2/3 of the plants are starting to fade. Middle pheno is showing deficiencies. It’s a toss up between pheno 1 and 3 . And a strong question about whether I want to keep this strain going. Robinhood Seeds, you have disappointed me greatly.

Very difficult plant to grow but I'm happy with 162g off this plant

The Gorilla Cookies are still doing alright, but 2 of 3 are showing some lockout or deficiencies. Despite this they are still doing ok. The one that doesn’t have this issue is doing great, getting fat and greasy! They are starting to stink up my house, had to turn the fan off Auto and just keep it running non stop otherwise my entire house smells like the good good 😊 I’m not super concerned, I checked the runoff, and it wasn’t too out of wack, 6.4 ph… the leaves look like they are having some serious P and K deficiencies, but I don’t want to feed anymore as we are approaching the end of their cycle fast, and they are continuing to develop, just not as good as they could have. RH was lowered, and temps have been consistent 77-79 degrees. Watering now approx. 3 litres every 4-5 days but I expect this to slow down soon. Happy Gardening 👊🇨🇦❤️🌱

Flowering week 2 begins for Super Lemon Haze. She grew about two inches in height, a little bit of stretching and her foliage filled in nicely from last week's defoliation. Hopefully this week we will see some more stretch and bud sites developing. Thanks for checking out my grow 👽🌳

I've switched on also the bloom light on my lamp but I've kept the light schedule (will change next week or so). 😊

Well they reacted really well to latest lst and it really worked in helping get as much light as possible to as much as the plant as possible not long now before I flip them into flower roll on next week

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

1.7.2k24 Power roots Alga Bloom Plagron PK 13-14

The buds are dense,fat & frosty 😋 Some purple color😈 Trichomes 10-20% amber🔬 The smell is DIVINE! Cookie & eucalyptus🍪❄️Super fresh👌

All the late nights and hard work are starting to show signs of paying off. Got high hopes for this grow

These are last week photo. I forgot to update her. She’s so healthy. Her buds look dense and bigger every day.😍

Hi everyone :-) She grows beautifully :-) This week she was given Canna Vega for the first time :-). This week I will start topping, next week with LST :-) I wish you all a nice week, stay healthy 🙏🏻 and let it grow 👍

I'm going to feed some high nitrogen fish emulsion, I feel like she's way too nitrogen deficient

Ok this was my first grow and I made mistakes. -forgot to buffer coco - nutrient burn -started the manlining to early - probably worried to much about every stage these plants. -ended up with fungus gnats And probably appt more I can’t rmeber in the moment. But i learned so much from all of my mistakes and spent so much time researching and seeing in real time how these plants react and grow. I did do some experimentation just a normal top with one blue dream. I topped twice one another blue dream and did a 3 times topped on all the blue dreams and I see why you should at least top three times the eight main colas and spread out the plant I see some of the buds on the one I only topped once not matured at all because there was minimal light other buds were growing so fat it suffocated it basically. I could have probably defoliated and manliness better but ayy. Beginners wil make Mistakes and I’m happy with what came out of these girls. Not excited for trim hail but I am at the same time 😅😅

After week 2 the two Barbarian (=AK-47 x Barabara Bud) plants were transplanted into their final container, a plastic pot with 11 liter of soil (light-mix) in it. Now the roots can continue to develop rapidly and the plant growth is amazingly fast. At day 18 the plants are almost 20 cm tall already and look VERY healthy as you can see in the videos.

Today I top dressed everyone with a full strength feed of nature’s pride bloom, compost, added bacteria, kelzyme calcium and a handful of promix. This will be the last feeding for both the blackberry breaths. It looks like everyone else is going to go 9-10 weeks so they will get 1 more feeding. Either way I’m going to harvest everything at once so the bbb’s are going to get extra ripe. The frost on the one pheno is insane. Smells are amazing so far too. Will report smell after drying. I just grabbed a full organic nutrient line for use in my next run. I got more of the nature’s pride veg and bloom dry amendments, boogie brew tea, kelzyme xx calcium, EM1 microbes and method 1pps spray. I will also be using Alaska fish emulsion (5-1-1) worm castings, WOW mycorrhizae and a pre inoculated 50/50 coco promix blend. Seeds came in!!! They hooked it up fat too. I got the 12 dolato seeds I ordered plus Slurricane F1 x6 and puro loco x6. The puro locos are going to be used for outdoor and I might do a little pheno hunt of the slurricane this year. The F1 is supposed to be better or more likely to show genes from both parents. Can’t wait! So today I forgot to water and it really looks like it shocked them... they all drooped like crazy and yellowed out more. I got them all watered and raised the light to ease some of the stress. Worst time possible to forget a watering!!! Won’t let it happen again. I was reading that PPFD levels over 1000 require added co2 and my light is well above 1000 at 8”. That could also be another reason my plants yellowed out so quickly. Next round I’m going to up the nutes and get one of those bottles of co2 and see if they make a difference. I would have to keep my filter on a timer so it wouldn’t deplete so fast. Or just use it for the parts of my grow that doesn’t need a filter. I didn’t even need the filter until week 3-4 of flower. I cleaned the sock on my carbon filter and now it’s just sucking the life out of my tent. The humidity went from being too high to being too low. Going to lower the speed until the humidity is proper. This tent isn’t that old and that filter sock was disgusting. Going to try stablizing my RO water with a bit of snow in the winter and rain in the summer

Hey farmers, loads of growth this week, still no signs of flower, which is good! My plant is getting quite big, I'm considering lollipopping her, I might take off some lower growth once I see signs of flower, just to make sure I have nice firm buds and not a bush of larfy buds, I know the general rule of thumb with Autoflowers is to not cut anything off, we'll see how it goes. There was a heatwave in europe, as a result this plant got a little hot, and I had to supplement ice and insulate the bucket. She made it through 40 degree weather just fine, however. Later In this weeks timelapse my camera fell down, when picking it up i noticed the lens was covered in trichomes from my last grow, I cleaned it so next weeks timelapse should be less blurry, lol.

She has been a beast and very easy so far. She does like it warm at least 80 and she happy. Using her as a mother plant to gets some clones.