Sie hat super aufgeholt zu meinen anderen 2 Projekten und kann dann auch bald in den neuen großen Topf rein.

Hey everyone 🤗. This week it has taken up more and more of its fertilizer and has got a nice color. It also grows very well 👍. It was topped again this week. Otherwise everything will continue as before and will continue to be topped 👍. I wish you a lot Spas with the update, stay healthy and let it grow 👍🙏🏻 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 You can buy the fertilizer at https://www.greenbuzzliquids.com/ Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .

Day 63 - lookin good.... haha.... um, tanks stabilized, ph 5.8 - ppm 1200 .... she's feedin alot..... buds are fillin and lotsa white furries.... listed the nutes and amounts etc.., but i'm kinda feeding her as she needs.... so every few days she is drinking 2 lts +- and i'm just mixing up a neut solution in a 2 lt bottle every day or 2 ..... sometimes she just wants abit of water...... Day 64 +vid....shows her deep green and gloss... abit of crystalic :) Day 65 - vids pics.... trimmed her, and abit of bending.... Added blood and bone.... she's stretching alot, 60cm+ ........ Day 67 took all the early buds on all the stringy 0ff shoots.... Poor lighting vids, but don't want to mess with her flowering, :) 👍😎👊

2/2: Some of the huge fan leaves had to go. Not even the strongest of tucking would control them. Flowering is officially starting! Trying to rotate to get as much light to bud sites as possible. Excited to see where things go with this one. 2/5: determined that there was a bit of a light burn situation. Decided to pull her from the tens for a good flushing and then rearranged the tent a bit to keep her off to the side a bit. 2/7: she's a big girl. I have her flying solo in the tent for now..

Hi everyone 🤗. Everything is going great 👍. There are no defects or anything unusual :-). Today the Blue Cheese Pheno 1 became the first time rinsed, and now only gets 0.4 Ec water for the next 10 days ca :-). Everyone else needs a while. otherwise there is not much to report this week. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱

7/15 (Day 28)- Everything seems to be going well and everything is staying in check. I’ve been adding around 1 gallon of nutes ppm to 550 and ph 5.8 to res around every 12 hours. Having to defoliate some every couple days to unblock light. These are very short bushy girls. I’ve been doing some light LST as well, mainly just lightly bending some as I defoliate. Roots look nice, big and healthy. My humidity during the night is starting to be a concern. It’s getting high and my little dehumidifier is not doing much. Will monitor and continue update daily. 7/16 (Day 29)- Started off the day with a gallon of nutes to top off res, then did some light LST, just trying to figure out the best way to do that. Trying to keep them all even. They continue to grow like crazy and each day I have to pluck a few leaves here and there to open up some light for the newer smaller growths. Everything is in check, water and bite change in the morning. 7/17 (Day 30)- They continue their short, rapid, bushy growth. Flushed and added fresh water and nutes. PM to 500 and PH 5.8. Everything stays in check. 7/18 (Day 31)- Progress continues, did some more light defoliation and added another gallon of nutes to res. 7/19 (Day 32)- Things continue along. Didn’t do much today, just monitored and added a gallon in the morning and a little before lights off. 7/20 (Day 33)- Pretty much same as yesterday. Probably going to take another stab at some LST and light defoliation on Saturday. 7/21 (Day 34)- Same as previous two days. Just monitored and made sure everything was good, they are drinking about 2 gallons a day now. I also added a dehumidifier to the room, humidity at night was getting really high so we will see how this helps. Tomorrow starts a new week and I'm excited to see the timelapse tomorrow. As always, any tips or recommendations always welcome. Thanks for looking everyone! Happy growing!

Just some big fat nug towers

I started the GSC seeds from HSC by soaking in a glass of water overnight then planted in coco coir under a humidity dome in my veg tent. I will plant them in flower box in a couple weeks when they can handle the feed that my BB clone is on right now. On day 5 my 2 other Gsc seeds rotted perhaps too wet but I have one good remaining for this run. I started White widow seeds and will run 2 phenos. Gsc is looking good so far.

Day 29. No feed still. I spray them with Bio Heaven and CalMag light mix, sometimes adding a bit of Silica acid too. All not higher than 1ml/L. Think this week I will try to push best ones, smallest coming up too, but very slow, droped them to the shade and don't put any hopes into them. Day 33. Did little repositioning, space looks better now I think, plus big plants should be happier. Spray spray spray ;)))) Happy Growing !!!

Today is the start of week 6 !!! I currently running into problems here with my Obiwans I decided to bottom feed and that just turned into a disaster so I am doing what I have to in order to correct this minor problem . I've topped Obi #1 Im going to wait and see what happends with Obi#2 before i decide to top her got the pots raised with fans circulating air under them so it dries the medium faster if anyone can add suggestion feel free I'd like to make this as easy as possible lol

10/3/2022 is officially 1 week from germination. All three plants are looking good so far. The Orange Bubblegum continues to lag the other two, but it's growing. I just watered 1 liter per plant on 10/2 and the pots are still heavy, so all I've been doing is a slight misting to keep the top soil moist. Waiting for my barley straw to show up, so I can start building a mulch layer. On 10/4/2022 the top of the soil was dry about 1 to 2 inches deep, so I watered about 1 liter across all three plants, so about 1/3 liter per plant. The bags were still fairly heavy, so this was mainly to keep the top soul moist. I've always used bottle nutrients with a dry down period, but from what I've researched, you want to keep the living soil lightly moist. I'm a bit skeptical so we will see how it goes. Using very little water in these early stages to avoid suffocating the roots (hopefully 🤞). On 10/6/2022 the pots started getting lite, so I did a full water of 1 liter per pot, using ThermX 70 and Fish Shit. Everything still looks healthy. On 10/8/2022 I added my barley straw as a mulch layer. Also, add a little less than 1/4 cup ground gnarly barley from Build-a-soil, with some worm castings as a top dress. Lightly watered to moisten the straw and top dress. Hoping the straw will slow the drying of the top inch or two of soil and prevent the light misting I've been doing. Avg. VPD: .8 PPFD: 300 DLI: 20

Since sprouting above ground I've been top watering RO water until the roots hit the water. I also covered the net pots with reflective film to avoid any light leaking into the rdwc system to avoid any issues later on in the grow. Day 5 - Roots are starting to touch the water so I'm expecting the growth rate to pick up soon 😏 Trol master unit is set up and connected to my light at 40% and on a 18/6 lighting schedule. Very handy unit if I must say. Until the next update

30. Juni Pro Tag schluckt sie gerade gute 2-3l Wasser. Gießen ist zum Dauerfrostes geworden. Dafür brettert sich die Sonne gut drauf! Sind 30 Grad +, aber gute lichtverhältnisse. Schade dass ich dieses Mal kein Eisenspray benutzt habe.

Still got some slight burning of leaf tips more so on the right side of the tent. Otherwise, growth is good. Stratiolaelaps scimitus are now abundant in the soil. Pretty neat. GIBBERELLIN: Note: As gibberellic acid is not soluble in water you need to dissolve in alcohol first, Mixed 0.75g Gibberellic Acid 90% with 50ml of 99% Isoprponal alcohol , (Any alcohol will do but a higher % works better) also warmer alcohol helps dissolve the gibberellin. Mixed with 1000ml =1L of distilled water, bringing the concoction to 400ppm. 2000ml = 200ppm etc Every plant has a different threshold required to elicit a response, 400ppm is on the high end of the scale I've read to be careful with dosage as it's easy to over-apply, let's find out if it does anything like it described. Added bunch of enzymes, aminos, 5 or so different kelp. Can be kept for 1 week in the refrigerator. Nutrients for the week are recipe foliar application. The speaker (containing a 3 KHz signal and nature sounds) is played at high volume with high treble and medium bass for 10 minutes before spraying the plants. The plants are then sprayed while it's playing and the sound is continued for another 20 minutes after spraying. Both sides of the leaves should be saturated. Treatment is best performed early in the morning/daylight, preferably in foggy 65+RH% dew. On cold mornings, spraying should be delayed until late afternoon if outdoors. Do not spray plants when the temperature falls below 50o F. The formula also can be administered in the regular weather supply, by drip-feeding, hydroponics, etc.. The nutrient solution should be applied once somewhere in first 4 weeks, then twice weekly thereafter. https://biologydictionary.net/gibberellin/ Once a plant has sprouted past the surface of the soil, the endosperm is long gone. The plant must now rely on photosynthesis for food. However, the role of gibberellin does not stop at the seed. Gibberellin is responsible for many aspects of plant development. Further, plants produce many forms of gibberellin molecules, which act on different parts of the plant. In the image below, you can see the effects of a specific gibberellin applied to a plant. In number 1, no gibberellin was applied. Plants 2 and 3 both had gibberellins applied, with plant 3 receiving the highest dose. Gibberellin here encourages the plants to increase their internode length or the length between their leaves. In many plants, the regulation of gibberellin is an important natural process that regulates their height due to this process. At the cellular level, gibberellin is influencing the balance of proteins. In doing so, it encourages cell growth and elongation in the stems and between nodes. In some species of plants, gibberellin is involved in many more processes. These include flowering, fruiting, and senescence, or the natural death of leaves and other plant parts. Interestingly, many genes that regulate and adjust gibberellin levels are influenced by the temperature. Thus, when the temperature changes during seasonal change, the plants react to this as gibberellin levels change. This starts off many processes such as flowering and fruiting. Gibberellin molecules are involved with and interact with other plant hormones. The auxin level, for example, is directly related to the gibberellin level, and the two complement each other. Ethylene, on the other hand, tends to degrade gibberellin levels. Plants use these hormones, which respond to different inputs, to balance and react to inputs from the environment. These inputs signal various environmental conditions, which the plant is keen to take advantage of. Gibberellin Structure Gibberellin molecules of different types are synthesized in many different parts of the plant. Currently, there are over 100 uniquely identifiable gibberellin molecules. These molecules are synthesized in many cells of the plant, but tend to be concentrated in the roots. This is different from auxin, which tends to concentrate at the apex. Gibberellin is a diterpenoid, which is a familiar and highly represented molecule in biochemistry. It forms the basis of molecules like Vitamin A and Vitamin E. Seen below is Gibberellin A1, which was the first identified gibberellin. Other gibberellins have the same basic structure, but have various side groups attached. These groups affect where and how the gibberellin acts, which is how gibberellin can have so many diverse and unique functions in different tissues

Muy linda estructura, no me aguante de subirles un video, queria compartirlo con uds aunque signifique un riesgo acá en mi país. Fuerte dosis de alimento para esta bella Fast Versión. Very nice structure, I can not wait to upload a video, I wanted to share it with you even if it means a risk here in my country. Strong dose of food for this beautiful Fast Version.

As you can see this baby decided to top herself, we were a little worried that she wouldn’t choose life but she had the will and has survived! The lower branches have taken over and she will provide us with her love. The ones that fight the hardest always seem to be special and we are very excited to see what secrets she has to share with us! I myself, am in love!

Day 56 - Rinsed with Botanicare Clearex solution. Day 58 - 2 Days after the rinse and the buds are fattening nicely. The pots are still too wet to water so I'll patiently wait to introduce the new Fox Farms Bembe and Cha Ching.

Alaskan purple auto is growing great under the Medic Grow mini Sun-2. She should start bulking very soon. I have not done much, but add a little solution or water at times. 🤞🏻 for some nice flowers to form. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻💪🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Another good run and another home run on this strain. Just everything about it is amazing. The smell, the look, the taste the high, all amazing. The scrog came out nicely and produced a fair amount of bud. One thing I would like to mention is I only flushed for one day. The dry time in the tent was 15 days as it was quite humid here but a nice slow dry is alright with me!!! This harvest report is after 2 weeks of daily burping. So about a month, maybe little more from harvest. I can say I definately agree with the old timers that the flsuh is not important its the dry and cure. She is super smooth and tastes great already with little cure. The ash is also nice and white!! skip the flush but slow down drying is my thoughts for the future. after 2 weeks of burping in the big jar I move them to 20ish gram jars for the remainder of their curing time. As far as weight goes, I was a little off on my guess, I think I guessed 122 but 92 isnt all that bad. The tent harvest was mid 500's but a couple of the other strains from a different breeder really slacked on the weight so overall I'm happy. More and most imortant is all the flower in the tent is top notch thats for sure. Thanks for following peeps, on to the next run!!!! PS. Barneys genetics is damn amazing! 😈