Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.

Well a few weeks left and they are starting to fall over. Gonna be interesting holding then up for another few weeks. LoL

I really enjoyed watching the ladies grow.i just sprayed again against bugs.but did not see anymore damage by bugs..so ecocure seems to work.one was really infected at so cut some away.the focus is really on the other one.maked her a grid so I can tie the buds when they getting big and hopefully heavy.this is a strong strain. I'm impressed by the way she bounces back from root problems do to wrong container and heat.also bugs.Also broke main stem at top. Started bloom so I give grow and bloom nutritions.cannacure is hopefully preventing molds..

Happy growing✌️

MIMOSA by ROYAL QUEEN SEEDS Week #14 Overall Week #13 Veg This week no real issues to report the sun did get to her a little bit had to move her to a new location other than that she's a strong plant to grow she's one that can take some heat. Stay Growing!!

Bonjour à tous Comme vous pouvez le voir , RAS pour cette semaine , seulement deux gros arrosage , cela fais 4 jours qu'il fait plus ou moins 50 degrés dans la serre mais avec un bon sceau d'eau dans un coin , cela ne leurs poses aucun problème !!! Je suis toujours en près floraisons.... Pour l'instant c'est vraiment léger le passage en floraison Hormis la "Black Domina 0" et oui, le retour... Elle se porte très bien mais étant isolé ailleurs je ne peux pas la prendre en photo entière... Niveau engrais , Peau de banane à tout vas et Marc de café , je tiens à signaler qu'en cette fin de semaine dernière un important arrosage avait était fais avec du fumier de vache , cet engrais est naturel , gratuit et très riche en nutriment !!!! Je pense arrêter de fournir de l'azote pour la semaine prochaine afin de forcé "un peu" le passage en floraison Bon week-end !!!!!!

Gracias al equipo de MSNL y XpertNutrients sin ellos esto no sería posible. 💐🍁 Forbidden Fruit Auto: Forbidden Fruit Autoflower, llamada así por sus deliciosos sabores, es un cruce entre Cherry Pie, Tangie y Siberian Ruderalis. Esta variedad ofrece efectos estimulantes y relajantes con un sabor afrutado, cítrico y a pino. Ideal para quienes buscan un dulce escape. 🚀🌻 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 8: Se aprecian unas lindas preflores hembra, comienzan a estirar los futuros cogollos. Todo sigue su ritmo y ellas comen bien todos los nutrientes, comienzo a aplicar sugarshot, silica force y enzimas.

The stems have become a little too long, but they grow much faster after fertilizing once. I bought a starter kit of Canna Terra fertilizer and will try it out for my grow. In a few days I will top them for the first time, pictures will follow.... I have the little ones in the tent for 12 hours during the day because the light is much better _______________________________________________________________________ I discovered bud rot on my Red Hot Cookies, I first looked to see how far the fungus had penetrated inside the buds. Then I decided to cut the whole headbutt. I checked the entire plant thoroughly and couldn't find anything else. I think it's due to insufficient air flow...I had my fan off for 2 days, my mistake... hope the fungus hasn't spread further.

visual, coming nice visible granules great smell, resistant plant size small stature and probably will arrive soon I intend to go further with it.

Stretching started lets hope my tent can manage.. very vigorous plants!

I was slightly disappointed with the yield but I’m content with the taste and affect that I got from the plant .

Hi everyone 🤗. Everything is going great 👍. There are no defects or anything unusual :-). Today the Blue Cheese Pheno 1 became the first time rinsed, and now only gets 0.4 Ec water for the next 10 days ca :-). Everyone else needs a while. otherwise there is not much to report this week. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱

Topping soon, she stretched nicely and Looks fit. Otherwise she Looks fine, very slim and slender. No rain but Auto watering works fine.

All good. After 2 weeks of 12/12 girls showing nice bloom. I still train and defoliate lightly. After this week I will do stronger defoliation and let them bulk up.

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Week 7

I think they are starting to hermie

Unfortunately I spotted one bud with bud rot on my gelato plant. I flushed it on day 91 of cycle, day 54 of flowering. Today is day 94 and it seems it has not spread out to any other buds(happy days) .. I am watching it closely everyday and also to see how the trichomes are going.. breeder says 65-70 flowering days to be ready.. let’s see.. if I spot another bud rot I will probably harvest it.. I hope that will not happen.. let’s go

Did some defol and a little Lollipoping this week to get light to the lower budsites. The Ethos cookies Rbx are my favorite's so far this run, they stacking up like crazy👌 The Rosso Corsa, so far so good not stacking as nice as the Cookies, but she a verry sweet smelling stinky one, can't wait on this one Gorilla Breath, this is the one i did the most devol/lollipoping on, this little girl was bushy AF. ( excuse my French ) gonna keep a close eye on her this week deu to her Gorilla line-up ( Herm sensitive ) i might have went a bit to hard on her, time will tell. Rock on Growmies 💚

RS11 x Banana OG - Barney's Farm x Doja Day 105 - watered with 2L of RO tap water with nutrients listed above mixed in order, and ph'd to 6.3. I'm not too sure about this one, there were a few issues with her during veg and now that we're more than half way through her flowering cycle, I would have expected her buds to have bulked up a lot more - her pistils have started to show signs of maturity, so I don't expect her to bulk up much more... Maybe it's the genetics, maybe Im just unlucky here, but I have a feeling the yield will be extremely small with this one... Which is a shame, because it smells so good!! She's close to harvest and there is enough room in the tent, so I'll finish her off, but under different circumstances, I would have removed her already and turned her into cannabutter... You win some, you lose some...