Likes
Comments
Share
Really starting to frost up and beautiful smells ranging from sweet earth to danky dank. Struggling 2 keep humidity down and had 2 cut a small amount of mold from Finnish frost:( added trays of moisture crystals 2 combat but need a dehumidifier.
Likes
14
Share
Week 12+13 Update – Final Harvest & Reflections 🌱✂️ First off, sorry for the late update—super busy at the moment! This will likely be my last report for now. I’ll still share the final results, but after that, I’m taking a break. BioBizz#1 – BT59 Harvested, and as expected, a disappointing yield—typical for BioBizz. Final weight: 71.88g AN#4 – BT65 As expected, the biggest plant in the grow! This grow confirmed that I’d stick with Advanced Nutrients in the future. Final weight: 163.88g AN#3 – BT64 This grow was an experiment in 60x60x120cm, and let’s just say—not recommended! Zero height control, only 2cm clearance from the LED. Somehow, she survived. Now I’m super curious about the final yield! Final Thoughts Advanced Nutrients proved superior, and BioBizz didn’t impress me. Stay tuned for the final numbers from AN#3! 😏
Likes
17
Share
Such Bittersweet Joy Added this week as ‘Flowering’ although technically should be harvested as I but I haven’t had a chance to weigh or anything. I will do that next week once trimmed etc. So finally cut them down on D89, it was a beautiful day outside and it just felt right. Although when it came to the deed itself I felt sadder than I thought I would for my girls and the time we had together. All 6 (I’m growing another 3 different strains but not included on this diary) are now hanging to dry in the tent. Temp -18 C; Humidity-60% seems to be holding steady with no tinkering thankfully. After the 3 days they have all dried noticeably, perhaps 4/5 more before trimming / curing. I’ve had quite a close look at most of the harvest and as far as this noob can tell, there doesn’t seem to be any issues with mould / bud rot. Fingers remain crossed. I did have one very profound moment this week... It happened as I was surveying the harvest hanging up for the first time. I could feel my mindset change suddenly from the constant paranoia over their health and overcoming my impatience to “I actually have a crap load of weed”. It was beautiful beautiful moment... Thanks for reading. Have a great week 😊
Processing
Likes
141
Share
@Eyeduno
Follow
Flushed the Biggest plant sataday flushed the others today, two week maybe less with Justin plain water, the smell is just nextlevel 👌🏻
Likes
6
Share
Fast BUDS OH YAH! excited to see these leaves growing . Going to teke it easy with her for the next few weeks. Day 10- Had to get a humidifier because my RH is to low. Leafs are dry but she's looking healthy to me! Day 12- Growth is on pace and she's looking happy with her new humidifier . RH is up to 45% and temp is at a constant 80F . Life is good for this young one. Day 13- Notice the leaves on the third node growing are misshaped on this one. interesting.
Likes
18
Share
Finally we are in bloom, the plants are fine and continue to grow with few problems, in this phase the Mimosa Evo in the abs pot, has some leaves locked inwards, while the others are fine, I wonder if I should worry about An excess of fertilizers or environment? The Tutankhamun has these tips pointing downwards and I don't understand why, I only gave water for almost 1 week but nothing has changed, the Gorilla Zkittlez is exploding with flowers and the other Mimosa continues to grow, although I believe that I will harvest a few grams from that plant! I also started giving him Bud Candy to increase the flavor and a little yield!
Likes
62
Share
@nonick123
Follow
Día 43 (02/12) CBD Auto 20:1 #1 no para con el stretch! 🚀😍 Le elimino algunas hojas de abanico que tapan la luz a los cogollos inferiores Está empezando a pedir más agua cada día, pero no me extraña con lo grande que es! CBD Auto 20:1 #2 está empezando a engordar y engordar los cogollos 💥😁 OG Kush Auto tiene unos erizos preciosos! Día 44 (03/12) CBD Auto 20:1 #1 sigue imparable. Elimino algunas hojas de abanico OG Kush Auto se empieza a mostrar más sedienta en la formación de cogollos! Día 45 (04/12) CBD Auto 20:1 #1 sigue imparable. Elimino algunas hojas de abanico más! OG Kush Auto también le elimino algunas hojas de abanico Día 46 (05/12) CBD Auto 20:1 #1 Schwazzing / defoliación intensiva OG Kush Auto Defoliación! Día 47 (06/12) CBD Auto 20:1 #1 repetimos Schwazzing / defoliación intensiva debido a que la planta no para! Es increíble lo que crece esta planta! Día 48 (07/12) OG Kush Auto ha empezado a aumentar el consumo de H2O, y se muestra sedienta en esta fase. Mañana aumentaré el volumen de riego de 750 ml a 1.000 ml Debido a que se acerca una ola de frio, hago una mejora sustancial en la tienda Coloco un radiador de aceite + un termostato digital Wifi (controlador de temperatura) para poder controlar el radiador Me encanta porque desde la App puedo programar eventos en función de cualquier parámetro, de modo que puedo controlar la histéresis del radiador 😁 Tras un par de días de pruebas, consigo una temperatura estable de 22 - 24 ºC con luces ON! 😁 Día 49 (08/12) CBD Auto 20:1 #1 ha crecido increiblemente esta semana comparandola con la semana anterior! Un monster pheno! CBD Auto 20:1 #2 hago riego con 750 ml H2O RO + BIO PK 5-8 10 ml/l. ¡Un empujón para la recta final de floración! Tiene unos colores preciosos en los cogollos! Con tonos rosas y morados en los apices! 😍 LSD-25 Auto hago riego con 750 ml H2O RO + BIO PK 5-8 10 ml/l. ¡Un empujón para la recta final de floración! Está preciosa con ese morado casi negro que presenta en cogollos y hojas, unido a los pistilos de color naranja fuego conforme van madurando OG Kush Auto tiene una formación de cogollos impresionante, y ha empezado a cubrir de tricomas todas las hojas que salen de los cogollos 😍 Lo unico preocupante es que ha empezado a mostrar algunas manchas marrones en las hojas de los cogollos... Riego con 1 litro de H2O RO + 1 g/L de BACTREX para ver si le ayuda con la gestión de este exceso / deficiencia 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Likes
1
Share
Both plants have just finished their final stretch. The Atlas has almost tripled in size over the last two weeks and now stands about 75 cm, while the Epsilon and its more dominant Indica rest at about 60 cm. The only thing I have had to do in five weeks is measure the lux amount to keep it at 40,000 at the top of the canopy by raising the lights, and I have watered both five times, with the last watering adding bloom and top max. I am very impressed with the node spacing and uniformity. Up to this point, these are the easiest plants I have ever grown, so I have already germinated another two Epsilons and am in the process of starting another Atlas F1, Gaia F1, and Apple Fritter. I estimate about 4-5 weeks flowering left for the Epsilon and 5-6 for the Atlas.
Likes
4
Share
Ganja Farmer Seeds Zkitzz Auto In @highpoweredorganics new ISLAND-BLEND. Fed water soluble powders. AQUA-MARINE Grow Formula 5.1.4 paired with OCEAN-POTION and RHIZO-MOJO in dechlorinated water. Alternating ANTI-MATTER & DARK-MATTER feds weekly. Foliar fed GREEN-SUPREME daily Following High Powered Organics Island-Blend Feed Guide. https://www.highpoweredorganics.com/ Happy growing friends 🇦🇺🇦🇺🇦🇺
Likes
3
Share
@PalmaGrow
Follow
Se inicia nueva semana del 26 - 1 se aprecia buen crecimiento pronto estará lista para poda y transplante.
Likes
Comments
Share
7 horas de sol, Floranova Grow y Armour Si de GH, agua de grifo. Le sentó bien el corte ápical. Le podé el piso inferior, tal vez hice apical tarde. Apliqué LST.
Likes
103
Share
@Hou_Stone
Follow
This week, growth is going very well for tarte tatins. 🌿 I am adding anti-midge bird stickers, to prevent their appearance For this grow, I plan to let each plant grow with a large main bud, without topping. Next week I will cut the lower branches closest to the ground. ----------------------------------------------------------- My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/ ----------------------------------------------------------- 💧Watering: 1L on day 9 and 0.5L on day 12 I use tap water, adjust the ph to around 5.8 and water ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 80% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat Romberg 95x95cm. ON 45 minutes. OFF 30minutes. In a loop ----------------------------------------------------------- Thank you for your visit🙏 And thank you very much for your support💚 ❤️️ Long live to grow diaries community❤️️ 👋
Likes
3
Share
Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.
Processing
Likes
10
Share
@GrowerGaz
Follow
Very happy this week as my friend gave me a female Mac x Purple Punch he was using as a mother plant. That is in an 18 litre soil pot. The 3 Rado Z are now in 15 l autopots fitted with airdomes. A soil mix was made with dutch vega bio soil , Bio grow and silicium flash. The MacPunch I have stripped the lowers and trained it using easy bend clips.
Likes
11
Share
Likes
24
Share
Hallo zusammen 🤙. Das war es für sie. Die Buds sind steinhart und der Geruch ist einfach Hammer. Sie riecht süß aber auch sauer irgendwie. Kann man schlecht beschreiben muss man einfach riechen. Wir sehen uns in 3 Woche mit dem Erntebericht. 🤙🤙🤙 Sie erhalten 25 Prozent Rabatt in unserem Shop Mindestbestellwert beträgt 75 Euro https://greenbuzzliquids.com/en/shop/ Code: GD42025