The Grow Awards 2026 🏆
Likes
Comments
Share
Keeping my lady happy is a full-time job full of surprises, sometimes heavily exhausting long hours. I'm giving all my love to them. So thankfully, Respect and Love for my family for keeping me able to spend hours daily. 🌅🙏🤙 Unfortunately, grow diaries crash every time I update nutrients and photo 🤷
Processing
Likes
6
Share
I could smell her at this stage and she smelt of a citrus berry smell. It’s just tantalising need now.. I had a solid ten days of sun and she loved it. She is growing quickly too I assume that is the nutrients taking full effect and the perfect weather.
Likes
4
Share
She will be short but fully covered in buds.
Likes
6
Share
Eccoci qui... Finalmente dopo uno stop per il lavoro torno ad aggiornare il diario con il capitolo finale... Questa piccola mi ha stupito per il forte odore che emana è stato davvero un casino tagliare e seccare questa varietà in quanto l'odore è stato davvero pazzesco, colori come voglio io con foglie molte scure violacee. Super resinosa e compatta per non parlare dell'odore, una cosa speciale!!! Sicuramente verrà riproposta!!! Grazie ad Anesia Seed e ad Xpertnutrients per la collab e a tutti per il supporto🔥🌲❤️ NE VERRANNO DELLE BELLE
Likes
Comments
Share
These plants had the most beautiful green
Likes
24
Share
@Seedler
Follow
i used a low dose because for my plants even half strength is often too much, this saves nutrients tho. Around 825ppm, 18 DLI, Ph 6-6,25 thanks to FastBuds and Terra Power!
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
1
Share
Medicine is expensive and, luckily, I am now able to grow my own where I live. I started growing in this 2x4 Gorilla Lite tent and "piece-meal'ed" my setup together. I started with one Mars Hydro TS1000 and was fortunate enough to get a second one before I started flowering. I used a 6-inch AC Infinity fan for exhaust and a 4 inch AC Infinity intake fan. Using a Gorilla carbon filter and it works great.. I added an Exhale CO2 bag at this time not really realizing that it wouldn't do much good for a few weeks still... It's impossible to find oscillating clip on fans where I live so I had to make do with some non-oscillating fans. Grew in 100% Purple Cow Indicanja soil and did not give ANY nutrients during the vegetative stage (they did just fine). I probably under-watered versus over-watered for quite some time as folks at the friendly local grow store kept telling me that I'd inevitably overwater at some point as a first time grower so I waited a long time in between watering fairly often...
Likes
14
Share
@Pennuts
Follow
finally the plants are ready and i harvested them, the trichomes were 70% white and 30% amber. In the next few weeks i will give an evaluation of the smell and taste and i will post pics of the buds
Likes
39
Share
Wie man sieht kommt ziemlich viel Farbe ins Spiel ich liebe diese Sorte jetzt schon 😬😁👌 Alles bestens habe gedüngt aber weniger angegeben...😏
Processing
Likes
6
Share
@Ferenc
Follow
Hey! Just back well I started a diary but stopped growing so placed to my friend's house. Now I decided to be back and yeah here we go.... They are nice fertilization happens 3x a week with the mixture of Biobizz family (Biobloom, Topmax, BioGrow, Epsom salt, Gunokalong extract.) They grow as hell. 600W LED, 18 hours on 6 hours off, 200 ml water per plant a day, humidity approx 35 percent. Day 49: More LST has been done they grow unbelievably fast...
Likes
81
Share
I'm gonna jump right in..👨‍🌾 The high stress technique I have used a couple days ago called super cropping, I (tried more or less) to keep the canopy under control and more even. This also allow lower bud sites to rise to the top and slow down the 'stretching'. 🌲🌲🌲🌲🌞🌞🌞🌞 The trade in doing it at this stage, is that the plant is also focusing more on healing the stems instead of total focus on the buds. But I'm probably early enough in the flower stage they will make it up by having more strong stems in the end. That's because the points they are broken now are gonna heal back more strong.💪💪💪 I've added some nutrients to help them heal. Aptus is working great with my organic soil👍😎💚 🌊💦 🌞🌞🌞🌞🌞🌞🌞🌞🌞 As you maybe have seen I've added some extra lights. This are Mars Hydro's new Adlite's. Here is some info about them in my own words.👨‍🌾 -IR 15, is a infrared light that is promoting extra photosynthesis. Basically long wave length of lights that will penetrate leaves and hit the stems, so the idea is stems will be more strong and be able to carry bigger buds. -UV 30, is a ultraviolet light that will try to mimic the radiation that comes of the sun. A little explanation about what this does to the plant in nature is that the plant will make it's own sunblock oil in the form of trichomes. So by adding this light the idea is that the plant is gonna work more to block this 'radiation'. -Deep Red 30, is like the title maybe already explained a red light booster. In nature the spectrum of the sun changes with the season, so it's easy to explain the sun will get more intense and contains more red in the summer. The wavelength of red is also pretty long like the 'infrared' these will sometimes penetrate leaves and hit stems and lower buds. The idea is more photosynthesis.
Likes
16
Share
@Naujas
Follow
it's been 3 weeks already, the girl is short, and I performed a major ring cut on her:) this will be my first such growth, I want to see something different :) overall, the girl looks healthy:) I think she will be really great :) as long as she hasn't received the main ones nutrients, but I will introduce her to them in the next watering - she will like it :) good luck to everyone :)!
Likes
205
Share
@yan402
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 11.10.25 VW24 – Fed 3l of #1 → 2l runoff 12.10.25 VW25 – Fed 3l of #1 → 2l runoff 13.10.25 VW25 – no water no feed 14.10.25 VW25 – no water no feed 15.10.25 VW25 – Fed 3 plain pHed water → 2l runoff 16.10.25 VW25 – Fed 3 plain pHed water → 2l runoff 17.10.25 VW25 – no water no feed 18.10.25 VW25 – Fed 3l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new fish batch): 30→ 60ml = 1.00 → 2.00 ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL : = 180 ml per 30L = 6.00 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done
Likes
23
Share
So this has definitely been a slow grow, but I also mainlined it and topped her twice... I'm not feeding her my regular feed, which is like steroids. I'm using the dots and i was warned about the growth being slow in the beginning, so no worries... I was actually going to grow her out normal, but I had to use the flowering tent for an unexpected auto flower, not being an auto flower .. no bad one is doing well. Shout out to @Grow4releaf
Likes
Comments
Share
the buds are swelling nicely now starting to reduce the amount of feed i give it and increase the {Rain water} ,we use water from the sky all times we find its the best source of water for plants. This project is to show you can have an idea in mind and for fill it T shape {top shelf} This is all down to the spacers and remember this was a cutting straight into flower as are most of my grows,if anyone is into this and would like to learn then drop me a text. we can send you some free spacers.
Likes
44
Share
For LIQUIDS ******GREEN BUZZ LIQUIDS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Processing
Likes
7
Share
@gablmo
Follow
It was a busy week full of events. I got them a 600 watts HPS light and microbes to help them grow faster. I finally started the trellis netting to even the canopy and get more from the lights and I also spray the plants again for bugs. I found out that I've been using powder nutrients on my reservoir and that's probably why I've been getting floods two or tree times a week and now the valve is open only when I'm there, because I'm sick of cleaning and I took that little sick plant out. My cats have her now.
Likes
1
Share
Girls doing well, clearly see all hit with hit substrate 😂 but ChemDawg is despite the hit battling n fast 😂
Likes
33
Share
ça butine dur