I mean, overall this was an extremely painless grow. The test of whether we should or shouldn't top autos is still TBD imo. Our topped candidate produced denser, frostier buds, but weighed slightly less, at 14 grams of bud total. And our lst plant produced 18 grams of bud, not as frosty, and almost as dense as our topped girl. I'll be topping autoflowers from here on out only under the circumstance I have 4+ to grow at the same time. Seems like it could be used to speed up the autoflower grow cycle if done properly, like with right. Since I'm doing a perpetual cycle, it's still a viable option for me in the long run. A few tips I have for anyone growing this strain in organics: Start feeding bloom nutes a little bit prior to flower transition - this makes the transition more seemless. From weeks 1-3 flower, I slowly dropped the grow dosage until I cut off grow nutes week 3 flower. Starting the flush around week 6 flower seemed to really bring out this plant's potential. But I think you could get away with starting the flush around week 5. I hope this helps anyone trying this strain out. It's a good one, I hope to see more journals of it, eventually. Cheers everyone! Time for me to take a well-deserved puff. :) ☁️ 🌼

Well not bad without any care they still end up nice but foxtail ..

3 of the 4 seeds popped. I can see the other one in the rapid rooter but I added another stardawg just to keep things moving. I started with 300 ppm and got the NFT system running and new HLG 260’s at 36” above them turned all the way down.

Update of Goofiez 2 !! It’s incredible this strain is so strong and fast grow !! Stay tu ed

👨‍💚🌴 Grower HageWeed is delighted to introduce his🌴💚👨‍ ⚜️👑🌱 Autumn Cup Contest by Royal Queen Seeds 🌱👑⚜️ 💚🏁✅⚜️🏆🏅Today, 2nd October, I received the Royal Queen Seed package. I was just expecting seeds and a lighter with their nutrients, but instead a roundup of very interesting stuff arrived. Hemp papers, normal, clipper signed royal queen seed, a magazine I can't wait to read, nutrients, stickers, a complete catalog with the new genetics, a Zamnesia booklet, 5 seeds Honey Cream fast flowering, a door joint (which I have photographed several times, I already love it, my walking joint will no longer suffer from the long walks in my pocket waiting to be consumed), grinder, fabric vase that I really like at the sight, and the starter kit for germination. Due to the current lack of space to germinate, I dipped 2 seeds in water, (I started with one but it seemed to suffer from loneliness: D). I can't wait for them to start growing, I'm very excited to be able to participate in a contest. Stay tuned: D 🏅🏆⚜️✅🏁💚 ➡️04/10 Yesterday, examining the packet of seeds carefully, I noticed that one of them seemed split, and so it really was. I put it directly in the jar covering it with plastic wrap hoping it will grow anyway. Should it be born we have 3 honey cream seeds: D On one of the two seeds 2 mm of radicle begin to be seen, the other still shows no sign of opening but we are not in a hurry: D ➡️05/10 Today the root of the second seed has also begun to emerge: D we continue to wait impatiently: D ➡️06/10 Very well, both seeds are coming out well. probably tomorrow they will be put in the jiffy. I have great things in mind for these two seeds: D Come on, grow up !!! ➡️07/10 Today these sweets have lengthened the radicle a little, just enough to win a place inside the jiffy. The broken seed I put in the jar also seems to have taken root, but we'll find out more in the coming days. With one of the two suits I will start a solo cup diary, even if I am out of time for the contest. It will especially help me to better understand how to manage plants in different situations. Well so, Yeah! .➡️08/10 We are already two centimeters away. Even the broken seed seems to want to get out but we wait patiently. Well so, Yeah! ➡️09/10 Today I helped the leaves to free themselves from the seed, as soon as I see some roots, they will be moved to the final pot without too many transplants. Today I also start counting the days. Day 1 from the emergence started. Well so, Yeah! ➡️10/10 Tomorrow the jiffy will be moved to the 11 l pot of royal queen seeds: D can't wait. The one in the jar doesn't seem to have caught, too bad :( the sprout is about 3 centimeters high. Well so, Yeah! ➡️11/10 Today this sweetness has been poured into its final jar, positioned near the rim for a future LST. I added 1l of corrected water to the new pot, away from where I put the seedling. Unfortunately, the broken seed didn't make it. ➡️12/10 Everything is OK. I will try to take 2 photos every day, horizontal and vertical, then I will see the results: D ➡️13/10 Wet with 0.4 of fertilized water vegetative pattern, today is the first 12/12 light day. Well so, Yeah! ➡️14/10 Nothing to report today, Well so, Yeah! ➡️15/10 The humidity gizmo says it's still pretty wet at the bottom, I'll wait to irrigate. Well so, Yeah!

Welcome back guys, This time bigger and different! For this time I'm going back to the basics and i will be using 240 Amnesia Haze clones! I start with the old 3 liter pots and they will be repotted into 7 liters, there was no space to have them in 11 liters in the upcomming weeks. The grow Medium is special lightmix soil from the growshop( it has like ph 5.8-6 with ec 1-1,2 in it). Beneeth the soil i putted Expanded Clay so the water will go out more easily. I have got 12 x 600 watt HID lamps in there, but for now I am just using a few. I'm very busy at the moment so my growroom isn't finished yet. This is only half of it. I had to start because those clones, which i have orderd, where deliverd lol. So there was no time left. The lamps are high at the moment because the clones need time to root. If you have your lamps to low when just planted your clones, your clones will dry out and die. They need to settle first for a few days. Day 7: All went well. I do have a ''bad'' corner. Thoose plants are strugling to develope. Nothing mayor, it is normal with this many plants that some clones doesn't root and grow properly. Next week i will decide which one I keep and which I throw away because I don't like to make two schedules, feeding buckets and more, just for a few weaker plants lol. The lamps are at 60-70cm from the canatopy. Some preff it higher and only at that range when flowering. But I want to have it like this because I want strong stems, more bushy plants instead of weak stems and long ugly anoying plants that produce fluffy buds. These sativas love to stretch and grow big, I personally don't like that, so I try to force strong stem and bush growth. Also increasing a bit in Aptus Regulator might force it as well. I did sprayed them with Canna Cure as well, to prefend against all kinds of stuff and give them a little feeding via the leafs. Currently still to busy in real life. Hopefully I finish my full grow room in the upcomming days, spread the plants and maybe even repot them into bigger ones. The rooting and growing proces goes well. They must go a bit larger untill I force them into flowering. See you guys next week.

1 woche noch ca. +/- 3-4 tage je nachdem wie es ausschaut.... bin mega gespannt... habe vor 2 tagen schon ein kleinen trieb abgeschnitten um es vorab testen zu können und die sieht schon mega aus 😋😋😋👌😉

The plant showed some problem areas on the leaf, and the characteristic red stems appeared on the upper floors of the plant. I began to wonder if this was due to the PH level or not, but I added some PK 13-14 just in case. keeping track of the PH level when growing on soil is very difficult for me. On coco substrate it was easy there are still some problems with the humidity of the tent, because my ventilation with a pc cooler and a charcoal filter mat for the hoods can barely cope with the large vapors of the leaves

01/19/2022 Stretch is starting, watering till 5-10% Runoff. I will be giving some molasses 2 tbls to 2 gallons water to feed the microbial life in my soil. This should help nutrient uptake from roots, feeding her flowers with microbial chelated nutrients. Changing to 12-12 tomorrow at lights on. Which will continue through flowering week 8, week 9- harvest will go to 11-13 for the fantastic finish! Getting rid of the dark green male he is not adjusting to drought (lack of water) as well as lighter green male. Lighter green can go twice as long without water with no sign at wilting

Same as theirs sisters, they looking pretty good and growing nicely. trellis net been added yesterday which I should have done earlier but it’s another lesson for next time. Defoliation is also done and no more will be done till harvest ! Let’s hope those buds get biiiiigger 😍😍 🖖🏼🖖🏼

Вчера приехала база, в пути кремний и стимы.

It’s week 2 already. Week 2 is maybe, maybe, the most important week of the plants life. Time to turn the humidity down based on the temperature your room holds, with as much light as you can create. Now is also the time to introduce co2…as long as your humidity and temperature is right and there’s LOTS OF LIGHT. Co2+light=photosynthesis, and in a perfect world your temp is 78 degrees, humidity 50-55%. These are the only things that matter now. These plants are killing it right now growing visible amounts in just a few days. Every thing was pulled off the plant that is under the netting. While the plants were stretching everything was forced back under the net for the 1st 10 days of flower. Then everything is allowed to grow vertically for the rest of flower. At the end of week 2 is super important. I let the plants dry all the way out. If you think they are dry, wait another day. This is to get as much oxygen to the root zone as possible. Then I flush the plants with 1.0 EC that consists of 50ml/10gal cal mag, 50ml/10gal of sturdy stalk(potassium silicate) and 50ml/10gal of canna pk13/14. Canna pk13/14 is the only non Emerald Harvest product I’ve used in the last 3 years. After the dry out/1.0ec flush of the plants we push the plants with daily 2.0ec feedings until it’s time to flush with fresh water the last week or so of its life. Happy growing and see you next week!

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks All strains except imperium x/blackberry moonrock are topped and the main got LST clip on i snapped a Branch off one of the hyper glue by being to Hasty the other ones where no problem good week for the 9 plants A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Low stress training a few I think there looking ok so far

Average stem height of the big ones are 36 inches, but the mishap past week with the lights might have stressed em a bit and caused some stretching. There was also a humidity issue for a few hours, which could be the culprit for the stretching. Two stems are pushing 40 inches. However, there are no signs of light or heat stress, despite the stems getting within inches of the leds. We shall see... I’m also battling a cold Canadian winter where it hit -42 Celsius today. Plants are in a cold basement in an old house. Had to bring out an extra space heater. Can’t get the temp in my tent above 20. Tent is too packed to introduce a stand up heater. Maybe I’ll convince the plants that fall is coming and they need to bud like crazy.

had to do a long veg and clone a lot whole cos I couldn't flower. glad I had all photoperiod plants and gave me lots of time to work on environmen. flower commenced. let's get it. grrrr