Likes
15
Share
@Lazuli
Follow
Tangie 1 is flowering Tangie 2 starts flowering Blue dream is still in pre flower
Likes
14
Share
Have lost momentum with this little one, not gonna lie! Seeing her next to the same cultivar doing way better (no surprise) is a bit of a bummer haha! That being said, her bud looks more compact already, and more colourful. The proof is in the pudding anyway, and I look forward to sampling 😌
Likes
15
Share
@AllieO
Follow
1/12: impatiently waiting for lemon auto to finish up. Still not sure what the northern lights is trying to do, but..the little buds are slowly growing. S l o w l y... 1/14: things are getting out of hand in here. Northern lights is bushy AF again but the budlets appear to be increasing in size. Lemon is getting closer every day. Looks like I've got milky trichomes and the pistils are darkening. Still a bit early, but I'd be lying if I wasn't anxious for the space.. 1/15: I've accepted that I have at least a week ish left on Lemon auto,but she's getting there! I did some rather risky defoliation on northern lights and holy shit, she's got potential. I'm hoping she's just a slow grower and those buds will really fatten up! Perhaps lemon is just a really fast growing plant? I've also decided that since space is limited, my best bet is to probably rotate the plants every other day to allow all bid sites an opportunity for direct light. I'm reigning myself in. Once lemon auto is harvested I need to NOT immediately plant another. I've got some mephosito seeds I want to get going, but I've learned my lesson. This tent fits two 5 gallon mature plants... Uncomfortably. Three is too many 😂 1/17: wondering if northern lights has is it her to fatten up. Gave her a good flush &feed. Popcorn buds or not, I'm invested (#forscience). Lemon auto is still finishing up. Can't get good enough pics with phone to see trichomes. Clearly, I have a minimum of a week left, but I got a digital microscope so I can keep track! Should be here for next update.
Likes
7
Share
Autos transferred to 1gl pots.. Looking good so far.. Going into 4 weeks and soon ready for LST. 🌱🎋
Processing
Likes
26
Share
@GrowGuy97
Follow
Day 35, start of week 2 in flower, everything is going great so far✌️🏼🌱 Day 37 - All the ladies are looking great✌️🏼🌱 Day 38 - ladies got watered today, looking good & starting to put off a nice smell😍 Day 40 - Still have a lot of yellowing leaves towards the bottom of almost all the plants can’t figure out exactly what’s wrong😅😅
Likes
45
Share
New week. 55-65 DLi. I am that, I am. Dodecahedron is the only platonic solid that has infite numerical pathways, (γνῶσις, gnōsis, f.)
Processing
Likes
21
Share
🤙Everything goes according to plan. Blueberries show a confident growth and filling of space with green ☘️ ▪️I water every other day through a powerful sprayer with clean water 💦 without fertilizers ▪️My close landing technique in action took only 2 week, and we have 18 major growth tips on almost the same plane ▪️the lamp is still 25cm from the tops, improved the cooler mount now it is exactly in the middle under the lamp ▪️the plants are tremendously strong and dynamically developing, in this regard, I worry about the fact that they will stretch overnight and touch the hot♨️ surface of the diode. update: 18 day installation of SCROG I use tents of the 🔸SecretJardin company version 4.0; they come with a stunningly comfortable SCROG; they are elastic and allow you to adjust the crown of the 🌱 plant by installing an additional staple
Likes
9
Share
@Kushizlez
Follow
Blackberry Breath #1 Yield: 57.5 Smell: 9/10 - sweet, grape, berry, gassy, earthy, hashy Bag appeal: 8.5/10 - dense, sparkly buds Crystal coverage: 9/10 - super impressed Ash: 5/10 - flaky, mostly grey/blackish Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - tastes like chalky shit High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes like shit, burns like shit. 46.5/70 = 66% 👎🗑️ Blackberry Breath #2 Yield: 76.1g Smell: 6/10 - musky, tea, berry, herbal Bag appeal: 8/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 5/10 - flaky, mostly grey/black Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - taste is shit High: 6/10 - indica dom Comment: looks nice, smells shitty, tastes shitty, burns like shit. 41.5/70 = 59% 👎🗑️
Likes
27
Share
New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!
Likes
4
Share
Likes
8
Share
@FairyFarm
Follow
The banana mango must be on roids! It’s doubled the size Of the others. If you are looking for a desert plant that handles 100plus F without being bothered - this could be your gal!
Likes
4
Share
Likes
11
Share
@BruWeed
Follow
🍀21/07 - Ya se encuentra en etapa de secado. 🍀El lunes le agregue 30L de agua y 10ml de Top Wash. 🍀Esta planta se encuentra mas resinosa y densa que la otra que también cultive. 🍀Todo fue perfecto desde el momento uno, no tuvo ningún problema en toda su etapa de vida. 🍀Tiene mucho olor, a caramelo o crema, todos sus cocos son densos y gordos. 🍀En total dio 163g. 🍀En estos días seguiré subiendo mas imágenes de como viene. 😶‍🌫️🇦🇷🍀Podes seguirme en Insta gram como @bruweed_arg🍀😶‍🌫️🇦🇷
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
2
Share
Leaf scaring getting worse but seems to have stopped progressing. Buds look amazing and can't complain about tricome production.
Likes
27
Share
@Dunk_Junk
Follow
She's grown 18cm this week! Entered flowering too. Looking lovely!!! Very cute. A mini weed plant 😂 😍