Likes
Comments
Share
@koci263
Follow
growing chem pie was amazing from start to finish, he made beautiful buds covered in resin. Every day it was wonderful to go and see how it blooms. during cultivation I came across two completely different phenotypes. One had rather more open but very firm buds, but the other was more like a crossbow and also firm buds. During drying, a little mold appeared on one of the bud, but otherwise everything is fine. after a month of curing, the taste of the smoke was very pronounced.
Likes
2
Share
First set of cutting got a bit of overwater change the container they were in n lef them outside n rain came n soaked dem .IYKYK fittest of the fittest will survive.. had to cut the mother's again earlier than I would want to jus to ensure we stay on track from the minor setback...also added gorilla #4 to the ship already cut her
Likes
26
Share
Day 36: "Hey everyone! Just a quick update: I removed a few more leaves here and there and did one last round of LST (low stress training). 🌿 The plants are looking great, and I'm going to let them recover now before sending them into the flowering stage. I'm really excited to see them start blooming in 2-3 weeks! Also, a quick update on our temperature issue: today, the temperature stayed below 26.8°C, which is great news! However, we still need to find a solution to keep the humidity levels up. Our 360 m³/h exhaust system isn't able to maintain the required humidity level. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated! Day 37: Hey everyone! Tomorrow, we're planning to buy some Cal-Mag because we suspect the yellowing leaves might be due to a calcium-magnesium deficiency. We're also going to get a pH test kit to make sure everything is balanced properly. Do you think this is a good idea? Any tips or suggestions would be greatly appreciated! Day 38: Hey everyone! Quick update: it turns out the yellowing leaves were due to a nitrogen deficiency. We increased the fertilizer dosage today, so the plants should start looking better in 4 to 5 days. 🌿 Thanks for all the support and suggestions Day 39: Hey everyone! Another quick update: after increasing the fertilizer yesterday to address the nitrogen deficiency, it should take about 4 to 5 days for the yellow leaves to turn green again. 🌿 We're already seeing improvements! The plants have grown significantly and are developing a dense canopy once more. It's great to see them bouncing back so quickly! Day 41: "Hey everyone! Quick update: we've removed the bands we were using for LST (low stress training) and are now letting the plants grow freely. 🌿 We plan to keep them in the vegetative phase for about one more week before transitioning them to the flowering phase. Excited to see how they continue to develop!"
Likes
13
Share
First day of week 7 Mimozz and Grandpa's Cookies are ready 😅 It's crazy how fast they developed. 😎 Two plants of Cherry Atomic Sledgehammer are getting there. Should be ready at end of week 8. Strawberry Cough will probably need 12 weeks to fully mature - but she'll be monster! Can't wait to see her later. 😈
Likes
8
Share
@Kirsten
Follow
23.3.25: Hulkberry 💜💚 is sprouted, and now progressing well. It was a slow start, as I did not soak the starter plug and the seed kept drying out. I also added more perlite than usual and so when I was watering the seed, everything was moving with the perlite. Now that we have broken soil, I did need to remove the shell as it had dried out and became stuck. It came off easily enough, and I did not cause any damage to the plant. The extra perlite should be fine now, as we have roots to keep us in place at last, as well as the starter plug. When I get some more coco I will top dress, as the level of the soil has lowered since it was filled due to the extra perlite. That probably won't be soon though. It will probably coincide with the normal top dress schedule. The super soil mix I made was approximately constituted 8 gallons of; ☆ 60% Canna Coco ☆ 30% Perlite ☆ 9% Worm castings ☆ 1% Organic dry amendments. - Ecothrive Life Cycle - Ecothrive Charge - Diatomaceous Earth - Ground Cinnamon - RHS Mycorrhizal Fungi granules - Great White Mycorrhizal Fungi blend Thanks for hanging out 🍃 ✌️ 💚 🙂
Likes
22
Share
Day 43: Watered each plant with 1L with nuts 1589 ppm, 3380 us/cm, 3.3 EC (purple punch and wedding cheesecake) 1563 ppm 3325 us/cm 3.3 EC (strawberry banana) 1476 ppm 3180 us/cm 3.1 EC (gorilla cookies) I have 3 different feedings for the 10 plants They look healthy Day 45: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1286 ppm, 2765 us/cm, 2.7 EC (gorilla cookies) 2 different feedings for the 10 plants Day 47: Watered each plant with 1L with nuts 1584 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1481 ppm, 3180 us/cm, 3.1 EC (gorilla cookies) 2 different feedings for the 10 plants
Likes
18
Share
@Diips
Follow
d.50 a few spots appeared on the leafs. gave a 10 ml dose of bio p k and waiting a week before giving a dose of orgatrex and bactrex edit: d.50 i also gave 0.5 ml of calmag from Biobizz edit d.53 will i be giving her the orgatrex and bactrex treatment ✌️🌞 d.53 she got 20 ml orgatrex, 1g of bactrex and 0.5 ml of biobizz calmag d.54 added scrog and did lst with clips to even out the height and space… still need to adjust it.
Likes
24
Share
SWISS DREAM ROSE 🌹 CBD KANNABIA SEEDS Week #7 Overall Week #4 Flower This week she's looking good no issues to report this week. She continues to pack on the weight and you can see the purple in her buds starting to really show thorough. She's really a good looking plant with some great genetics from the looks of the plant easy to grow and maintain. Even if you have some issues she'll recover for the most part. Stay Growing!! Kannabia.com SWISS DREAM ROSE 🌹 CBD
Likes
16
Share
@Mo_Powers
Follow
we are entering the 8th week and the 2nd week of flowering. she is only growing minimally in height. the flowers are getting thicker. she is developing some nice little buds. she is doing really well. no parasites or diseases to be seen. in the greenhouse i have an average of 30 degrees, lowest temperature about 20 degrees and highest 40 degrees. in the video you can see a comparison with the white widow. both are the same age. i didn't use any topping or LST on the white whidow. it's crazy how big the difference is.
Likes
5
Share
@Unkraut
Follow
easy to grow with great yield! when i touched the sticky buds my fingers smelled so awesome and i must say the results were more then great!
Likes
Comments
Share
@Kyledn27
Follow
Wow has she grown like a fat lady on Christmas! She is almost as tall as me now, predicted to be as tall as me (5 11) within the week when her stretching finishes up, super happy with how this grow is going and honestly couldn’t ask for any better, big shout out to Gaia green for this one. Makes growing easier than ever. I top dressed with 10 tbsp of bloom mix this week ( 1tbsp per gallon) and may top dress once more later in flower to make sure I have no deficiencies like with my auto flowers.
Likes
17
Share
@Little_E
Follow
Chopped her down last week which was week 8 of flower. I hung her to let her dry for a week and then I trimmed her up yesterday and she's currently curing. Will update when cured with a final weight.
Likes
1
Share
High humidity and high temperature variation can cause mold and mildew. Healthy plant and high ventilation prevent the problem!
Likes
8
Share
@HighKing
Follow
Defoliated them yesterday. They look a bit small but that's because of the 9l pot, I guess. I hope we will see some big colas. Had no problems at all. 💪
Processing
Likes
6
Share
4-26 Continuing to grow well. Have started watering with run-off because my PPM was really high last week. Watering twice a day and buds are looking nice. 4-27 Defoliated more bottom mini branches and got a few upper leaves blocking bud growth.
Likes
37
Share
@Kirsten
Follow
So the plants survived without light in my garage for 2 days, thank goodness! FBP2 is the best plant by far. She had stacked lots of tight buds, orange pistils coming in nice. Nice bushy structure to her. Super happy with her progress. Royal Critical is doing great, progressed further than all the others so far, lots of orange pistils, curling inwards towards the buds, still white pistils too, so not ready obviously. Not as dense a structure as FBP2, but much better than FBP1 and FBP3, which you can see are way behind both the others. They're looking super straggly. Not sure that they'll improve much at this stage unfortunately. Still I'm pleased overall with this grow, as it's my first and I have learnt a lot about the necessity for LST, and genetics being different from plant to plant. Hopefully we'll be able to harvest the Royal Critical here soon, then FBP2. As for the other 2 plants, I guess I'll have to wait and see.
Likes
25
Share
*****Week 15 growth – March 13 to 19, 2021 – Week 6 flower ****** Feeding has ended this week and we are in flush mode now. The girls have just started to slow down their drinking and pistols are changing colour, buds are swelling, they are getting ready to finish. Added the UV and IR light bars in this week. Started the week with just one bar and then both in place by end of week. Each bar has 10 x 730nm, 10 x 395nm, 6 x 660nm pulling 30 watts each. Trichome enhancers!! Working with the new light this run I have certainly pushed them with more light intensity than they should have received, broke 1100 PAR for a bit. This has also started to cause some foxtails to begin rather than staying compact and swelling the buds. Know for next time……always changes to make 😊 Little more detail….. Mar 13/21, Day 36 - Feed day with full line of Innovating Plant Products but at ¾ strength. - Keeping up the feeding but thinking about nitrogen levels and working on reducing. - feeding with grow – 0.5, micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 0.75, B Storm – 2, S Storm – 3, Terp – 3, Jet Fuel – 1.5, Rezin 1 - 1300ppm and 6.2pH - 4L - Added in the first UV bar today Mar 14/21, Day 37 - Seeing lots of swelling these days from the girls. - Microbe feeding today…….possibly last round of microbes. - Plain tap water with Recharge @ ½ tsp/gal and Natures Candy @ 1.5ml - 400ppm and 6.1pH - 3L all around today…..very little run off. Mar 15/21, Day 38 - Another feed day today. Last week of feed so pushing them a little more. No Grow added! Last couple of feeds with CalMag as well, seeing some magnesium issues so giving last dose. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2.5, S Storm – 3, Terp – 3, Jet Fuel – 1.5, MagNifiCal – 1.5ml - 1175ppm and 6.0pH - 4L - Mar 16/21, Day 39 - Just giving the basic building blocks at this stage. Most of the supplements not added this feeding. - feeding with Grow – 0.5, micro – 1.5, bloom – 2, carbs – 1, Rezin – 1.5ml, MagNifiCal – 0.5ml - 875ppm and 6.0pH - 4L Mar 17/21, Day 40 - Last Feed Day……calling it at day 40 this run!!!!! - 4L of feed water left from yesterday so added in 12L of RO water to keep the ppm down. - Left over plus Rezin @ 2ml, Overdrive @ 2ml (its hard to let go of your routines…I have been using Overdrive for so long……it feels wrong to not be using it this run….snuck in a couple ml😊) - 485ppm and 6.0pH - 4L - Light power pushed back up to 525 watts……..keeping the intensity up to hit the lower bud sites….will see what happens to the uppers. Mar 18/21, Day 41 - Starting flush but not hitting the pots with 12 gallons of water each type of flush! Will just drop the ppm down to nothing and use RO water……planning on having close to 3 weeks to flush….second guessing that I really have that long though so may actually end up adding a flushing agent to the girls…..decide in the next 4 days so can leave plain water time if I do. - Watering with Enzymes @ 2ml…….clean up the roots and help them get more of the ppm out of the media. - 100ppm and 5.9pH……..missed the pH but not adding both up and down, ran with this. - 4L - Light power pulled back down 480 watts Mar 19/21, Day 42 - Dry out day today. Will be letting the pots get dryer now before adding more moisture. - Leaving them for today though. Give flushing agent in next 2 days if going to. - Work down the light intensity more in next couple of days as well. - UV lights going now for 3 hours per day on both fixtures at the middle of the light schedule.