Day 27 flower: I love the Gz strain with a passion. The colours that are beginning to shown on all of their buds are beautiful already and they are not even half way through yet !!. #1 is by far the biggest girl with so many tops going for her final yield weight. #2 is plodding along still in her indica stout kinda way. forming ok too #3 was the tallest of the 4 and had to be supercropped to get the lower buds some light down there. gave 5 mains a 90° bend. #4 is still a little lady but is making nice bud stacks for the party too. They are getting sticky icky now too and smell really fruity when rubbed a little well done Barneys Farm

Here’s my try at lemon pie from Fastbuds, of the 3 beans I got 1 displayed traits of ruderalis is her fan leaves and stretched to 4 ft tall. The bud structure is a little fluffy but smells great and is a good stone. I would cultivate it again and I would recommend a scrog and not to put them too close together.

Harvest day 64 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 16-18 degrees and 55-59% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany

Ich musste den Filter tauschen und etwas gegen den Geruch unternehmen. Die Sorte duftet ordentlich stark. Eine Mischung aus süße und sehr erdigen/ Kieferartigen Gerüchen. Dies ist mein 3. Durchlauf mit dieser Sorte Do Sweet Dos, sie ist manchmal etwas zickig aber bringt gut was an Harz und Geschmack mit.

This week it has a very strong smell and the buds are flowering ridiculously fast I believe it willl take at least to the 10 or 11 week mark due to its size but will def be worth the wait this fastbuds strain(greencrack) is my favorite and I will def be buying again.

Hello growmies 👊💚 the first flowering week is coming to an end, the lemonade haze girls have developed splendidly and the stretch has begun, it smells wonderfully fruity in my grow closet, I could spend the whole day here 😆 I would like to apologize to my friends here because I work 12 hour shifts and I don't have much time for myself. When I find the time I will get back to you and will visit your diaries, thank you for your support and help my friends 🤙☝️ wish everyone a nice weekend good luck with your diaries 💚👊

Día 73 (12/08) Riego 500 ml H2O pH 6,55 Todas las plantas muestras las preflores hembras! (excepto LemonPaya) Día 74 (13/08) Riego 250 ml H2O pH 6,55 . Están muy bien hidratadas Pequeños ajustes de LST Día 75 (14/08) Hoy día de lluvias torrenciales Riego 250 ml H2O pH 6,55 Día 76 (15/08) Detecto mosca blanca en varias plantas. Aplico Spruzit a 10 ml/l ahora que aún no estamos en floración Riego 500 ml H2O pH 6,55 Día 77 (16/08) Riego 500 ml H2O pH 6,55 La mosca blanca ha desaparecido completamente Día 78 (17/08) No riego. Mañana a primera hora aplico Top Dress y riego profundo Va a empezar la floración! Día 79 (18/08) Alimentemos el suelo con Top Dress! 💥 Aplicamos 4 g/L sustrato de Tasty Flowers TD by Lurpe Solutions. Total = 84 gramos / maceta Riego con 1 Litro H2O pH 6,5 con 25 ml/L de Humus de Lombriz Liquido Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Week 15 still white pistils some turn brown cant wait to cut it down Fed ripen for 2 days now

HELLO GROWING FRIENDS - Please look at my Aftermovie Growvideo, which cost me about 4 hours to create. hope you like it! Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 209 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I’m really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I’ve gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I’m incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟

Day 1: Popped. Temp: 75º RH: 82% + PPFD: 250 Day 2: Temp: 75º RH: 82% + PPFD: 250 Day 3: Roots showing through the bottom of the rapid rooter. Dusted roots with Tryfecta Myco Supreme (FoxFarms) and transplanted to 3 gallon pot w/ProMix HP. Temp: 75º RH: 78% + PPFD: 300 Day 4: 5-10ml ph 6.2 water feed. Temp: 75º RH: 75% + PPFD: 300 Day 5: Showing second set of leaves. Temp: 75º RH: 75% PPFD: 300 Day 6: Temp 75º RH: 75% PPFD: 300 Day 7: Temp 75º RH: 72% PPFD: 300 Both + Speed Autos are falling a little behind this first week which I find a little surprising given the name.We'll see how they do in week 2. Will continue to mist spray a few times a day for the next week with maybe one more 5-10ml ph 6.2 water feed.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Plants doing good clones have roots but not all guna wait 2 more weeks b4 transferring to new containers …one plant needs more food guna increase ppm

This is week one for these clones after spending 2 weeks growing roots they have been put into solo cups to start vegetation.

Que pasa familia, vamos con la sexta semana de floración de estas Mandarin Panties feminizadas de Seedstockers. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/21 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 100% de potencia. Tenemos como visitante de nuevo los trips, compré depredadores que colocaré a principios de semana. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco estar 100% con el proyecto. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

I have noticed the two bigger Plants the EC was lower then the recommend and the soil PH was around 7.0. I have this weekend given more Bio grow for just this two plants and PH the water at 5.5 to lower the PH as the Advance silica when in the flex tank the PH goes up very quickly. I have change to only give Advance Silica when top feeding. Flashed one of the plants as PH was 7.6 and EC 2.4 today.

Week 5 it is then. I had hoped on a 4 week veg period as I have been so used to autoflowers that this has become my normal. I had also forgot how much I enjoy training the ladies to work better with the l.e.d coverage and limitations of my grow room height. The HST is goi g really well with the Bruce responding with so.e nice fattening limbs and great potential mainstays. The idea is to fool the plant into thinking that each growing tip is the main-stem ( merristem) This will ensure an even distribution of all the available resources. As they progress towards flowering flip , i am trying to get each tip to the pots edge. This will allow me to tie them down to the edges and when the stretch period begins , they will grow vertically to create a ring of main buds. This allows airflow around each bud, which lessens the risk of mould and also allows lots of available light to reach the whole lengths. I did snap one limb of rhe Bruce bit it was the f.i.m so it won't be a huge loss of it doesn't repair in Time. The candy rain is doing a great job of catching up now with only 4 tips to train and plenty of light, I am hoping she catches up this week to be flipped to flower. Both of the Jealousy girls are really healthy and happy. again they are being trained fairly aggressive and are handling all I am throwing at them with twists and bends. No issues with anything so far so fingers crossed that I can flip them next update and begin the real fun of seeing the training pay off. Be safe and well Growmies. UPDATE 11/5/23 I flipped the lights to 12/12 today so will update in a weeks time on the 1st weeks stretch. Lost the snapped main I repaired on jealousy #1 but no issue as she has plenty of potential mains