FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Here we are at the start of week 11 from seed Start of week 7 of flowering for rhino number 1 and the start of week 4 of flowering for rhino number 2 White Russian has been chopped down on day 72 hang and dried for 4 days and trim and jared wet weight was 30 grams after drying it was down to 6 grams . Which is totally okay personal stash smells like fucking pine barrens and shit. Rhino number 1 is getting close we can see some of the branches are finishing up sooner then others !! So far everything been smooth !!! Update around day 80 from seed i grabbed a couple lower branches and boy does this bud look fucking frosty !!! Really amazed by the results still growing and packing strong rhino Ryder has been nothing but easy to grow :).. Can't wait to test it it out I am drying in my closet and humidty between 50 and 55 and temps 69 and 70 I am very pleased with that tbh most closets are 30% and stuff going be a nice harvest chop day is this Friday she's been fading out beautiful as well !! On her second week flush .

lil be hide put in the work thought id share with you guys the 30 min ride 20 min walk boy im glad the hard works be hide me time to sit back and injoy the sunshine sound of water i love this beautiful

All good. Removed some leaves. Getting stinky and minty

🌱 Week 3 | Purple Haze Photo | Folder 7A | Building the Foundation, One Leaf at a Time Welcome back to another chapter of Project Blue, where every Purple Haze phenotype receives its own dedicated GrowDiaries report. Although these plants all come from the same genetic line and are growing under identical conditions, each individual expresses its own personality, structure, and growth rhythm. That is exactly why these diaries exist. Some growers only document a room. I wanted to document every plant. Each report is completely self-contained, allowing anyone who discovers this diary to understand the entire project without needing to read the previous folders. Like every plant in Project Blue, Purple Haze 7A is being cultivated using my favourite 12/12 From Seed technique. From the moment she broke through the soil, she has lived under a 12-hour flowering photoperiod, encouraging compact growth, tight internodal spacing, and allowing each phenotype to reveal its natural characteristics while remaining perfectly manageable inside the grow room. Even though we’re only entering Week 3, this little lady has already shown remarkable progress. Looking back at the first photographs of the week compared with the final ones, the transformation is easy to appreciate. She began the week looking modest and compact, but by the end she had developed into a beautifully structured young plant with noticeably stronger branching and a much fuller canopy. Sometimes the biggest progress isn’t measured in height—it’s measured in structure. ⸻ 🌡️ Week 3 Growing Environment Consistency remains one of the most important ingredients in every successful grow. Throughout the week the environment remained stable: • 🌡️ Day Temperature: 27°C • 🌙 Night Temperature: 25°C • 💧 Relative Humidity: 55% • 🌱 Root Zone Temperature: 21°C • 🚰 Nutrient Solution Temperature: 20°C • ⚖️ pH: 6.0 • ⚡ EC: 1.3 • 🌬️ CO₂: approximately 666 ppm • 💡 Photoperiod: 12 Hours ON / 12 Hours OFF • ☀️ Average PPFD: 600–700 Stable environmental conditions allow the plants to dedicate their energy to growth instead of constantly adapting to fluctuating temperatures or humidity levels. Healthy roots, consistent transpiration, and balanced metabolism all begin with a stable room. ⸻ 🌿 Feeding Schedule Purple Haze 7A continues receiving the complete Plagron Terra vegetative program: • Terra Grow — 1.8 ml/L • Power Roots — 1 ml/L • Pure Zym — 1 ml/L • Sugar Royal — 1 ml/L At this stage I still prefer a conservative feeding strategy. Rather than pushing maximum growth, my objective is to build a healthy root system, strengthen the stems, and encourage vigorous but controlled vegetative development before flowering accelerates naturally. A healthy plant never needs to be rushed. ⸻ 🍃 Leaf Tucking Before Leaf Cutting One of the biggest changes throughout this week wasn’t caused by nutrients or lighting—it came from simple canopy management. Rather than removing fan leaves, I continued practicing leaf tucking, gently repositioning the larger leaves beneath developing branches whenever possible. This simple technique allows light to reach lower growth sites without sacrificing the plant’s solar panels. Those fan leaves are producing valuable energy every hour the lights are on, so if they can be moved instead of removed, the plant keeps all of that photosynthetic power while the lower branches receive the light they need to grow. It’s a small adjustment that often produces surprisingly big results over time. ⸻ 🌱 Gentle Low Stress Training As the week progressed, Purple Haze 7A also became an excellent candidate for some very gentle Low Stress Training (LST). Rather than forcing the plant into shape, the objective is simply to guide her natural growth. By carefully opening the canopy and encouraging the developing side branches to receive equal exposure to the light, we’re already beginning to create a much more balanced structure for flowering. The difference between the beginning and end of the week is remarkable. Instead of one dominant growing tip, multiple future flowering sites are now waking up and preparing to compete for the canopy. Every day she becomes a little more symmetrical. Every day the structure becomes stronger. And every day she looks a little more prepared for what’s coming next. ⸻ 🌿 A Compact Plant With Big Potential Purple Haze 7A may still be one of the smaller plants in the room, but she has something I always appreciate—balance. Her internodal spacing remains tight. The stem is thickening nicely. The foliage displays a rich, healthy green colour. New growth is vibrant and full of energy, while the secondary branches continue to develop steadily beneath the canopy. She’s not trying to become the biggest plant. She’s quietly becoming one of the best-built. Very often, those are the plants that surprise you the most once flowering begins. ⸻ 🔭 Looking Ahead With another successful week behind her, Purple Haze 7A is entering the next stage with an increasingly well-organized structure and excellent overall health. The combination of stable environmental conditions, gentle LST, strategic leaf tucking, and balanced nutrition is beginning to pay dividends. Every adjustment this week has been made with one goal in mind: creating an even canopy that will maximize light distribution once flowering starts to accelerate. She’s still a compact young lady—but she’s no longer a tiny seedling. She’s becoming a very promising phenotype. Growers Love ad I can’t wait to see what she has planned for the weeks ahead.

.

Hey guys :-) A lot has happened this week :-). She has developed very well. Today it was topped on the main shoot for the first time. How often I will use topping on her, I make it dependent on how everyone else develops. I want to bloom soon so it won't happen very often :-). It was poured twice this week with 1 l each time (for nutrients, see table above). Fast plant spray from GBL was applied 2 times this week. New was added this week Fast Bud from GBL is preparing her for the coming flowering. Bio Grow Stay away for a while because the substrate is 30-50 % consists of fresh earth and the ladies are nice and dark green :-). Today there was another spray with neem oil against the remaining tripse which I will repeat one last time next week. As always, everything was cleaned and checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁Punch Pie: Un híbrido monstruoso con un 90% de dominancia índica, ocupa uno de los primeros puestos de la lista de favoritas de Kid Dynamite. La Punch Pie desciende de la Cherry Punch Pie de Tyson 2.0 y contiene la genética de dos índicas galardonadas: la Purple Punch y la Purple Kush. Punch Pie tu paladar se impregnará con ricas notas de pastel de frutos rojos, repostería caramelizada y tierra. Luego, pocos minutos después de la primera calada, sentirás todo el poder de este portento. La Punch Pie proporciona un combo 1-2 que se manifiesta justo en medio de los ojos y derrite todo el cuerpo, dejándote en un estado somnoliento, hambriento y apacible. Produce plantas compactas que alcanzan una altura de 80-110cm en interior y hasta 120-150cm en exterior. Tras 9 semanas de floración, esta señorita robusta crece con fuerza para soportar el peso de sus densas flores, y da cosechas de hasta 600g/m² en interior y 750g por planta en exterior bajo el sol. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS- 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%

Critical Mass CBD Auto #1: Our first lady has continued to develop beautifully! After overcoming some early transplant stress and slow growth, she has really settled into her 3.9-gallon fabric AutoPot. Her overall structure is noticeably bushier and fuller than her sister's, with plenty of established flowering sites throughout the canopy. We did observe some downward-facing foliage during this period, which initially had me a little concerned. However, the leaves remained firm and springy, and after making a few environmental adjustments, she began looking noticeably perkier! Her color has remained relatively consistent, and her developing flowers are beginning to take shape. Tent-Wide Updates: Week six has been all about maintaining stability and allowing these two Critical Mass CBD Autos to settle into flowering! Both plants are now fully established in their AutoPot systems, with the reservoir providing our primary nutrition through Ventana Plant Science. The AirDomes continue operating during the light cycle, and both containers are maintaining consistent moisture. One of our bigger adjustments was moving to an 18/6 lighting schedule. We had previously been running 20/4, but decided that a longer dark period might be beneficial as the plants progressed through flower. Since our primary goal is quality rather than maximum yield, I am perfectly happy giving these ladies a little extra rest! We also continued keeping our light intensity relatively conservative rather than pushing PPFD unnecessarily. Nutritionally, we gradually settled into a flower-focused Ventana Plant Science reservoir recipe. With #2 showing lighter foliage, I considered increasing nutrients or adding Cal-Mag, but ultimately decided against introducing unnecessary variables. Ventana Support already supplies calcium and magnesium, and I wanted to give the plants an opportunity to respond to a consistent feeding program. Our reservoir recipe during this period included: One Gallon of RO Water Ventana Plant Science Structure: 0.5 ml Ventana Plant Science FlaVUH: 1 ml Ventana Plant Science Flower: 3 ml Ventana Plant Science Expand: 0.5 ml Ventana Plant Science Support: 6 ml Target EC: approximately 0.95 Target pH: 5.7–5.8 We also introduced our first Stash Bloom application alongside Mammoth P, continuing the supplemental feeding approach we previously established with Stash Base and Blend. Rather than adding organic amendments to the AutoPot reservoir, I prepared a separate, diluted root-zone drench and applied it from above. Both plants received approximately 1.2 liters, after which I removed the runoff and cleaned their AutoPot trays. The plants responded well following the application and cleanup, with noticeably improved leaf posture and continued flower development. While I cannot say exactly which adjustment contributed to the improvement, I am happy with how both plants are looking! One thing I am really enjoying about this grow is observing how differently these two plants express themselves despite being the same strain. #1 has maintained a compact, bushy structure with larger developing flowers, while #2 has grown into a more open plant with numerous smaller flowering sites. Both are beginning to show some early resin development, and we are seeing plenty of fresh white pistils as the flowers continue to build. Outside of that, there has not been much aggressive intervention this week, and that's exactly how I want it! Moving forward, the goal remains simple: keep our environmental conditions stable, maintain consistent nutrition, avoid unnecessary stress, and allow these CBD autoflowers to develop at their own pace. Onward to bigger flowers and hopefully some beautiful CBD-rich medicine!

Aggiornamento 18/05/2026 la cream caramel che avevo cimato si sta riprendendo abbastanza bene per procedere con il main lining e oggi ho cimato anche una delle due panama red e somministrato 2ml/l di fish mix per aiutare le radici a svilupparsi meglio ho preferito non esagerare visto che il suolo lavevo gia pre caricato con guano e hummus.penso che a breve cimero anche le altre due bimbe per non far avere il sopravvento sulle altre

The pistils on all plants are getting more and more brown, its time to check the trichomes now. I check with a handheld microscope and they are getting milky, but not yet amber, which means they are ALMOST READY TO HARVEST, but not yet. The amount of crystals produced under the Q6W-Gen.2 LED-lamps from SANlight is astounding, the plants are coated in trichomes! This week I stopped giving any nutrients in order to FLUSH the plants, this is VERY IMPORTANT in order to get a smooth smoke of the dried end-product. The aroma of the plants is VERY STRONG NOW, they smell mouth-watering. The Shiva Skunk has a sweet, musky smell with a fresh citrus note to it, its a delight to smell those plants. The Serious Kush smells EXTREMELY fuely and gassy, like the OG-Kush, but with an amount of buds like the White Russian, its FLABBERGASTING. I cant wait to try those two strains...😎

Day 15 of flower. The girls are getting big and beautiful, have some preflowers forming everywhere. Will begin defoliating around day 25.

Bravo Genehtik! They did an awesome job with this strain! She has been extremely vigorous and resilient (only auto that didnt stunt from transplant) we began LST this week as she has enough spacing between nodes and strength to withstand the stress. I managed to get her main branch bent to almost 90° and exposed 90%of her branches( ones is stubbornly hiding 😡) without stopping this is the best I could do🤷‍♂️ She is also starting the very beginning of a stretch she is drinking a bit more and her lower stalk is hardening up.She also popped flowers, earning her a name officially! Ashoka will be this girls name from here on out! Stats: Vivosun 2x4 tent 1gal water pitcher Fox farms happy frog soil 2x viparspectra 600w refractive LEDs Durabreeze carbon filter 4" inline fan

Just keep watering as it drys. Supporting buds along the way that are getting too heavy. Smells like skunk and gas. Little fruit but not much. Trics still getting thick. Look forward to it finishing. Tricomes still cloudy. Little amber on sugar leaves but it's still going strong. Some leave fading finally to fall colors.

Great week for these girlies, they’re 6 days into transition and started to give me some real good stretching! They’ve got so many sturdy branches I’m hoping when flower triggers they go crazy and I’m very sure they will! Weed seed express continue to astonish me! There strains are so stable! Can’t wait to see her bloom 👊🏽💚

Having some bad issues with maybe a deficiency. Learning I need to examine my plants more closely more often!

7 weeks today and the plants are looking healthy. Only grew 2-3 inches this week so the vertical climb is slowly down fast but the buds are starting to swell. Fertilizing with cn flower granules once a week then big bloom, cal-mag, molasses, and stored rain water the rest of the time. Still warm here but nighttime slowly getting cooler and a cool front on the way. Probably another 3-4 weeks until harvest. Will check back later on. Thanks for stopping by. Decided to stagger harvests and drop a couple more beans. Wedding cake auto and Royal Jack have been germinated and waiting for them to sprout 8-26. Well I’m a genius. I thought I was using 5 gallon pots until I went to the nursery and bought some more pots. After filling up with soil and planting the seeds, I discovered the new ones are larger. Blonde moment. 9-2-25 gave them some big bloom, cal-mag, molasses in stored rainwater. Seem to be healthy. Stopped growing upwards and now fully dedicated to producing flowers. Starting to smell some but not overwhelming. Probably a few more weeks to harvest. Tricomes look cloudy but pistas are mostly white. 9-3-25 plants are very thirsty . They get saved rainwater everyday. I’m sure 24 hours of sunlight/grow light helps dry up the soil. Still hot here-90f+ but nights are close to 70f. Cooler weather soon 🙏🏻🙏🏻

4/20: I have 3 good clones of the shortie growing, and another FFT6 seedling. 5/1: The seedling is now in a 5 gallon pot outdoors, and 2 of the clones are in my closet getting ready to be transplanted into 5 gallon pots and moved outdoors. One of the FFT6 clones will be grown in my tiny tent. 5/6: I took the last two clones outdoors and fed them really well. I also did some training on the seedling and the clone in my tiny tent. 5/7: I did a foliar application of Axiom Harpin proteins today. 5/9-5/11: Did foliar feeding and lots of training every day. 5/12 - 5/17: Fed the outdoor girls on the 13th, then we had lots of rain all week. The seedling is a beast. Installed a new 200w 3000k waterproof LED over the outdoor plants. The indoor clone looks great. I gave her some water on the 16th. 5/18 - 5/19: The seedling and two clones outdoors are all flowering?!?! I suppose it's because I germ'd and vegged them for a month under 24/0 before taking them outdoors under 14/10 of daylight... I'm really hoping she sees the days getting longer and goes back to vegging. I need time to bush her up really well! I ordered another 200w 3000k waterproof LED to replace the two cool white 60w LED's, so that will be 550w total watts of lighting outdoors in addition to the 5'ish hours of direct sunlight they get at mid-day, and the tree-diffused sunlight they get for the rest of the day. Thinking about trying a product called Bud Bomb...has lots of hormones, cytokinins, and auxins that when applied at the beginning of flowering supposedly causes more lateral branching and less vertical stretch. As it is, I'm spending too much time training her and the other outdoor plants to stay below the eyeline of nosy neighbors, so I'm really considering giving it a shot... 5/20: I went for it and sprayed them with Bud Bomb this morning...hope it works like they claim.. 5/21 - 7/4: The clone i grew in the tiny tent got to move in under the quantum boards for her last 2 weeks and fattened up nicely. I harvested her on 6/28 and washed her buds, then jarred and weighed her on 7/3. She produced 110g of cola and 51g of lower bud...very little of it was larfy.👍 After a few great weeks flowering outdoors, i was invaded by spider mites and grasshoppers. The #6 seed-grown plant didn't make it, but i brought the #6 clone indoors and treated her for spider mites a few times, along with the 2 x #1 clones and the #7 plant. That outdoor clone now in my closet is still flowering as of 7/4, but had her last dose of nutes on 7/3. Flushing in a few days.

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 12/01/2020 - Fed her 1.5l of 6.6PH water with 0,2ml of each: Cal Mag (Atami), Grow, Bloom and Max, and 0,5ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/4 of the nutrient dosage on the chart, to achieve about 100/150PPM (500 scale). Now using the perfect PPM worsheet made by Grow Boss.

Auto Maxi Gom is doing well. She has produced her first pistils, and is transitioning into flowering. She should start stretching very soon. It's my first grow with Xpert Nutrients. So I am curious to see what happens. I had to back off on there amounts suggested. It was too strong. Nothing wrong with concentrated, it goes further once you figure it out. Everything is going well. Nothing else much to report. Thank you Medic Grow, Xpert Nutrients, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g