The Grow Awards 2026 🏆
Likes
Comments
Share
Heya growmies. She finally started stetching this week, unfortunatly in the middle of the week i dropped the fan on her AGAIN, and she broke and also lost a topside. Once again, the plant didn't seem to mind, it happened during dark period so its not caught on camera, you can barely tell when it happened on the timelapse. I leaftucked and LST'd almost every day of the week, you can see this on the timelapse, too She got moved into the flowering tent this week. hope you join me for flower! My Flower lights: https://marshydro.eu/products/mars-hydro-ts-1000-led-grow-light/?ref=BelgianBudtender My Veg lights: https://marshydro.eu/products/mars-hydro-ts-600-led-grow-light/?ref=BelgianBudtender Coupon code BelgianBudtender for 3% off
Likes
Comments
Share
Likes
12
Share
@Froggman
Follow
Gave her water last night and plan for shut her down sometime this week. Today is day 84 from when she sprouted.
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
5
Share
7/15/25 plant is giant. Been purpling since pretty early on. Fed her for the last time. 3tsp roots organics bloom booster, 2tsp microbe charge, 2 tsp uprising foundation
Likes
2
Share
@EyeMKing
Follow
In less than 48 hrs of being in a room temp water bottle in a dark area tap roots already started coming out.
Likes
6
Share
@k0nz1
Follow
Already there 5 days till harvest No more watering - let them dry out in the pot Hervested after 10 weeks bloom
Likes
29
Share
Stretchy mguee over here... stems have yet to harden to my liking, removed all lowers and supercropped to see if that helps. Girls are looking stunning, first round with the cropsalt nothing else PH 5.8, no fluctuations, DTW. It been a slow transition to flower but this could also be due to flippin’ early, in a weeks time when I see more pistils and flower development I’ll be switching over to Bloom nutes. Temps/RH are on point 80/60 has been my range for this one. Stay Safe Stay Fresh GHL
Likes
40
Share
Week 15 - unstoppable growth! My measuring stick is at its end. It only reaches 180cm and we are above that. It's getting hard to reach and prune the top but I'm not giving up. Temp is stable, humidity at a nice level, lots of sunshine. This summer is really something. But we had a huge storm. Nothing a little tape cant fix. One of the early branches broke off, but my net caught it and with a little tape it's as good as new
Processing
Likes
1
Share
@KAFA1500
Follow
I started using fertilizer. I use biobizz grow, fish-mix and alg-a-mic. I water it 2 or 3 times a week, adding the amount of fertilizer I specified in 1 liter of water each time. Huge difference for last week. I think I'm progressing well
Likes
22
Share
@BruWeed
Follow
☘️25/10 - Empieza su segunda semana en Etapa de crecimiento. ☘️Por el momento su desarrollo viene bien sin ningún problema. ☘️Voy a dejar que tenga tres semanas en etapa de Vegetación para ya poder ponerla en flora. ☘️En estos días seguiré subiendo más imágenes de como viene su crecimiento.
Likes
11
Share
Week 3 Veg. These ladies are looking heathy as can be, Very satisfied with the genetics so far!
Likes
4
Share
@pzwags420
Follow
week 3 flower is going great. I increased my UVA lights to 8 hrs on. Gsc and Blueberry have decent bud-lets already on day 17. OG kush has preflowers. waiting on Blueberry muffin to show pre fowers should be soon. At the end of week 3 GSC and Blueberry are doing the best and starting to get more trichomes. Im waiting on OG kush And Blueberry Muffin to really get going!
Likes
9
Share
@Wenz004
Follow
Experiment explanation see week1 was able to stop the expansion of CaMg deficiency by increasing the ph to 6.4...currently give this: Plagron sugar royal 1 ml/l Plagron power buds 1 ml/l Plagron alga bloom 4 ml/l Plagron green sensation 1 ml/l Aptus regulator 3 drops/l Aptus CaMg booster 0.7 ml/l Drinks appr. 2 litre per day at the moment...nutrified
Likes
216
Share
Week 2. Colorado Cookies in Mr.B's So it's taking a heck of a long time to dry, but as you can see i'm using the hygrometer method to dertermine when to water, it says moist so it's moist and it's gonna have to wait until dry for me to water it. basically i've not watered since last week tuesday ! waiting for the next watering so i can top off the pot with some peat, overwatering compacted the soil already, kinda disappointed i've already made such a critical mistake, but hopefully sticking with it and following her cycle will help. Will try to get an in soil ppm reading asap. Took a few vids of the amino spray which is for the soil, and the kelp and micro sprat which goes directly on the leaves. beyond that what i can say is i got three identical phenos so far in the colorado cookies pack, all three plants are real even, shot up healthy then started making nodes i'm at 3 full nodes, gonna wait for 5 but i dont think i'm gonna top, something about the cookie heritage tells me it wont like getting topped much lol vpd since last week 0.6-8, now slowly getting to 0.8-1.1
Likes
15
Share
June 9th notice yellow at bottom sprout Ieaf
Likes
9
Share
@Headies
Follow
So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.
Likes
13
Share
Her buds are getting really nice and plump. I'm doing trichome checks every other day or so. Only seeing amber on the sugar leaves
Processing
Likes
42
Share
Week 6 beginning here and it seems that this will be definitely the best plant from the first wave of plants that I ever grew in my whole life. She looks healthy and keeps growing a lot. Last week I've started an LST training, and for this week I had to put a scrog on the tent because I have a short tent and I don't want to give a chance to the LED panel to burn the buds. I'm trying to stick with the minimum distance of 75cm from the top of the plant. Let's see what will happen.