So here we are for this 13th week. The beauty...and the beast 😅. By the way, even on the 360° due to the video compression you can't really see the horror, so I've put you some pictures from my cell phone (bad quality though) but you can't missed it .😏

DAY 14 VEG. Hi growmies. I hope the green gods have been present in your grows this week. It has been a fairly good week for some of the girls this week but the tiny little Mexican airline had me convinced it would give in. Thankfully she hasn't and has now started to really begin growing with some healthy looking new growth pushing through in the last few days. Similar with the Strawberry Pie #2 and her toxic shocked look , she has got over the soils strength ow j think and begun to form normal leaves without the twist and darker colour ( clear sign of not liking something!) All of the plants have settled in fully now and the soil has started to work its magic hopefully. Trying to get the water cycle on point is the next task with it. I have been using 10L watering sessions to get it moist and will use a cheap soil probe to check the bottom for waterlogging . Next watering I will add the biosys tea again to support the soil life. The amendments should have all broken down nicely now so it is just watering from here in in hopefully. With ising 1 bed for 3 plants , I will be watching for the leaf green shade lightening , especially in flowering , and if needed use Megacrop as an additional feed. At this point it looks like the Strawberry Pie #1 and six Shooter #2 are leading the field but I get the feeling this light will help even that race quick sharp. I have now put it to 100% power as I do think these ladies will go for it this week now. No decision on the training yet but in will let their growth guide that one . Well thsts about it for this one as not too much happening yet. Enjoy the video and any comments more than welcome. Be safe and well Growmies. God bless. TIP SPREADING I am using a method I learnt about a while back called tip spreading. It is a very simple process but can be very helpful if trying to control height in minutes spaces. It can also help to lessen the gap lengths between nodes on leggy strains. It is by no means a guarantee that the tall sativas will become bonsai bushes by a long shot but it does help to shorten the gaps there too. It is done while the plants are in veg and as each new pair of leaves form on the grow tips , we gently open them out so that the new emerging below gets light to it . This will encourage it to grow out quicker than waiting until the previous node has gone through the slower process of opening naturally. We are essentially rushing their growth for them. They are very delicate at this stage so it is a gentle process that must be done with a lot of caution and a slow pace. Hopefully the video will help and the effects will be shown during the growth over the next few days/weeks. Be safe growmies.

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

I didn't feed again this week due to it being the same nutrients. My ec was running 3.9 so I added just regular ro water to get it closer to 2.4ec.

Into flower now on a 12/12, looking forward to some bud growth.

Her smell is super pure and fruity I love growing organically,this strain no matter if the phenotype is purple or green has a very intense and powerful mango aroma, I'll never get tired of growing this strain man! Love it! 💚

2020-07-12 New week, same nutrients. I've been carefully monitoring nutrient intake and topping up plant 1 quite often, almost a gallon a day now. The 2nd plant is growing slower and eating a bit less but it's also a week behind developmentally. Plant 1 is happy with EC=1600 and I dilute that down to EC=1400 for plant 02. Plants are looking good! 2020-07-18 Last day of the week. Plant 01 is completely insane. It is so tall that I keep having to supercrop the top as more colas try to hit the light. I obviously let it veg for way too long but I struggled early on with nutrition so I didn't know what would happen when I finally dialed everything in!!! I am gonna take them to the end, I just hope I don't have to cut any colas off that become unmanageable. I have to be way more aggressive with my LST next time. Very very light nutrient burn on plant 2. Still running EC=1600 and EC=1400 for plant 1/2.

Looking good. Couple weeks left!

another uneventful week. the girl is still creating nodes like crazy ... she is growing sideways rather than rushing for the lights. i raised the lights higher to about 12" from the top of the leaves. i also changed the nutrients from a seedling recipe to an early growth stage recipe that is richer in nitrogen with a higher ec 1.2. i also got to see the roots for the first time, they are looking really nice - white and fuzzy. i made the main nutrient tank more permanent and relocated the used nutrient and fresh nutrient tanks in their own chamber so, it's even easier to do manual nutrient changes (1 container in and 1 container out sort thing). later on, in the week, i noticed the main roots showing a little discoloration, not sure if i should be concerned about this, but she looks healthy.. it was fun using the doser again as i really hate mixing chem's since my days in chemistry labs. looking forward to new aggressive growth this week.

Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++

The plants LOOK good, but I made a big mistake when LSTing the plants, and some leaves got cuts, and 1 branch on both of the plants snapped off entirely :( I stopped LST entirely for the time being. Am considering getting another 1000w (132w actual) led identical to my current one. Growing in a 2x2 shower so I'm still 70 actual watts under what I should have based on the 50x area rule. Thoughts? They seem to be bouncing back well, though I'm definitely keeping a close eye on them. I started adding nutes last week (1/3 of recommended quantity) and everything seems to be looking good -- I noticed that growth significantly expanded, and there doesn't appear to be any negative side effects. I upped it to half the recommended dose today. Fingers crossed! It looks to me like plant #2 might be starting to flower, and maybe even plant #1 as well. Can anyone see what I'm talking about and let me know? Much obliged!

She’s not drinking as much, so need to tone it down. Moving her to the center of the tent to finish up. Guessing 1-2 more weeks You def get a melon funk for sure— that’s rare with seeds/names lately. 🏻💚

Day 57 -

👉Alrighty Then👈 77 days in flipped at 28 days 👉Went on Vacation 👈Came back to few that are top heavy 👌 had to do some tie ups and downs ..... It's been a great week all plants are killing it ......... 👉we are now in full flowering 👈 👉So I topped all but Babba Kush and Slurricane they didn't require it ... 👌 Got some nice level tops 👌 I've now started lowering there full flowering nutrients program , so we are set to go ...... up to the flush 😳 Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

All going great and fortunately the weathers not too bad either

Flush Week !! More yellowing and colder tempereatures... Feeding is 1 irrigation plain water, and the next with 2-3 ml Top Candy, giving the plant the Carbohydrates it needs, but no more nutrients this week. Eating way less water than before. Aprox 1 week until harvest, and the end of the next week probably is going to be sunny. So not much more to say fellas, sooo as usual, Take care and Good VIbes !!!

01/09/2022 Finally time to flower, and all girls went into flower room at lights out.The males will be next week, don't want to put them in to early so I will carefully check every day and separate before they open their flowers. I'm guessing week 3-4 I Will select two branches on each female to selectively pollinate. 01/11/2022 Blue Matter #5 (update #5 culled male) repotted with lemon og seed Will continue in her own evolving diary. My hope is to eventually graft different cuts for a multiple variety mom plant, I can have 6 total plants And would be nice to be able to maintain only one mom.