It's too hot, I had to switch my hps to 400w -------------------------------------------------------- Grow Room: trafika urban hydroponics 100x100x200 cm Lamp: kit trafika urban hydroponics ballast & lampe HPS : 250-600w Extractor & carbon filter : Mars hydro 6 inch 402 CFM ( power 3/10 ) Soil : 20% perlite, 20% vermiculite, 60% universal soil Average daily temperature & humidity : 24-30°C 40-60% Average nigth temperature & humidity : 14-22°C & 50-70 %

All caught up with the old diaries and can finally start focusing on the new grow... and it´s been smooth sailing so far! 😎 Waiting on a few supplies to make some upgrades to the ventilation of the tent, but nothing critical.. 😉 Lights at 30% for 24h until cotyledons opened and switched to 18h/6h reducing the distance from 100 to 80 cm. 😊 Weather is changing... temps are fine but I´m keeping an eye on humidity levels, turning the humidifier on and off according with the light schedule to stabilize it at 70%. Averaging for the week 22,6ºC and 69,7% 😍 Lets go! ✊

Looking good to me so far

Day 88. Amazing girl. Trim jail was easy, but she needed few more weeks to properly finish even so high lolipoped colas. Sugar leave trim left for butter and freezed , the rest of foliage and trim goes for bubble hash. Day 98. 92 g went for curing Happy Growing !

Die anfangs kleinste Pflanze und fast für ToD erklärt, ist jetzt die höchste. leider werde ich die krüppelige wohl entfernen müssen, sieht nach Zwitter aus, laut Meinungen aus den Foren soll ich sie lieber killen. Dann haben wir nur noch zwei im rennen.

Queste 3 apricot profumano tantissimo...... Deliziose

08/10/22 watered with Recharge. Welcome to motel 6 More ladybug porno. Now have yellow ladybugs 8/14/22 this plant is a magnet for ladybugs 🐞

I'm getting impatient now. Gave her a light P burn with a extra feed of PK at the end of last week and have dropped Boost entirely. Fade came on faster than expected but I think that's the Boost making her hungry, leaving no doubt in my mind it's a PGR. Dammit. Two more weeks??

Bonjour les amis. Cette semaine les fleurs ont pris du volume et surtout l'odeur est est nettement plus forte. Dès que j'ouvre mon placard une odeur terrible se répand. Ma femme est terrifiée. C'est la dernière semaine théorique mais il faut encore quelques jours, je pense récolter la semaine prochaine. Les 2 grandes plantes ont une forme et un volume normal, je vais les libérer de leurs liens très rapidement. La petite semble encore plus chargée en résine. Je n’arrose que à l'eau pH ~6.8. Led 80%. Bon grow à tous. M.

Apollo F1 had to come down due to bud rot. These videos were taken n June 10 and at that time no bud rot was visible. We've had so much rain this spring season with limited fully sunny days. I harvested June 14. The main cola was full of bud rot. That's how fast it can spread.

I can not believe.😲 We have reached the end of another magnificent journey made together on this splendid platform which gives ease and opportunity to learn and perform in the best crops I can already tell you that this baked tent is one of the best weeds I have ever grown so far! But this can also be seen from the contents. Spectacular colors, solid gems....and resin in rivers Stay updated for the white smoke 😋😎

I am dropping a Grand Daddy Purple auto. I scuffed both seeds ends. I dropped it in water. It will stay there for 24 to 48 hours until a tap root shows. I will then drop it in coco, and dome till it sprouts. Thank you ILGM, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

This week was busy.. feeding, training, defoliation, trying to figure out how I was going to handle the branches now that they're outside of the bag. This is what happens when you wing it. Worked out well though!

My Gorilla Cookies seedling is looking healthy with its deep, dark green leaves. I've been gradually increasing the light intensity over the past few days, which is crucial for autoflowers at this stage. It's definitely time to ramp up the light now, and I'm excited to see how it responds It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.

Die buds von der Cheese sind schön in die Breite gegangen ich finde die Cheese riecht auch sehr lecker

Hi guys,i have some news for you and of course we are celebrating 👻🎃 1)Now the lamp works at 50% plus we are testing the sunset/dawn function. In fact, it simply reduces the power by 25% two hours before turning off and the same with turning on. I don’t know what this will give us, but the understanding that we are closer to nature warms the soul☺️. 2) It turned out that all the time I pour increased psh 6.4-6.8. The point here is that I prepare the compote in advance, respectively, I also lower the psh in advance, and for some reason in my sick head I was completely confident that Plagron ph down would keep the psh at the value I needed, but I was wrong. (Now it’s worth thinking about which of us is still down). Because of this jamb, we have a couple of unpleasant things, the first and most unpleasant thing is a delay in development, as well as all sorts of dirty tricks on the sheets, which they kindly told me that I was doing something wrong. Photos are attached. 3) Changed the composition of the compote. StartUp was removed. It was replaced by the Plagron Coco a+b and Fish Force base.

Week 3 has just been wild there proper going for it

Diese Woche habe ich mir etwas einfallen lassen damit ich nicht nur Photos hinterlasse sondern auch etwas über mein System erklären kann. Letzte Woche Sonntag habe ich einige Plants getoppt und sie schauen soweit ganz gut aus. Ich hatte leider letzte Woche he ein Problem mit dem Root Juice von Advanced Nutrients die Nährlösung in den Tanks ist gekippt. Ich habe es erst am zweiten Tag gesehen und habe sofort alles geputzt und Wasser gewächselt. Danach wieder alles eingestellt und läuft. Ph: 5.7 Ec : 0.9 Ich habe auch jeweils 20g Mineral Magic in die Nährlösung hinzugefügt und 1 Teelöffel davon um den Stil der Plants gemacht. In meinen 2 Videos findet ihr mehr dazu. Happy Growing :)

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"