Likes
Comments
Share
@6toecat
Follow
Using a Rhaspberry Pi 4 to automate the watering and a TP-link 105 smart plug to automate the Viparspectra P2000 LED grow light. You can see how I automated it here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony Basically, this is an "Automated Watering how-to Guide for Dummies" - as simple as technically possible. You still require some basic command line expertise, but the steps have been proven and I provide links to the gear I used AND the Node Red code, making this EASIER than anything else I've seen online. Harvesting soon.
Likes
8
Share
@Brujha77
Follow
🍀🍀 Tag59 Es wurde nochmal Entlaubt
Likes
20
Share
@Excalibur
Follow
09 October 2018 - Day 106 Flush run well, Buds have increased and thickened up nicely. Day 107 - No more burn and buds are growing. Day 108 - Conditions are good. Day 109 - Noticed heavy and healthy root growth. Last day before trim Day 110 - Trimmed and Harvested. ** Tent was required ** Day 111 - Colour and smell has become stronger Day 112 - Still drying
Likes
14
Share
@Ozeola
Follow
Coming up on four nodes. Not sure if I should top it.
Likes
13
Share
Hi Gromie's all going good, continue H.S.T training, nice flat canopy. Also started some new clones, experimenting took 2 & 3 branch cuttings instead of single stem, so first topping will give 4 & 6 branches. Veg tent set up. Daisy chained recirculating hydro (4) at back & up to 6 DWC pots in front. Lined pots with insulated mylar, has reduced temps around 5°c. Making D.I.Y. DWC system for .
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D29/V27 - 21/09/23 🛠️ 🌊 1L 💼 🧠 She's growing very fast now and she looks healty. Maybe the silica made his job or maybe can be the CO2 dispenser effect ? We'll see. 🚀 ________________________________ 📅 D30/V28 - 22/09/23 🛠️ 🌊 💼 I cropped the main bud by mistake and then topped it 🧠 It's ok, I have about 10-11 buds now to keep until the end 🚀 ________________________________ 📅 D31/V29 - 23/09/23 🛠️ 🌊 💼 Mounted the SCROG. Made LST, big defolation and a couple of timelapse videos 🧠 🚀 ________________________________ 📅 D32/V30 - 24/09/23 🛠️ 🌊 3L 💼 🧠 The total energy of the plant remain the same, so I expect (or better hope) a big grow of secondary buds in the next days. Let's see ! 🚀 ________________________________ 📅 D33/V31 - 25/09/23 🛠️ 🌊 💼 Added Rhino Skin to the RES 🧠 🚀 ________________________________ 📅 D34/V32 - 26/09/23 - and added water and nutes. 🛠️ EC is 1.0, pH 5.5. 🌊 6L of water and nutes 💼 Made LST with Timelapse 🧠 She seems ok 👌 🚀 ________________________________ 📅 D35/V33 - 27/09/23 🛠️ EC is 1.0, pH 5.5 🌊 💼 LST almost HST 🧠 🚀
Likes
39
Share
Now starting to fatten up and are nice and frosty. Hard to choose between them at the minute on looks but the blue sherbets are definitely some big girls. Buds are dense as fuck and smell lovely. Some of the leaves are quite burnt now so they’re not the best looking lot. Can definately see the affects of the overdrive. Great product. Last week of feed then on to flush.
Likes
10
Share
@Rangaku
Follow
Settling in after transplanting loooking lush green and healthy maybe another two weeks of veg
Likes
16
Share
Harvest day 65 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
8
Share
Las plantas asimilaron bien el calcio y siguieron adelante, se realizó un trasplante en el día 20, de 300cc a 5lts airpot con solo coco, ahora solo queda esperar a empezar el lst💪💪💪
Likes
34
Share
@rhodes68
Follow
11/22 Week 14 One has fallen five remain FFT-11-1 is in dry Rate of harvest as much weather driven as anything dont want a lot exposed at once. Planning every 2-3 days FFT-10 is in full bud building mode still so keeping the pedal down on them with a 10/10 finishing feed till we see some closure on those buds. FFT-9 is really showing great color purple so deep almost black water only FFT-11-2 is waiting her turn water only 11/23 pics Harvest FFT-11-2 in the morning 11/24 Yield on FFt-11-1 : 189 grams dry FFt-11-2 in dry (1100 grams wet) 11/25 Unless the weather turns on us will harvest both FFt-9s tomorrow FFt-11-2 still in dry be finished tomorrow 11/27 The FFT-10 stands alone , showing signs of ending, putting them on a finishing feed and reduce as the buds close 11/28 Welp those signs of ending backed off and she making buds heavy again. Go girls go not reducing feed till this goes as far as it will zero pressure to harvest. Lights on pics Built a better jute cage for FFT-10-2 she is very wide and there was a danger of branches breaking from weight of buds. Increased Bloom and Peak PK hitting them a bit harder as dont want noticeable def beginning until I want them as much as practical. Buds still spikey and hairs strong though seem a few less its not much. Seems every time we switch up our PK for them it triggers another round of production. See what what when they begin to slow again. This is fun dont get to do this... ever... no space pressure finally although thats due to problems in germ more than my design going forward I think. Plants are at max par being under their individual ts-2000s so I killed the side lights not doing a lot anyway with the tent near empty 11/30 At lights on the buds seem to be slowing, reducing the Bloom nuets and PK after a single hard hit to see if they pick up
Likes
39
Share
@Mastr
Follow
Hi everyone I'm not very happy I top them very late I should done it 2 days ago or yesterday coz I been very poorly couldn't even get out off bed but I topped all lady today (day16)from 6th node and 1 from 4th node(by accident) I cut the wrong stem then I have to cut rest so hope it doesn't effect yield Day 21 they are so bushy already 1plant day21 start preflowering I feed them 1ml silica 2ml biogrow 2ml heaven 2ml activera 1ml alg amic With 1L ph water each Plant every day Following week will reduce grow and add some bloom and top max (Recommended silica liquid for everyone)
Likes
10
Share
@DeltaEye
Follow
I put the plants into an NFT system couple weeks ago. I could have waited a bit longer for the plants to develop a stronger root system before placing the rockwool cubes into NFT but I was being impatient because of the slow start and wanted to get the plants under proper light. Now two weeks later they are growing well with good root development. I switched the lights to flowering cycle about a week ago so they should start stretching soon. No preflowers yet.
Likes
5
Share
@DrShotzUK
Follow
Wow well we’re do I start. Absolute dream to grow Smelt strong of citrus and oranges , was amazing to smell , After just 5 days of drying and 1 week of curing the result was imense. Absolute knockout weed with an orange taste and a smooth on the throat. One of the best I’ve taste. Highly recommend
Processing
Likes
13
Share
@Jd1971
Follow
Biosys insteat micobe tea once a week
Likes
12
Share
Likes
4
Share
Viel gibt es zu dieser Genetik zu sagen. Seit 5 Jahren 10/10 Sterne 💚
Likes
7
Share
Bring em on home! Mostly plain water and some molasses til the end