The Grow Awards 2026 🏆
Likes
Comments
Share
@Prilyfe13
Follow
June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa
Likes
28
Share
🌱 Growtagebuch – Woche 11 🌱 "Woche 11 und die Ernte der Apple Strudel Auto stehen an. 🏁 Aufgrund von 5-Liter-Töpfen und Fimming-Experimenten in einem 60x60x140 cm Zelt fiel der Ertrag mit knapp 24 Gramm eher gering aus. 📉 Die Ernte hätte bereits in Woche 9 oder 10 stattfinden können, wurde jedoch bewusst hinausgezögert, um eine bernsteinfarbene Trichomentwicklung zu erreichen. ⏳ Dafür überzeugt die Qualität der Buds auf ganzer Linie. ✨ Sie duften intensiv nach Apfel und die Wirkung ist relativ ausgewogen. leicht Indica-dominant. 🍎😴 Qualitativ ein sehr gutes, quantitativ jedoch eher bescheidenes Ergebnis. ⚖️" Ähnlich der anderen bieden Pflanzen...
Likes
10
Share
Purple Punch am 26.12.2024 Tag 49 / 14.02.2025 Meine Purple Punch steht schon in der 7 Woche, ein großer Erfolg für mich. Habe mit Bio Bloom und Bio Grow in der letzte Woche sie gedüngt, das Ergebnis kann sich sehen lassen. Heute, wird Acti Vera, Alg A Mic und Bio Heaven in das Gießwasser hinzu gegeben. Feedback: Ich bin überaus voll zufrieden wie meine Pflanze sich entwickelt hat, ich denke die gute Erde und der Dünger von Biobizz hat ein großen Teil beigetragen. Ich werde mal schauen wie die Pflanze in der 8 Woche aussieht. Ich nehme gerne Ratschläge von der Community an.
Likes
14
Share
@karchutos
Follow
Buenas a todos! La planta es una bestia! crece muy rápida y con mucha fuerza, estoy muy sorprendido. Gran genética y buen feno, un lujo...
Likes
2
Share
@BemaGwaai
Follow
It was time for harvest. the video was taken outside - a little bit of real sunshine before the chop. With out a microscope it was particularly difficult working out the colours of the trichomes. So I guessed.
Likes
4
Share
For FW3 no fertilizer. Last week of growth I added 50 g of Wizzy's Flower-Fertilizer, which lasts for the whole flower period. Also this week no booster, only tapwater, but I need to increase the temperatur of it, since it always causes a shock when watering the plants. Still no problems with pH, micorbiology takes care of that.
Likes
8
Share
@Hawkbo
Follow
Day late on the update, pics/vids were taken on time tho just been a crazy week of harvests and trimming and keeping up with these. I transplanted all of them into 1 gallon bags 4 days ago from today. I linked up with Rain Science Grow Bags on Instagram and got them to offer all my followers and friends a discount of 10% off entire order from their site with the code ' bangdang ' so if anyone is in the market for a pot upgrade use that code. I got them in the mail 3 days after I ordered. Reason I went with Rain Science is because they offer identical air flow for rapid growth as the radicle bags, just using a different material and a tighter knit so water doesnt flood out the sides during feeds and when you pick these up when the coco is dry, it wont fly all over the tent like with the radicles. They're the optimal bag for autoflowers especially.
Likes
36
Share
@codebase
Follow
Finally all got rid of their little hats and are looking healthy. TD 3(drooping cotyledon) needed a bit of help so I removed the seed shell with tweezers. Note: The Mycotrex is listed as nutrient because it resides around the shell and than again 10cm below it. 2020-11-12: 1l nutrient solution with 0.5ml of Bia Canna Vega since the soil is Light Mix without any nutrition. I also lowered the light since they were stretching a bit. Light at 25% intensity. 2020-11-14: 300ml ph adjusted water each 2020-11-15: Raised light intensity to 50% 2020-11-17: 300ml ph adjusted water each TD1: 7cm TD2: 5.5cm TD3: 7cm
Likes
8
Share
@jsnafu
Follow
She is growing well, after a slow start. Light is 17” and the par is 600ish. I am going to make canister with yeast. Having a problem with low humidity and high humidity at night in the 70% range. Still just watering with cal mag, VJ and B-52 about 50-100 ml every other day. End of week update: the environment is doing better. Moved the light a little closer about 700 par. Watering has been 2-3 days about 75ml. Exciting things to come…
Likes
19
Share
@nonick123
Follow
Día 27 (20/05) Riego con 250 ml de Té de Compost Día 28 (21/05) Vuelven a tener sed! Las riego con 250 ml sólo H20 pH 6.2 Día 29 (22/05) Riego con 750 ml H2O+ Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 30 (23/05) Banana Purple Punch Auto está sedienta de nuevo! 500 ml de sólo H2O con el pH 6.3 Día 31 (24/05) Banana Purple Punch Auto está sedienta de nuevo! Riego con 750 ml H2O + Regulator 0,15 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 32 (25/05) Las plantas no paran de crecer! 😍 Día 33 (26/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Banana Purple Punch Auto está creciendo unas ramas laterales impresionantes 😍😍😍 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
10
Share
All looking good, was looking like there was gonna be a few mutants but they seem to have sorted themselves out. Topped most of them now at day 22, will start spreading them out a bit this week and start training them up
Processing
Likes
6
Share
Just got a new 600w mh/hps light for now it’s in my current setup with my 250 n it’s dimmed to 50%, only reason I mention is b/c the plants seem to be loving it!! They’re 12 days old from seed, still just ph’d water for them! So far so good :P
Likes
17
Share
@4chuk
Follow
Dec. 25 - Merry Christmas! Week 12 begins. Dec. 31 - I gave her 1 Litre of nutrient solution and about 500 mL spring water over the week, starting the day with a spring water flush then continued the day with nutrient solution.
Likes
14
Share
@Satax
Follow
Gelatto is a flavorful strain whose taste has made it one of the most released strains in recent years. Indeed, more and more banks want to add it to their catalog. This version comes from the original Sunset Sherbet x Girl Scout Cookies formula, specifically the phenotype known as Thin Mint. On the American West Coast, this is one of the most requested new genetics. She is sometimes referred to as Larry Bird.
Likes
69
Share
@nonick123
Follow
Día 115 (23/09) Riego con 250 / 500 ml H2O Día 116 (24/09) Riego con 500 / 1.000 ml H2O - Hace mucho calor! (31 ºC) LemonPaya empieza a formar nuevos pistilos a velocidad decente! Día 117 (25/09) Riego con 500 / 1.000 ml H2O - Hace mucho calor! (31 ºC) OnionOG #1 empieza a oler a tierra húmeda y champiñón 😍 Purple Punsh S1 está empezando a llenar los bordes de las hojas de abanico de una espesa capa de tricomas. Increíble! 💥 Día 118 (26/09) Riego con 500 / 1.000 ml H2O - Sigue haciendo muchísimo calor! Hoy hemos tenido un día con 37 ºC de máxima! Increíble la cantidad de tricomas que están formando Purple Punsh S1 & KS1! Las hojas está completamente perladas! 😍💥 Día 119 (27/09) Riego con 500 / 1.000 ml H2O Que calor! Seguimos con 32 ºC de máxima! Día 120 (28/09) Riego con 500 / 1.000 ml H2O OnionOG #1 muestra unos cogollos brutalmente densos y gruesos! I'm in love! Día 121 (29/09) Riego con 1 litro H2O pH 6,5 + Kelp Hidrolizado 0,3 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
3
Share
@Skuuuunk
Follow
Germinated 10/06 Defoliated pretty heavily a few days before the pictures. Have lights cranked up to 8 now. Turned down chiller 2 degrees and humidity down 5%. Changed feeding ratios to 1-1-1 for “Flora Trio”. Quit using Flora Micro and switched to my own blend (see photo). Now using 3 different solutions, Miller Microplex, Calcium / Potassium Nitrate, Ammonium Sulfate. Still same target ppm as FloraMicro, just can’t mix sulfates with Calcium Nitrate so I dose Ammonium Sulfate into my res first and then wait 15 minutes.
Likes
3
Share
23.08 Girls are stretching and creating budsites. Never had 16 of them in 5x5 and it is a bit too much. I have trouble controlling humidity. It’s already apparent they are taking their time and that it is more than 8 week strain. Officially it should be done in around 10 weeks.
Likes
Comments
Share
Growth is amazing and the girls already need to be transplanted into their final 5 gallon pots. Transplanting went well, I could have waited another week and I think it would have been better. Anastasia is having issues with the main stem growing straight so I added supports to encourage straight growth. Drizella is too but not as severe. During the transplant process. I also sprinkled Great White Mycorrhizae on the roots for better root health and to reduce transplant stress. Nutrients still hand watering every other day to run off. 5.8 ph / 1.63 ec / 74.7 degrees I reconditioned my coco coir from my first grow that was originally 1 bag of royal gold tupur blend which I believe produced some nats due to the forest material mixed in with the coco coir. This one original bag was enough to fill two 3 gallon pots and transplant them into two 5 gallon pots with a little left to spare. I hand cleaned that first grow medium to remove all large root debris and then rinsed it thoroughly in Ro only water before letting it dry for several weeks leading up to this current transplant. I then soaked it in a solution of Sensizym and calMag to break down any remaining dead roots into nutrients while ensuring the medium is still well buffered. The girls were started in the 3 gallon pots using a new bag of roots organics brand 70/30 coco coir/perlite. That medium had to be buffered well with calMag to avoid common Calcium and Magnesium deficiency that surface due to coco coirs ability to soak it up and steal it from the plant. This was a leason learned from my first grow that resulted in several foliage feedings to adjust for. I was able to recycle a great deal of coco coir from my first grow which provided me enough to bump this grow up to three plants from two. So I used the recycled coco as the base and most of the back fill in all thee 5 gallon pots. I did have to use a little extra of the 70/30 to top everything off properly. I still have a 1/4 of a bag of the 70/30 left dor future grows.
Likes
2
Share
@BombBuds
Follow
So den Ladys geht’s super gut. Bin mehr als zufrieden grad. Alles ist perfekt ausgefüllt und lichpenetration ist top.