Likes
Comments
Share
So here we go steady going into flower ,start to add tiny bit of power buds to help for the flowering time she looks good and healthy cant fault this breeder so far on my 4th strain from them make sure check them over 💪💪
Likes
3
Share
Her aroma is so sweet,all the 5 Black cherry punch have the exact same sweet and floral aroma,her flower are very sticky, she's producing quality resin,she ended up with a smaller size compared to her sisters. Let's see how she performs but I'm loving her so far
Likes
2
Share
@Pxndorx
Follow
Hielo en las raíces. Lavado de raices con agua. 24 hs de oscuridad.
Likes
31
Share
Overall this was a fun grow! It was supposed to be a mini SOG with other 1 gallon autos, but they didn't make it unfortunately, so had to make the best of it! Happy I kept going cause I was extremely happy go grow such a beautiful pheno. By far the deepest purple colours I've ever seen on any plant. Just hope I'll see it again :) .. anyway, not a bad yield for a one gallon grow! 60 grams of bud and another 18 of larf and shake. Time to cure and enjoy 😎
Likes
8
Share
This is the Biggest/Best cannabis plant on GD with a 4 week veg from seed?
Likes
228
Share
📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.
Likes
3
Share
@Ghost17
Follow
Learned a bit this first week. Switched up the set up in the tent a few times and didn't take light adjustment into consideration. Feeling like the plant on the left could stretch a bit more but keeping the light around 24" should so the trick. Also, fed way too heavy the initial feeding switching from CannaStart to A&B. Minor signs of nute burn is coming into play with the tips but I dropped from 800+ PPM down to 5-600PPM 😆🤦‍♂️. Taking notes on each feeding including Ph, PPM and EC so I'm cool with going through some lessons on this first run. Either way I think they're truckin right along! Sitting on Day 12 from seed, I honestly feel like they're crankin! Any comments, questions or suggestions are welcome!
Likes
12
Share
Excellent production!!
Likes
27
Share
~ FASTBUDS TESTER #2205 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/15- Here we go into the second week of veg for the FastBuds Tester #2205 girls and they're on a roll! 😍 When I checked on them today they both were still moist so I let them go until I check them tomorrow. Basically at this point in the run all I have to do is make sure they don't dry out, fill the humidifier and watch them grow! 12/17- Yesterday I watered them both and increased the amount to roughly 0.25g each of de-chlorinated water with 3ml/g of Botanicare Silica Blast (added to begin to help strengthen their branches) and then ph'd to 6.4 @ 74℉. I've also increased the output of the HLG 650R's to 35% which equates to about 230w at the wall which, of course has raised the temp's in the tent so I've also begun to run the A/C unit in the grow room which is keeping the temp's now at 75℉ in the tent. The RH is running around 75-78% RH giving a VPD of .67-.74 which I'll take! 😁👍 Other than what I've mentioned above, all I did was fill the humidifier with distilled water and watched my girls grow! 🤩 12/19- Today I watered them each with 0.25g of de-chlorinated water to which I added 3ml/g Fish Head Farms Fish Sh!t and 1 tsp/g Unsulfured Molasses which I then ph'd to 6.3 @ 74℉. I'm now watering through the bottom, filling the drip pan and letting the plant draw up the water into itself. I am also watering from the top, but only just enough to moisten the medium. They're really starting to take off now, a sure sign their roots are beginning to get well developed. Their 4th set of leaves have emerged and I'm thinking over topping them in the next day or so. 12/21- Well, yesterday I went ahead and topped the #2 Tester #2205 taking off the 5th leaf set. Hopefully she won't stress out over this and starts shooting out those secondary branches. I left the #1 alone as she's not quite as vigorous as the #2. I may not top the #1 as a sort of comparison to see how each grows out. Today I watered them both with 0.25g of straight de-chlorinated water each which was ph'd to 6.3 @ 74℉. I gave about 3/4 of it into their drip pans so they can draw it up into their medium, the rest I applied to the top of their medium just to moisten it. Well there's two weeks of veg behind us now, Week Three of vegetation is beginning and they should really start to take off! 😍👍 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
14
Share
Cawte,dnes 1.12. nam zacina 7.t fotaky a 4.t auta.🙂🌱 .Hnojim kazdu druhu zalievku (kazdy 4den). Teplota 24-26st. Vlhkost 65-67%. No a konečne dostali novú frizuru🤣✂️. Dufam ze sa im to bude pacit a nezmyslia si nahodit z trucu los bananos😁🍌 lebo bude adios amigos sekeros
Processing
Likes
6
Share
Clocks changed to 12/12 . They're Looking Beautiful ⚡️
Likes
6
Share
@Floryx
Follow
-getting really tight now -will install scrog-web to use the space fully -some leafs still have yellow and brown spots -think i will fetilize twice a week from now on -getting a lil cold in the night but therefore humidity is now almost perfect Thankful for any comment :)
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 08/11/2019 - Showing early flower development? 09/11/2019 - Gave her 0.500 ml plain water PH 6.5, she's starting to need more water and also due to 30c temps. She's also showing light green around the leafs maybe slight magnesium deficiency. 10/11/2019 - Yellow leafs showing up really fast so I 'flushed' the medium with 1l of 6.4 PH plain water, watered until some run off start to showing, change the watering plan again, now I only water when the pot feels light and dry at the bottom. 13/11/2019 - Pot was really light and dry at the bottom so I gave her 1.5l of water with 0,75ml of Grow, 1,5ml of Bloom and 0.75ml of Max BioBizz PH 6.5 until some runoff started to appear I think was too much again : also added a work-supplement led strip light. 14/11/2019 - Leaves looking pale raise the light to 45cm instead of the recommended by manufacture 25-40cm.
Likes
6
Share
@Grow4ever
Follow
Blüte geht stetig voran. Wenn das Zelt aufgeht kommt mir ein süßlicher Duft entgegen. Zudem bekommen die Blätter eine tolle Rote Färbung.
Likes
50
Share
🌱 Eternity Grow Cup: Week 2 Veg Report – Building the Foundation 🌟 First, I want to extend a heartfelt thank you to Grow Diaries, this amazing community, and all the sponsors making this journey so special: Aptus Holland, Pro-Mix Soil, TrolMaster, ThinkGrow LED, Future of Grow LED, and CannaKan. And a special shoutout to Zamnesia and Plagron for their incredible support with seeds and nutrients for this run. This wouldn’t be possible without all of you—thank you for inspiring us to put our best into this grow! 💚 Growth Update: Small but Mighty As Week 2 wraps up, the Zamnesia Runtz are still small, but they’re growing beautifully. • Leaf Development: • The first true leaves are now fully visible, and the second pair is starting to emerge on the horizon. Seeing those signs of life and progress fills me with hope and excitement. • Nutrient Introduction: • This week marked the beginning of feeding, laying the foundation for strong, vigorous growth in the weeks ahead. Current Setup • Environment: • Temps are holding at 20°C, with RH at 60%—a comfortable range for young plants. • The heat mat under the pots is maintaining an optimal root-zone temperature, keeping them cozy despite cooler room conditions. • Location: • Still growing alongside their sisters in the 4x8 tent but will soon transition into the full TrolMaster ecosystem, where precision and control will take things to the next level. Nutrient Spotlight: Starting Strong with Aptus Holland I’ve chosen to introduce the Aptus Holland lineup this week. These nutrients are carefully formulated to support plants through every stage of their growth cycle, and here’s what I’m using: 1. Aptus Regulator (0.15ml/L) • What it is: A silicon-based additive that helps plants regulate stress and environmental challenges. • Benefits: • Strengthens cell walls, leading to thicker stems and stronger leaves. • Increases stress tolerance, particularly against heat, cold, and light fluctuations. • Improves nutrient uptake, ensuring plants get the most out of their feedings. • Why now: At this early stage, Regulator gives the plants a strong foundation to handle the cooler temps and build resilience as they grow. 2. RO Water Conditioner (0.8ml/L) • What it is: A product designed to optimize Reverse Osmosis (RO) water, making it suitable for plant feeding. • Benefits: • Balances pH and stabilizes water for nutrient absorption. • Adds essential elements back into the water, ensuring a balanced feed. • Why now: Using conditioned RO water prevents imbalances and provides a clean, consistent base for all feedings. 3. All-in-One Liquid (1.25ml/L) • What it is: A complete macronutrient blend designed for vegging plants. • Benefits: • Provides all essential nutrients (N-P-K) in a balanced ratio. • Easy to use and highly effective, supporting strong vegetative growth. • Why now: As the plants develop their first leaves and roots, All-in-One Liquid ensures they have the building blocks needed to thrive. Educational Focus: Why Start Nutrients in Week 2? 1. Natural Reserves: • During the first week, seeds rely on their own nutrient stores within the seed casing. Introducing nutrients too early can overwhelm or damage delicate roots. 2. Signs of Readiness: • By Week 2, the emergence of true leaves signals that the plants are ready to transition from relying on reserves to taking in nutrients from the medium. 3. Balanced Start: • Starting with low doses ensures the plants can adjust gradually, reducing the risk of nutrient burn or stress. Week 2 Insights: Setting the Stage for Success 1. Managing Environment Challenges: • Lower temps can slow growth, but maintaining a warm root zone with a heat mat has been key to keeping these seedlings healthy and happy. 2. Patience in Veg: • Early veg may feel slow, but this phase is all about establishing strong roots and foundational growth. Remember, every strong plant starts with a strong start. 3. Why Pro-Mix Soil: • This medium provides excellent aeration and drainage, supporting rapid root growth. The added Biofungicide and Mycorrhizae further enhance plant resilience and nutrient uptake. What’s Next? As we move into Week 3, I’m excited to see these beauties continue their journey. The next steps include: • Monitoring the development of new leaves and early structural growth. • Transitioning to the TrolMaster ecosystem, where environmental precision will allow the Runtz to truly shine. • Documenting every moment through photos and videos to share the magic with this amazing community. Community Love & Thanks Thank you to everyone following along and supporting this grow. To all the participants in the Eternity Grow Cup: best of luck—let’s make this one for the history books! Stay tuned for Week 3, where we’ll dive even deeper into the evolution of these incredible plants. Until then, keep growing, keep believing, and let’s create something legendary together! 💚✨ Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚
Likes
1
Share
@Dabcik
Follow
I fiori diventano sempre più compatti e incominciano a sentirsi sempre di più i profumi delle cime Sono riuscito a stabilizzare la temperatura a 24.5 gradi con la lampada al 100% di intensità luminosa a 45cm dalle cime Questa settimana per pulire un po’ il substrato ho dato 2 irrigate a ph 6.4 e circa 100ppm
Likes
17
Share
@BLAZED
Follow
Week 9 (27-3 to 2-4) 27-3 Temperature: 25 degrees (lights on) 18.9 degrees (lights off) Humidity: 63% (highest) 55% (lowest) Added 15L to the reservoir. 28-3 Temperature: 25.1 degrees (lights on) 18.5 degrees (lights off) Humidity: 64% (highest) 56% (lowest) 29-3 Temperature: 27.2 degrees (lights on) 19.4 degrees (lights off) Humidity: 67% (highest) 48% (lowest) As you can see on the pictures, the Chemdog #2 has a flat stem. I dont know how, but the same happened with the grow before this one, but to a Biscotti from a different seed bank. I never seen this before, so i am really surprised to see this happening back to back. Does anyone know if its just coincidence or can lightstress or LST/HST cause this? 30-3 Temperature: 25.3 degrees (lights on) 20.5 degrees (lights off) Humidity: 65% (highest) 54% (lowest) 31-3 Temperature: 25.8 degrees (lights on) 20.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) Today i decided to turn of the reservoir/autopots. I think the plants are overwatered, and because of that probably have light stress and other problems. Also, it can be that i underfeeded them, and that the PH was too high. I turned the light down to 40% strength aswell. 1-4 Temperature: 23.6 degrees (lights on) 20.6 degrees (lights off) Humidity: 62% (highest) 57% (lowest) 2-4 Temperature: 22.6 degrees (lights on) 19.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) No pictures.
Processing
Likes
3
Share
Really happy with the rate of growth. Both plants responded well to training and have bushed out pretty well. Going to let them stretch out from now on. God's Vagina has finally shown she is a female! Both plants are now growing at roughly the same speed.