This strain was easy to grow, she started flowering on the 5th week and reached maturity on the 13th week (8th week of flowering). I had 2 of these plants growing at the same time. White LSD#2 took on a reddish/burgundy tone which made it look completely different from#1 All in all it was really a easy grow.

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.

hoy lunes actulizo solo he regado ayer con bloom de atami. voy a estar regando solo con agua nada mas durante unos dias hasta q vuelva actualizar, como vemos ya esta comenzando a sacar resina poco a poco y ese engorde ya va dando sus frutos.

Second week of flora is complete, a few days ago she decided to show herself as a beautiful girl 💅🏻💅🏻💅🏻. Good development, very good structure and looking forward to the next few weeks.. 🏻💪🏻

At the second day of week 2 the first two leaves of each Mimosa look a little crinkled, but the environment is ok and the Peyote in the same tent looks good so i think it is characteristic of this particular strain. At the fourth day of week 2 the plants show signs of explosive growth

Hey everyone 😀. These weeks they have continued to develop very well 👍. They have made a huge leap forward since they were repotted 😃. They will be topped again this week, and will then move to the flower tent next week 😍. I am very curious to see how it will develop until next week. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Día 56 desde que salieron a la superficie y así es como se ven. Desarrollo sano y explosivo para estas nenas, se han ido llenando de tricomas y todo sigue bastante bien y normal.

Another good week. She's filling out nicely now.. her citrusy smell is starting to come through. Had no issues this week.. planning on adding some boost to her next few feeds.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 1 since time change to 12/12 h. Hi guys :-) . The time has finally come 👍 You have been switched to 12/12 hrs and are ready to flower. Of course, cuttings were cut beforehand to keep the genetics. For 4 days now she has also been getting Fast Buds from GreenBuzzLiquids. They were also sprayed again with GBL Fast Plant spray. She is very healthy and I am excited to see how she gets going again in bloom :-). This week it was poured twice with 1.2 l each time (for nutrients, see nutrient table above). Then I filled canisters with fresh osmosis water for the next few weeks 👍. The tent was cleaned and every plant was checked for health. At the moment I am tinkering with the ventilation because there are currently 4 fans with 4 activated carbon filters running, which I want to make more efficient by putting a hose through 2 tents. These are the things about which you desperately at the beginning but learned from them in the end. I wish you all a nice week. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

14.09.21.Банане 2 недели, развитие сумасшедшее. Опрыскиваю по листу на ночь динамиксом.русские производители обещают эффект мегафола, а он мне понравился. Так как цена демократичная, я решил попробовать этого производителя. Также купил стимулятор для корней, аналог радифарм. Ок. Девчонке нравится. Лист выглядит здоровым, сочныма корневая мне не видна😁, но вершки хороши, значит и корешки в норме. Пересадили в 16 л airpot в 12 дней. Полет продолжается. Буду добавлять мысли в течение недели. Всем растафарай! 15.09.21 сегодня начались тренировки у девчонки. К lst я отношусь всегда творчески и с азартом. Каждое растение как и человек - уникально, тренировки интересны возможностью применять весь потенциал своей фантазии на 100%. За это растения благодарят нас большими урожаями и эстетической красотой. 17.09.21 Банана растёт и пухнет. Дал корневой стимулятор рутфарм. 2мл/л. Со вчерашнего дня у нас похолодание до +10 днем и +3 ночью, поэтому решено было включить днат 400, так как мой бокс расположен на балконе. Ещё немного подогнул ствол и убрал листья от боковых побегов. Полет продолжается, спасибо за ваше внимание, гровер!)) 19.09.21. Немного растянуд девчонку сегодня днем, растёт не плохо, но видно, что после пересадки переключилась на корни. Поливаю через день, полет продолжается! Всем спасибо, что уделяет внимание моему дневнику🙏🙏🙏

Very easy strain to grow yields well as has some cheese in the cross. Flavour is sweet with cheese with an old school earthy twist from the black Domina

No food just Water (Grow Dots) Day 22 Transplant to 3gal pots Day 23 start of LST

End of week 7! This plant is looking amazing. Done giving it all the nutrients just the base and overdrive to finish her off. 2 more weeks I'd say and we are harvesting!

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 28 Just a quick update for this morning since I had to move the ties a little. LST, I now have them above the 3rd node branches. Stats are normal and the growth tips are turning upward now. Stats 73F/ 63% RH /IL Vent at 33% - Lights also same as before 345ppfd highest, 330 center, and 315 at lowest. No need for adjustment. She seems to be taking the training well. Day 29 Water day - checked last night and decided it was time again - Water by weight again so no runoff to measure at about 4 cups. (4 days since last feed by weight) 13lbs even par is 15lbs 4oz so I prepared 2lbs 4oz of water. Tested my meter and discovered it needed calibration (the temp is off and cant be calibrated - so I used a trusty meat thermometer. started with 4ppm and added 300ppm of epsom and vegmix ph balanced to 6.34 at 69.8F - then splashed with H2O2. Poured around roots and splashed the stem base - sprayed some on the leaves and use the whole amount. Had to adjust lights now to be brighter so I brought them down to 18.5" and ppfd is now 375highest 360 center and 345 at lowest. VPD is normal at 1.0 with 73F /63% RH /33% IL Vent - fans are pointed to directly now as the leaves are starting to get rough feeling - so I moved them a bit to blow less directly Training is doing good nice upward turn on the training (making small LST movements with the ties other than than... just letting it make new branches. Day 30 Checked PH and got 5.0 on my meter(+1.25 tested differential = 6.25) Stats normal too - 73F /64% RH /33% IL Vent - Lights at 385highest 370 center and 355 at lowest Removed cross ties since they are no longer needed to hold the fan leaves- training still looking nice as the new nodes are formed with 2nd node leaves growing already. Day 31 Identified an issue this morning - went back through my pictures, identified the start, looked at the day before, and noted my changes that I took notes on at that time. Went to google to diagnose a few possible hypothesis and am now testing with a treatment. (suggestions from more experienced growers welcome) This morning the issue was brown spots on the older fan leaves. Mostly just the left fan leaf. Seems to have started 2 days ago (day 29) when I changed the lights and fed her. When I fed her, I left water droplets on the leaves instead of drying them off after a short time (I had been drying them with a tissue after a wet pic. The fans were also adjusted after the lights were dropped closer as well. Hypothesis: I think the water was magnifying the light and caused light stress at the those spots. I dont think the wind of the fan had much to do with it other than they helped dry the leaves faster as noted by the water being completely gone by the time I took pictures later that night for measurements. Test: Raised my lights to a max of 350ppfd (from 385 highest reading this morning) Had to adjust fans again since they rest on my lights. Will observe looking for improvement over the next few days. ... another possibility was given to me by Guru @Roberts (thank you) as it possibly being a ph issue locking out calcium. So I thought I might test ph and then try diluted cal/mag in a spray if my soil is too low (also looked at pics and seen VERY close similarities in my pics and those) and so on that advice, I tested/calibrated my soil meter (it FINALLY calibrated for me!)I found my soil was avg of 3 readings at 5.153 (5.08,5.09,and 5.29) NOT GOOD - potentially locking out most all nutes. I weighed out about 2 cups of purified water with and added about half ml of CalMag, ph balanced the water to 6.5 at 69.7F (my research shows Calcium lockout starting at 6.3 or lower) and splashed with H2O2 - I poured most around the base and sprayed the leaves too. I made sure to use the whole solution by pouring the last of the solution in the spray bottle over the stem and stem base. EOD follow-up Found a possible calcium blockade in my ph and on my leaves (of which are now starting to curl so I placed my fans on oscillate to ensure they aren't doing more damage) --- fully documented now. otherwise measurements are now documented too. -- second node is starting to pull away from the last top so I will be looking to top again (3rd of possibly 4 total) and then HST and bind in a new spot Day 32 Doing a morning and evening check her now while I see this issue resolved. So far no sign of improvement since last night - might have gotten worse in comparison (will check pics side by side today) but I think because it's a immobile micronutrient so it should take time to stop then reverse. So in the mean time I am doing a slurry test as a 2nd test for my soil before I treat it. I took soil from 3 different spots and made sure I got some from about 4 inches deep in each spot (ensured calibrations were still good with buffer tests) 1st test is a PH meter tested directly in the soil. After using the 2 cups of 6.3 yesterday I got 3 readings today = 5.47, 5.32, and 5.5 to avg 5.43 - (yesterday's readings prior to treatment were 5.08, 5.09, and 5.29 to avg 5.153) - still far below the normal 6 to 7 for soil and the requirement of 6.3 and above for calcium to enter roots. suggesting again lockout. So while I am checking the plant conditions I also looked at the new nodes - 2nd node is starting to pull away from the first, but not quite enough to top yet - thinking I will be able to top tomorrow evening - should be able to correct the ph tonight, so I can see if there's results in that by then as well. I also set the fans to oscillate last night, so here's a video for that now. Measurements, ppfd, and vpd will be in tonight's check-up Day 32 So I started this evening by testing the run off with 2 meters, 5.7 and 5.67 - prepared 1 gallon of 7.5 ph water and splashed with H2O2 (checked with both meters) Before flushing, I documented the leaves again - still curled and look very dry but they still have some flexibility with them - they dont seem to getting any worse so the spray may have gotten enough to the leaves most affected. The new nodes and growth tips seem to be okay but not growing as fast as they were. That would still mean that the soil needs treatment before the roots begin to die off and I end up with stunted growth overall. SO I flushed the whole gallon and noted the runoff from the sides and bottom. I then tested the soil directly with 3 readings 5.95, 5.8, and 5.73 for avg 5.826 and tested the runoff water with 2 separate meters for 5.91 and 5.85 Not sure if I should feed dunk in 7.5 still or just use that number on the next feed in like 3 or 4 days. will discuss Other than that ppfd highest is 360, 350 at center, and 330 at lowest. VPD was 1.0 with temp at 74F /63% RH /33% IL Vent Growth tips could be ready to top again tomorrow night, but I would like the get the ph taken care of first. Day 33 Started the day by noticing the lower branches seem to stop turning and the next level branches seemed to have finally turned but nearly as fast as the first. (Noticed them having a start yesterday) Newer branches dont have any signs of issues. So the plan today is to make Bloom Juice for later. Feed Dunk with 100% Veg Juice at a ph of 7.3 test runoff and ppm. Top the 4 nodes and remove the lower leaves. Calcium issue or not, that was always the plan with main-linning the plant. However, because of the health issues, I dont think I am going to go past these 8 colas - rather instead I will simply stop here and do some HST to set them how I want them to grow and let her recover and finish her veg for about two or three weeks. Dunk had 300ppm of Epsom, Veg juice, in a little over 3 gallons of purified water. I had 7.4 ph and splashed with h2o2. I pushed the entire plant into the water and soaked for a few seconds. Drained by hanging the pot up for about 10 minutes and the stream started dripping instead. Checked the runoff with 2 meters 6.01 and 5.93 with 2580ppm. Then I topped all four nodes and removed the fan leaves from under my mainline. I used LST to finger press the new branches apart into the direction I plan to move them to get the nodes powering up. Next I will wait for a day to do HST on those new branches. Tonight I will simply let her rest. VPD still at 1.0 - 73F /63% RH /33% IL Vent - Lights are at 365 highest, 355 center, and 335 lowest. No need to measure for growth now as I dont plan to top anymore Day 34 Early entry to day for HST the morning after topping. So I started off the morning checking stats and health. PH levels are still low. 3 soil meter tests 5.41, 5.41, and 5.44 for an avg of 5.42 - kinda at a loss here but can only monitor now. VPD and lights are mostly the same - 74F /63% RH / 33% IL Vent - VPD not relevant today as the settings are the same and I am using HST to change the plant position. leaves are noted for future reference - all four lower fan leaves have signs of calcium deficiency but not progressing nearly as fast as the first two did, so I think my attempts via higher ph water and feed may have helped. (I know the microbes in the soil are supposed to help get past ph issues , but mine seem to not be heathy) HST used a cuticle rod from my wife's nail case and a paint stick to press the rod against the branches and smash the inside of the elbows I want to bend. LST I then cut 4 strips of garden wire at the same length, hooked the ends like candy canes and aligned them about 1/2 inch above the new node and into the soil. From the side they look level but have the leaves now facing sideways. They will turn in a day or two.

Шишка впорядке,растёт и нескучает.

I don't remember @dutch passion

They are all showing preflower and chugging along nicely.

Note : Jegliches Equipment aufgelistet welches ich nutze findet Ihr in der Germinations Woche !!! Day 15 : ich weiss noch nicht ob der mineralische dünger wirklich sofort etwas gebracht hat . schauen wir was die zeitraffer so vermitteln. ist es seit gestern schneller am wachsen ? Day 16 : PPFD 275 * 20h = DLI 19.8 Day 17: + 0.5L Flaschenwasser (EC 0.26) + + Canna Rizothonic + + Canna Terrar Vega + = Total EC 0.68 (PH 7.2) + Final PH 6.15 Day 18: es wächst Day 19: es wächst immer noch ventilation übern blätterdach angemacht. ich glaub daher kommt das ruckeln im video Day 20: + 0.5L Flaschenwasser (EC 0.26) + + Canna Rizothonic + + Canna Terrar Vega + = Total EC 0.68 (PH 7.2) + Final PH 6.15 + 0.5L Leitungswasser (PH 8.0) Der Stamm hat sich in den letzten 3 Tagen verdreifacht vom Volumen. Jetzt hat er so Bleistift dicke erreicht. Day 21: die temps und relative luftfeuchte sind hier zwischen 58%-68% und 23.5°-25.5°C . reguliert sich aber immer zu den höheren werten . ist hier halt so :))