week 2 Established a nice root system in this clone, all ready for transplant. Used some azos on the roots and some in soil. 7/29- Added 250ppm of epsum salt and 250 ppm of calmag to 1 gal of water. Fed maybe 2 cups to the plant.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

For this grow I've used, For the growth 1 sf1000 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 1 thermostat Heating system for the winter month 11l RQS Fabric Pot and 11l plastic pot. 20 Hours On, 4 hours off light For the soil I've used plagron light mix ont the top + batmix in down pot + rqs pellets. For the blooming 1 Mars Hydro TS1000 (150W) 2 fan 15w Extractor + Filter 150mm 1 HS60 box 1 timer Same pots 20/04 Plagron lightmix + batmix + RQS Pellet After harvest, I've put the stuff in a room with 2 fan 15w, weather are really hot and dry, condition are not well, around 25/32*C and 40%HR, hope will be not dry too fastest. Thanks for all my friends! And again thanks to RQS and @James, and Mars Hydro, @Coco_Pan2022 ❤️❤️❤️

Red everywhere man

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since time change to 12/12 h. Hi everyone . short update on the mini plant :-) it is starting to bloom nicely and i leave it as an experiment :-). There was also 1 g GHSC enhancer per liter. It was poured 2 times with 1 liter this week. Have fun and stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

1.20.2024: Time to gives this a go. 2.3x2.3 tent, XS1500 light, 2 gal fabric pots. Pots filled with FFOF(90%) & Perlite(10%.) Don't ask me why I chose 90/10. Nutrents are the FF Trio. Freebee seed from Humboldt Seed Co(Emerald Fire OG Auto.) Decided to germinate directly into the medium. Light is at 50% power at 2.5ft from the top of the pot(s). I'll have the light running 24hrs until it sprouts(fingers crossed it does.) I sprayed the top soil with pH 6.5 water when i stuck the seeds in then placed clear plastic cups over the seed location. My 4inch fan is on the way and it comes with a monitor for temp and humidity....no idea what current stats are. Just hope the damn thing spouts. Fingers crossed. More to come. 1.24.2024: We've sprouted! 1.25.2024: Took the lil domes off, opened 2/3 vents for some circulation. Been misting the top soil just to keep it moist with 6.5ph water. I also "bottom fed" 12oz of water just to keep things lubricated. On the fence about when to give the plants a proper watering. Might keep things going "as is" for the next two days. Inline fan and associated hygrometer comes tomorrow(1.26) so i'll finally have an idea on what the current stats are in the tent. Will make adjustments at that point in time. Light is 2.5 ft from soil at 50%. 1.26.2024: Inline fan came yesterday. Only set up the probe just to understand temp and humidity. With the light at 50%, 2 ft from the soil, all vents closed except one(1) port at the top, my current temp hovers around 79 and the RH is 50%. After setting up a humidifier, i'm now running 75 degrees, 64% RH and VPD .58. All within tolerance. I can already tell it will be a delicate dance managing heat, exhaust fan speed and humidity. Still haven't given the plant more than 2 cups of water and i'm only watering when the soil is dry. Tomorrow(1.27) marks 1 week since the seed was dropped. Plan is to lightly water the entire pot when dry for the next week or until growth really kicks in.

Comme la semaine dernière, on peut observer une importante refloraison sur une des deux Mazar (la n°2 est plus discrète), et sur l'Afghani#1. Les trichomes ne sont plus ambrés. Patiente donc.... J'ai eu l'impression que la tête principale de la Mazar était en train de moisir. Du coup séchage et fumage ;) Les landraces (Sinaï et Libanaise) continuent leurs floraisons tranquillement 🐫

Hello everyone, I will fill in the description a little later, so much smoked （︶︿︶） ---------- Up 14.10 New season, this time sitting at home, was out of work, thanks Covid 😐 I wish everyone a good mood and health, let's go! 👊 Drop by and leave comments, I will be glad.👇👍

6.1. - Plants are looking very good. First branches are already developing, so I guess I will have to start with LST soon. 8.1. - First branches are shooting out, leaves and plants overall are getting bigger. I hope they'll keep this tempo and health. Watered. 9.1. - Today I've decided to apply some LST and I accidentally snapped off the main stem of one Creamatic. I've fixed it back with tape, but not sure how it will end. 😔 10.1. - I've checked the broken plant and decided to remove that part. Plant already started focusing on the branches that are left, so basically one plant was topped unintentionally ✂️ 11.1. - Week wrap-up: Well, this week was half fail half success. Plants are growing fast and healthy, however I've managed to fuck them up a bit as usual. One accidentally topped plant and one with broken but healing branch. I've decided to give up on the LST of main stems completely. I will let them grow up and just spread the branches with wires. Hope next week will be more successful ✌️ 5.1. - 11.1.2024

Week 8 10-14 Day 50 She looks, smells and grows well! Little studdered on drinking. What else but pics and videos! 10-16 Just water and pictures. Letting her do her thang! Around 500-700ml water a day. 10-19 Some burn, so I ran some runoff, yep burn! 1200 ppm now 400. 😱 Well 2 weeks from here 🤣 or so. 10-20 Nothing changed. .

Sep 21: fall is here with 12 h of darkness and red tinted sunlight both of which help with flowering. One problem with growing dope here is the UV light is weak this far North in the fall so for most people it’s better to just do autos outdoors and timing it so they ripen during the stronger summer sun and you’re done by the end of August. But if you want reliable big yields these fast flowering photoperiods are definitely the best choice. Sep 23: seems a bit off colour so I added some Alaska Fish Fertilizer for N. Always warming the water to about 26C these days to help keep the plant and soil bacteria warm and happy. Sep 25: this plant and Bruce both got blown over twice today. This is because the small 5 gallon bags aren’t big and heavy enough. The plants are fine. Oh well, the advantage is that I can move them around easily to maximize direct sun. Don’t take flash pics of your plants unless you’re going to immediately use a 730 nm far red light to put the plants into dark mode. It’s a great trick as a bloom booster and moves up finishing time here by a couple or three weeks. Sep 27: harvest will be tomorrow because of some bad weather moving in. Tomorrow will be okay but then rain and cold overnight and even snow forecast for late next week. C’est La vie.

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Most of our autoflowering feminized strains are easy to grow. This one, however, is so easy to grow that we had to call it Easy Bud. Easy Bud is very similar to the autoflowering strain White Dwarf. THC: 12% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 30 - 80 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 110 cm Flowering: 5 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: White Indica x Ruderalis Type: Sa 15% In 55% Ru 30% Effect: Physical Climate: Mild —RQS EASY BUD GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, this one with a purple center, let's give her some days in and see what happens next.

Let's go I think just 2 more weeks

RSV11 has been growing great. She got lollipopped today. I also did some hst with a selective defoliation as well. She has been growing strong and dominates the other plants in the room. Everything has been going smooth since the pest issue. Thank you Spider Farmer, and Terpyz mutant Genetics. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Manifold week 4 update. Morning all, Okay lets get the bad stuff out of the way. I think I'm having issues with my soil PH. My Northen Lights x Big Bid Auto has turned a shade of bright green but our girl Blu has some odd colouring in leaves so think the PH of little Blu may be out of wack as well. I've got a new PH meter coming today so I should be able to get a better picture of the problem. I'm hoping it's a minor issue and can be resolved with some neutral watering. Alright on to the manifold. We're up to three nodes :) three more to go. I'm following Nebula Haze's manifold technique so I will need 6 nodes before I top our girl back to the third. So far I don't see any signs of stretching and shes enjoying the new Mars Hydro light. Shes in the tent with her sisters now so loneliness isn't a problem anymore. This week we're going to give a little extra water to flush the soil and start monitoring PH and TDS more closely with my new meters. Still a long way to go. Happy Growing yall.

Day 40 of bloom. The stench is so loud it smells like a juice bar in here! Out of 5 Runtz plants I can already distinguish 4 distinct phenos. Two that smell like pure candy (probably the zkittlez influence), one that smells like earth, mint and baked goods (very reminiscent of thin mint gsc or even dosidos), one that smells like straight cherry coke and one that smells exactly like Gelato 33 (citrusy and fresh)! So yeah, pretty excited.

The last of my skunk regular that germinated. No sign of pre flowers however this is looking like a female based on the speed of her growth being very slow.

Drinking everyday everyone looking good and healthy

It was hard, I did some bullshit when I sprinkled abundant Neem flour on the substratum to hurt the gnats and besides not hurting him very bad I damaged the plant unbalancing her. I informed myself on nutritional imbalances and decided for a 6.0 pH with Flawless Finish containing chelate magnesium and this combination has rebalanced the plant. Every end zero westerly for at least a month and a half but the flowers are very good and full of yield, they are not ingrossed as in full health though. LIGHT >> MARSHYDRO SP3000 AT 90% OF POWER TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com