The Grow Awards 2026 🏆
Likes
27
Share
@Major
Follow
I have an average week the buds have not grown as big as I thought we always expect more I think, I came back to the plagron green sensation and plagron alga bloom to see if it is better. this may be due to my defoliation made recently. I hope it will work out because there are about 4 weeks of flowering left. good grow everyone
Likes
3
Share
The plant came down after 115 days of life, and 59 days of flower. This is the 5th Papaya Sherbert I've grown, and the 3rd one to herm. I really tried everything possible to ensure the plant was stress-free the entire grow, but it still grew pollen sacks. Thankfully, I know to expect the pollen sacks to show up in week 5-6, so I was on top of it and removed all the problem areas early. The benefit of that is that it pushed me to lollipop harder than I usually do, and I really like how it made trimming easier, and the buds generally bigger. The overall bud structure on this plant was nice, but it did start to fox tail towards the end of its life.
Likes
1
Share
@TTerpz
Follow
Week 3 Day 1: 8/16/25 Fed with nutrients : 8/15/25 Flushed with sledgehammer: 8/18/25 Fed with nutrients 8/20 or 8/21
Likes
1
Share
Me está gustando mucho como huele Muy frutal Estoy agradecido ya que las plantas resistieron y siguen creciendo Revisando parámetros y limpiando Alistando para el día de corte
Likes
3
Share
1.4.25. Purple Lemonade PH 6.86 water 4 L 1.4.25 BlurDream PH 6.68 & OverDrive 4L
Likes
6
Share
Tardamos un poco en finalizar la anterior y además con alguna que otra plaga, estás se están recuperando de las plagas bastante favorablemente... esperaremos con el transplante coja más cuerpo farmers!🙏🍁
Likes
21
Share
@gr3g4l
Follow
con 64 dias y viendo el estado de los tricomas diría que voy a empezar a regar con agua sola , unas 3 veces más en el que añadiré en el riego Dos de acido cítrico por uno acido ascórbico y en 7 -10 dias cosecharé.
Processing
Likes
2
Share
12week Leaf started like mutating into like a claw and some leaf don't have the same amount but I think she doing good. Almost finishing week 12 buds are getting size now getting a little bit dense
Likes
24
Share
NOTES: I stopped using the root stimulator as I fill the tanks, next full nutrient solution change to mid-bloom phase is at around 3rd to 4th week flowering. I'll I stop using the Grow nutrient and will increase Bloom the same amount. A lot of training on upper parts with the net and some light defoliating on lower parts of the plants. Day57 (12.12.) Day58 (13.12.) Defoliated and pruned my plants a bit more. Removed some big fan leaves covering large areas of becoming bud sites but mostly focused on lower leaves growing inwards, blocking growth, airflow etc.. Added a video afterwards. Day59 (14.12.) Day60 (15.12.) I continued doing the same as before, light defoliation mostly under the canopy. Day61 (16.12.) Day62 (17.12.) Everything looks good and my teenagers are finally beginning to flower, also no signs of any males or hermaphodites so that's good. Filling the net and keeping the tops and bud sites at the same level is a lot of work since they've stretched a lot. They've also needed some pruning and defoliating but I've tried to not remove too much before they've finished growing bigger. After that, propably on 4th week of flowering I can decide better on what to remove and what to keep for the rest of the grow. Day63 (18.12.) I started the last heavier defoliation process which includes removing around 50% of the upper leaves blocking airflow and light to the developing bud sites. I'll continue the process propably a couple days so I don't stress them too much. It's pretty time-consuming to dive in to each plant and remove anything that's unneccessary for the rest of the grow, keeping that in mind I don't even have the time to do everything at once. This includes the bottom nodes and branches that aren't going to reach even close to the net, the leaves that are blocking the light on top, and the leaves at the bottom of the canopy that aren't getting basically any light. Thanks for the tips! 💪
Likes
2
Share
9/7/24 this is a clone from my outdoor jokerz plant. she's had to reveg but is currently showing new growth. i wanted to see what she looks like when grown indoor. i wanted the outdoor ones to be indoor plants[ i mostly run indoor] but they got too big for my space but i didnt want to consider it a complete loss and took some clones. 9/12 her growth is improving. i didnt realize that this was considered monster cropping. Underneath the main she has atleast 4 side branches coming out thats new growth. im curious to see how this affects plant growth, plant training and over all plant FYI the pictures and test results that i posted are from the nurseries website that the clones/cultivars i have are from. i have no affiliation with them. im a rec grower in a rec
Likes
16
Share
@nonick123
Follow
Día 15 (27/01) Ha reaccionado bien al trasplante. A ver como se desarrolla en los siguientes días! Día 16 (28/01) Muestra un buen desarrollo con las primeras ramas formándose Día 17 (29/01) Subo a DLI 40 Muestra un color verde estupendo 😍 Día 18 (30/01) Tras subir el DLI la temperatura en el indoor ha subido a de 22ºC a 26 ºC, de modo que va a acelerar las necesidades hídricas Se sigue desarrollando estupendamente 😁 Día 19 (31/01) Seguimos a buen ritmo Creo que debería haber regado este día... (Visto como estaba de seca al día siguiente...) Día 20 (01/02) Elimino las ramas más inferiores (1er nudo) que siempre suelen quedar débiles en el stretch Riego con 350 ml H2O RO Día 21 (02/02) Empieza a estirarse! 😍 Está sedienta! Riego con 350 ml H2O En una semana a floración! FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fast_buds_official_ @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
4
Share
Esta semana he tenido un poco de problemas con la planta debido al cambio de clima para la floración de mi planta cambio a un lugar selo exterior el clima está algo frío y con poco sol pero igual se ha desarrollado muy bien esta semana 🙏🙏🙏🙏
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
5
Share
3. November Alle drei Pflanzen weiterhin topfit. Trauermücken aufgetreten. Habe das abgelaufene Päckchen nematoden für die runtz genutzt. Hoffe es bringt was 4. November Cookies Gelato hat den harten Mainlinecut bekommen. Spitze wurde entfernt, Seitenteile wurden direkt danach abgeschnitten. Sie wird’s schon wegstecken. Tropimango und runtz geht’s gut :) Cookie gelato hat bereits wenige Stunden später die Blätter wieder hoch gestreckt. Stagniert. 5. November Alles gut. Die Schnitte wurden gut verkraftet. Triebe wachsen wieder Cookies gelato ist nun 21 Tage alt. Tropimango ist nun 18 Tage alt. Runtz ist nun 7 Tage Alt. 7. November Cookies gelato wächst. Sobald die Klammern da sind wird sie runtergebunden Tropimango hat schnitte und Lst bekommen. Topping werde ich noch abwarten. Runtz wächst 8. November Cookies gelato hat LST + mainlineschnitte erhalten. Wurde nicht mit gießen kombiniert da ich gestern gegossen habe. Tropimango erneut LST. Runtz wächst. Sieht aus als würde sie langsam ins Wachstum wechseln. Erster Triebe am einzahnblatt kommen. Dreizahnblatt erst frisch entwickelt. 9. November Cookies gelato wurde das erste mal zusätzlich mit Sugar Royal und calmag versorgt. Hab’s davor vergessen 😅 Shit Happens. Wurzeldünger gibt es konstant weiter. Runtz wurde mit wurzeldünger und calmag versorgt Tropimango hat noch sehr feuchte Erde. Keine Ahnung wieso.
Likes
15
Share
@Chubbs
Follow
420Fastbuds FBT2313 Germination Week Time has come yet to start another amazing Tester strain from 420Fastbuds FBT2313. Started germination on 2/7 by soaking the seed in just water for 48hrs then planting it directly in the soil (Roots Organic 707) in a 3gal fabric pot. I spray the top soil with my gallon sprayer keeping it moist for the next week. After 48hrs in the soil we have sprouts that emerged that appear to be healthy and happy. All in all Happy Growing
Processing
Likes
6
Share
@NastyNug
Follow
End of Week 5. Either over watered or not enough CalMag in Week 4. Lower leaves yellowed and looks like growth stunt in 4. Increased CM, looks like coming back.
Likes
13
Share
Jackie is all flushed out shes fat frosty sticky and stinky she smells like oldschool skunk shes stacked great buds could be denser but i expected sativa style buds with an indica coating of resin and thats exactly what she is so no complaints looking forward to the harvest report thanks for reading happy growing guys
Likes
69
Share
[DAY 36] - 6/7/2022 - 29°/30° and 60% RH average; - TS 1000 set at 75% = 112 watts and 45cm away - After bending the plant has returned to about 38cm in height; - EC 0.9 / 1 - PH remains fixed at 6.4, no matter how much PH down I put in the solution, it will always return to 6.4 after few hours; ------------------------------------ SCROG TIME AND DEFOLIATION IN SEVERAL TIMES ------------------------------------ - 8 PM - Lights on and scrog net mounted. The scrog net is about 25 cm (10 inches) from the clay and I have tried (at my best) to space the individual branches in the various outer squares of the net. In the next few days I will try to better fill the free squares to try to fill the scrog net completely. - 6 HOURS LATER - I was very rude due my inexperience. Despite that, plant seems already recovered, it is drinking and the branches are already bending to seek the light. [DAY 37] - 7/7/2022 - Just removed some leaves under the canopy who won't get light. I did defoliation in different times due I wanted no stress the plant too much, I hope it was a good idea. [DAY 38] - 8/7/2022 - More defoliation - Bent branches through the net; - Added peppermint oil on the lid to prevent insects from getting into the tent; - Today temperature is cooler, which is why I decided to keep the light off for only an hour. I took the opportunity to give the plant more light after the stress of the last three days to allow it to recover faster. It will go to sleep directly tomorrow at 5 pm until 9 pm, as usual. [DAY 39] - 9/7/2022 - Mounted the carbon filter; - Tried to fix the scrog but I broke a branch; [DAY 40] - 10/7/2022 - Today I tried to lower the net but it is harder than I thought. By now the branches are stuck in the net and I was able to do very little. - I probably made it worse, Before the branches seemed to me better spaced and now I'm afraid of forcing my hand too much, I risk getting even worse. For a couple of days I leave the plant alone, it's not growing so much; - EC 1.1; PH 6.2-6.4; Still drinking about 2 l/day; - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides are going up and slowly approaching the lamp, but I don't move it higher because I want a strong light to arrive in the center to allow the lower branches to rise and reach the others. We hope well - I am worried that I've stressed the plant too much, there are numerous branches (even recent ones) with a color tending to red / purple. I hope she recovers well and will try to stress her to a minimum in the next few days. For the first time I had to take care of the plant directly, handling the branches and defoliating. Surely someone more experienced would have done a much better job than mine. Get back soon HULK [DAY 41] - 11/07/2022 - EC 1.3; PH 6.4 - Temp. 28° / RH: 50%; - Today I started raising the EC from 1.1 to 1.3 and the plant reacted well. I used the solution prepared 2 days ago with: demineralized water EC 0 / 0.4 g/L SILICATE / CAL-MAG up to 0.35 / A + B + HYDRO BOOSTER + 1/2 dose of BLOOM STIMULATOR for a total of = EC 1.3. Having to add 2 liters to the DWC, I raised the EC of the made solution from 1.3 to 1.7 with the only addition of CAL-MAG => TOTAL EC IN DWC = 1.3. The plant seems to react well, after 6 hours the water level has dropped and the EC dropped from 1.3 to 1.2. The plant shows to be hungry, especially for CAL-MAG. Over the next few days, I will keep EC levels well monitored and act accordingly. - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides still are going up and slowly approaching the lamp. I start to see very few leaves with yellow tips, if it continues like this, I move the lamp 5 centimeters away from the center; - For the moment I stop with the defoliation for 10/15 days, on the advice of @SwissKush [DAY 42] - 12/07/2022 No update. I'm fine, don't worry.