Likes
Comments
Share
9/1/23 - Day 80 - Things are going well, the buds are growing everyday still. A couple more weeks! 9/3/23 - Day 82 - I snuck in about 1 min before the lights turned on. I got some cool shots up above. I also snuck in a cool photo from the base of the plant looking up. 9/5/23 - Day 84 - I took a few microscope shots of the THC. They are still very much see through so there is still a couple more weeks to go. I also got a mockup of the hanging system I will be using see pics above. If you are looking for this experience, check out https://www.getleaf.co/
Likes
79
Share
@Hou_Stone
Follow
Flowering begins. I did defoliation on the lower tiers on day 4 of flowering ------------------------------------------------ Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone
Processing
Likes
6
Share
Дальний и ближний левый одинаковой высоты, одинаково хреново зацветают, НО зацветают, позже подзалью фоток температура ночью 19 температура днем 26 влажность 40% световой режим 21/3 высота растих 92см (при последнем замере) ПШ компота 6.5 ppm 1560 кушают по 4-5 литров ppm на выходе 1677 температура компота на выходе 20,4 Просто водой не проливал
Likes
3
Share
Hello fellow growers and welcome to Week 5 Not much to say besides enjoying the view while they grow 😍 Defoliated one of the oldest leafs at the bottom and flushed her with 5.5L of ph water at 6.2 - 6.4. The buds are fattening up each day and the trichomes are starting to show up 😍 Stay tuned for more 👋
Likes
12
Share
Likes
5
Share
Well got to the end with a nice harverst. smoke is good.. rosin is better!
Likes
6
Share
Really good looking plant, I'd say she's definitely a sativa by the shape of her leaves and the distance between internodes as well, I think this lady is ideal to be trained, I guess she'll be a big bush full of nice colas, let's see what we can do! Follow me on this journey guys, this ladie have been Transplanted to her 11l definitive pot on day 34 since planted, may 5th,let's see how this lady keeps developing!
Likes
6
Share
@Simba732
Follow
Week full of stretch! Good day lovely people ✌️ Ms Purple spend the week reaching for the stars. We are now entering the bulking phase of our journey and our lady is smelling wonderful ( some banana with a hint of lemon) love it ❤️ She is drinking more, and I’m making sure to water to full full saturation when about 3 cm of my top soil gets dry. Can’t wait for the coming weeks. Let’s go
Likes
13
Share
@Growbody
Follow
Herzlich willkommen zu meinem neuen Grow mit der Orange Sherbet Auto von 2Fast4Buds. Die Eltern sind Cookies Auto F5 x Tangie´matic, der Typ ist F3 Feminized Polyhybrid Autoflower. Der Strain war Winner of the American Autoflower Cup 2025, Kategorie Best Auto Hash. Die Aussicht auf frischen Orangensaftgeschmack macht mich wunderfizzig. Wieder verwendet wurde für diesen Grow der 15Liter Stofftopf von ROOTiES, die Sonnenerde Bio Hanferde, BioBizz Wurmhumus, BIONOVA + zamnesias MonsterBud Mix Living Soil, zamnesias Smart Start Plugs und Plagrons Seedbooster Plus. Hat sich alles bestens bewährt. Tag 43: 1,0 Liter Wasser. Tag 45: 1,0 Liter Wasser. Tag 46: Die Orange Sherbet Auto von 2Fast4Buds bekam diese Woche weniger Wasser, der Stofftopf trocknet unten wieder ab. Sie hat sich nochmal fast 20 cm gestreckt. Tag 47: 1,0 Liter Wasser. Schön, dass du dich für meinen Grow interessierst. Schau gerne wieder rein. 👋😎
Likes
25
Share
@Dunk_Junk
Follow
Week 6 in veg done and dusted! She grew 12cm! Day 42 - I clipped off about 6 huge fan leaves to allow light to hit her lower branches. This is her last day of 20/4 lighting. It will be 12/12 from now on. 💪
Likes
3
Share
Grow Diaries Report: Flower Week 1 – Stretch Madness & Heavy Grooming 🌿🚀 Week 9 – Flower Week 1 Update The flowering phase has officially kicked off, and wow, this plant is on a mission to touch the sky! The stretch this week has been intense, with the plant shooting up significantly. To manage her vigor and focus her energy on bud production, I’ve had to step in with defoliation and additional lollipopping. This Week’s Highlights Massive Stretch: The plant stretched dramatically this week, filling up the vertical space in the tent. Defoliation: I removed a significant amount of fan leaves to improve light penetration to the lower branches. Lollipopping Redux: Further cleaned up the lower parts of the plant, focusing her resources on the top colas. What I Did Lollipopping: Removed more of the lower branches and leaves that were unlikely to contribute to bud production. Defoliation: Took off some large fan leaves to improve airflow and light exposure throughout the canopy. Nutrients: Continued with the bloom feeding schedule, ensuring a balance of phosphorus and potassium for flower development. Environment Management: Adjusted the light height to prevent light burn and tweaked the fan placement to improve airflow in the now more open canopy. Observations The plant’s stretch has been both impressive and challenging, but the defoliation and lollipopping seem to be working. The top canopy looks well-lit and primed for flower development. No signs of stress from the grooming, which is always a relief during such an aggressive stretch. Challenges The rapid vertical growth is pushing the limits of the grow tent. I’ll need to monitor her closely to prevent overcrowding or light burn. Next Steps Keep monitoring the stretch over the next week—potential supercropping if necessary to control height. Fine-tune the nutrient schedule to ensure the plant has everything it needs as bud sites develop. Maintain low humidity to reduce the risk of mold or mildew during early flowering. Conclusion The first week of flowering has been an explosive start! The stretch is real, but with proper management, she’s looking set to develop some fantastic buds in the weeks ahead. 🌟 Any tips for managing a stretch-happy plant in a tight grow tent? Drop your advice below! 😊
Likes
5
Share
harvesting soon do not want to many amber trichomes, looking for the full sativa effect.
Likes
5
Share
Things are moving fast! 🚀 Two out of three plants started showing their first signs of flowering early in the week, while the one that got “auto-LST’d” by the fan took 2–3 days longer to catch up but she’s finally there too!🌱 All three are now starting to stretch, and I’ve gently tied down a few branches with soft wire to keep the structure nice and open. Nutrients were adjusted just in time, and everything continues to run super smoothly. Can’t wait to see how these berry babes develop over the next weeks!🍓🌱
Likes
24
Share
NOTES: Keeping the pH between 5,8-6,0 and EC at around 1,4-1,6 depending on system. EC at 1,5 seems to be optimal and my measurements are staying pretty steady at that level. Humidity is lowered to around 50% if I can. The tops are now at around 45-60cm height from the soil. Continuing the last heavier defoliation/pruning process that I started yesterday at the end of 2nd flowering week. I saw no signs of mold or any other issues as I went through the plants. After this week I'm going to change the nutrient solutions on the tanks and fill them with fresh nutrients with minor changes: Dropping the amount of Grow from 1,5ml to 0,5ml and increasing the amount of Bloom from 1,5ml to 2,5ml. After the change I'm only going to refill the tanks without adding any Grow and will instead increase the amount of Bloom to 3ml. Propably a one more change of fresh nutrients until flushing with Final Solution prior harvesting. Day64 (19.12.) Some more defoliation focusing on the upper growth revealing bud sites below them and keeping off the moisture. Already got a trash bag almost full of leaves since they've been pretty bushy plants on average. Day65 (20.12.) Continuing the last defoliation process. Day66 (21.12.) Continuing the last defoliation process, pretty satisfied with the results so far. Light penetration and airflow have increased greatly so I don't have to worry that much about humidity or possible mold any longer. Each strain has started flowering, all plants are females and buds have started to develop. Defoliating didn't seem to stress the plants as much as I thought it would. Day67 (22.12.) Day68 (23.12.) Refilled and added some nutrients with a stronger Bloom/Grow -ratio (~4:1) and left my girls to enjoy the Christmas Holidays as I did. I'll be gone for around three days, after that I'll change to new fresh nutrients as I mentioned before. One Ayahuasca Purple seems to be ahead of others, and a few other ones have clearly started to develop some buds too, rest of the plants are following closely behind. Each strain has some truly astonishing individuals, and I think Ayahuasca's have shown most variety between different plants. Overall everything looks pretty good I think. Hopefully can say the same after a couple of days as I come back. Happy holidays everyone! Day69 (24.12.) Day70 (25.12.) I added another Led light to my tent just before the lights turned off. Everything looks amazing!
Likes
1
Share
@Filiaes
Follow
23.10 Implemented IPM in form of Amblyseius cucumeris and Amblyseius californicus 25.10 Topped the girls between the fourth and fifth node 27.10 They are doing well after the topping
Likes
410
Share
FOR A NICE DISCOUNT ON ALL MARS HYDRO PRODUCTS. PLEASE VISIT: https://www.mars-hydro.com and use my promo code: Rocknroll This mars hydro 8x8 tent was the easiest tent I ever put together and it's huge and still super easy👍 I only had 1 foot on each side and 1 inch from the ceiling to work with and it still was so easy. It weighs alot but that's because it's made of the thickest material 1680D canvas. Tons of vent holes and ports, enough for whatever you need to put in it🤘. I jumped inside and zipped it all up and there was no light leakage👍 the zippers are strong and sturdy and you can tell that as soon as you touch them. If you have any questions about this tent or other mars hydro tents fell free to ask and I'll help you out. My honest opinion is I'll never use another brand tent after seeing this one🤘🤜🤛 Inside the tent I have my TSW2000 and my new FC4800. The tsw2000 is awesome. If you seen any of my grows you can see the results it produced. But this FC4800 is insane. It's fairly heavy and that's because it's built tough💪. It folds in half so it's easy to move around. I have it daisy chained to the tsw2000 and 1 dimmer controls both lights and that's sweet👍. Not much heat off either light and it only raised my temperature 2°C. If you have any questions about these lights, once again feel free to ask me anything and I will glad to help👍🤘 I got some friends at mars hydro so if anyone needs new equipment I CAN DEFINITELY try to hook you up with some sweet deals.. FOR NOW HERE IS A PLACE YOU CAN LOOK AT EVERYTHING THEY HAVE AT REALLY GOOD PRICES... marshydro_aliexpress Good luck to everyone and thanks for tuning in🤘🥁🎸 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hour customer service.. for everything MARS HYDRO please check out https://www.mars-hydro.com and use my PROMO CODE rocknroll for a nice discount 👍🤜🤛
Likes
36
Share
Really enjoyed growing this plant. The smells and colors are incredible. The size of these nugs are huge! I'm so proud of myself but I also know the genetics were key. Atlas Seeds - WOWZA! Can't wait to taste this delectable fruit. I worked hard for it, working even harder for that first taste. 👽 4 Full OZ of dry weight.