto-period plant sitting on a box in front of her. My tent is FULL! I ran out of time today and didn’t get any new pics of her, so I added one that I didn’t use the other day. Take care, and happy growing everyone! If you’re in the USA 🇺🇸, July 4th💥, happy Independence Day!! 7/5/22 Well, it finally happened! Stella’s branches have gotten heavy enough to tip her over when she has space to herself. She is in the tent with several other large plants (her 4 daughters + 1), so she rests nestled amongst them, so she stands. When I took two of her daughters out of the tent to feed them, she tipped right over. To make a VERY long story short; I tied her upright with almost all of her branches bundled up loosely so that they all get light, then fastened her to the back of the tent. It’s going to make feeding her tricky, but she’ll be stable, and getting full light exposure. It also opens up more space in the tent. Not much, but some. I tied up her daughters branches too. Enough about that. She received a full gallon of water mixed with the same nutrient level as the last feeding noted above. The solution pH was 6.5, and wasn’t adjusted. She gave back plenty of runoff with a pH of 6.3. The tent was 83F, and humidity was 65%. That’s a little high to me, at least compared to my previous grows. However, my tent has never been this full before. I adjusted the fan to a higher height, and with all the plants tied up somewhat using LST methods, I’ve increased open space between them with hope of improving air flow. We’ll have to see how it goes. Happy growing everyone! 7/7/22 I’m just going to write the basics today. Stella is still triced up nicely in the back of the tent so that she doesn’t fall over because of the weight of her own branches. Her buds are continuing to fatten up, and she looks lovely! Orange hairs all through her buds! Yummy!! She’s still getting the late bloom nutrients till next week when we actually begin the ripening stage. Today she took a gallon of the following: CALiMAGic - 2 ml FloraMicro - 3.8 ml FloraGro - 3.8 ml FloraBloom - 4.2 ml Floralicious Plus - 2 ml Liquid KoolBloom - 1 ml The pH was 6.6. I thought of adjusting it, but decided that it was good enough. She gave back plenty of runoff with a pH of 6.3. The temp was 83.3F, with a humidity of 54%. I didn’t take any pictures of her today. I was running between 2 rooms, and feeding other plants and just forgot. 🤷‍♂️ I’ll get pics later. Happy growing everyone!

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Heya👍🤙👍🌱 All good. Busy with Major projects. Check out my Facebook profile: https://www.facebook.com/share/v/H6PnoahTHrEzm63U/?mibextid=oFDknk Big BIG BIG thank you to Sebastien, Heather from Fastbuds420. You guys are the best. Can't wait for the next live. Even Bigger shout out to Hydroponic.co.za. My local Hydro Shop and Sponsor. Thank you Sir. 👍🤙👍🌱

Switched the autoflowers to another tent to give them 300 watts of led everything is growing fine

Kommen jetzt langsam in die Wachstumsphase. Beginne leicht mit 2ml pro Liter Root juice. Hauptlichter auch an, aber mit 50cm Abstand. Update 15.12.2020 Sie wachsen alle sehr gut.

It's been a pretty easy week. Enjoying watching the buds get thicker! Just going to coast to the end at this point....hoping to harvest within the next 2 weeks. Already getting excited for my next grow...thinking Ethos Planet of the Grapes or Ethos Crescendo.

WOW these two beauts are really filling out! No complains from me just wish I LST the SBR like i did the Dinafem but at the time the SBR wasn't as bendy as the Dinafem, it is amazing what one bend can do to help produce more bud sites. I'm sure that one big cola from the SBR is going to very nice looking though! My next photoperiod grow I will prob top, LST and trim, but i need to do some research again because I forgot everything lol 😅. My next grow journal is up! Growing two Seedsman Pink Kush CBD 1:30 Autos! 👍

The buds are getting bigger and icy, it seems Delta 9 did its job good. You can smell the fruity odor coming from the bubba buds. I hope they get a little bit fattier to compensate the short height. Can´t wait to taste them :))

I forgot to wet weigh unfortunately..

Buds are starting to really stack up and forming really nice colas. thought they were gonna stretch a lil more but it looks like they've stopped. Was gonna add a scrod net but it doesn't look like I'm gunna have to.👍

Day 86, 5th of December 2020: Absolute adorable. She is the most calmed from the Original Sensible Seeds family I am currently growing.... No problem no crazyness she just keeps going.... Looking pretty like this plant! Not much to say we are here at beggining of the 5th week :) The lamp is now on 11 hours and off 13 hours. Every week 15 minutes was taken off and after 4 weeks here we go. Strated 12/12 and now 13/11 wanted try to imitate the nature as the light days are getting shorter. Fertilization has changed no more epsom salt from this week and I will stop giving nitrogen as well from next week.

Day 83 flowering: Wow was that some ride with this huge lady ?. What seems like a never ending flowering cycle has hit its peak now and I want to pull her before the stress has her create foxtails on top of these odd structured flowers. Shebhas been fun to watch but at the same time frustrating. Seeing how she bounced back from the defol and clear out pre flowering and how she stretch to this size so quickly, had me convinced I would have a cola monster come harvest time. I dont doubt her yield will be worth the time and effort. Her colours are very attractive close up and the berry like structure is unique to any 8nhave grown before. She stinks to high heaven of Lemon and cat pee. lol hope the taste is more refined.lol I will update more pics as we get towards a harvest in about 10 days time. be safe and well growmies.. UPDATE ### So she is finally finished , I don't want to push her beyond her limit. She smells so strong now and should be a nice potential finish.Hopefully about 7-10 days low and slow drying will finishbjer perfectly. Fingers crossed ...

2000 ml alle 2 Tage pH-Wert: 6,1 EC-Wert: 1,2 Temperatur: 22ºC Luftfeuchtigkeit 62% Schädlingsbekämpfung: PPFD: 500 µmol/m²/s DLI: 33 Düngemittel: Mineralischer Dünger 3.5-6-6 PK 13/14 Besonderheiten: Wurden direkt in die erde gepflanzt in einer Kokos-Quelltabletten. -Tag 65 Heute haben wir ihr wieder Wasser und Mikroorganismen gegeben. Wir haben sie auch wieder stark entlaubt damit die luft besser zirkulieren kann und sich kein Schimmel bildet. -Tag 67 Heute haben wir sie mit 2000 ml Wasser gegossen, versetzt mit 1,5 ml Calmag, 5 ml Canna PK 13/14, 1 ml Plagron Green Sensation und 1 ml Plagron Power Buds. Der EC-Wert lag bei 1.460 mS/cm und der pH-Wert bei 6,2. 👽 -Tag 69 Heute haben wir sie mit 2000 ml Wasser gegossen, angereichert mit 1,5 ml Calmag, 6,5 ml Canna PK 13/14, 1 ml HY-PRO Epic Blast sowie 0,32 ml HY-PRO Generator. Der EC-Wert betrug 1,480 mS/cm und der pH-Wert lag bei 6,2. 😎