Flowering still going well, no news really.

I over watered 4 out of 5 plants. Plants are bouncing back

📅 Week 8 | 🗓️ Day 50–56 Day 56 – Lemon Cherry Runtz 🍋🍒 (flipped to 12/12 on Day 50) 🔸 She put on some size this week. The canopy is compact and even, with many side branches sitting at the same height. Tape reads ~50 cm. 🔸 Leaves are a rich, healthy green with no spots or burnt tips. I’m still tucking the big fans every day so the lower sites stay lit. 🔸 At ~700 PPFD on 12/12, that’s a DLI ~30 mol/m²/day—right where I want it for the transition/stretch. SANlight 80% @ ~40 cm feels dialed in. 🔸 Looking ahead: in Week 9 I expect the first tufts of pistils on most tops. I’ll do a light defoliation/lollipopping if needed and keep stakes ready. She’s still a touch smaller than Papayton, but she’s catching up nicely in her own tempo. 📈 Current Conditions 🌡️🔆 = 24°C 🌡️🌜 = 19°C 💨 Humidity = 60% 🔦 PPFD = 700 µmol (12/12) 🛠️ Setup (unchanged) 💡 2 x SANlight Evo 4 - 120 ⛺ 120 x120 x 180 Spiderfarmer 🍯 Pots: 18 liter fabric pots 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: BIO Tabs only water method 💧 Water: Tap Water 0,5 EC 🌱 “Easy, organic, only-water method. Save 15% with GDBT420. biotabs.nl/en/shop/”

V4, están creciendo rápido, desde este punto empezaré con una EC de riego más alta 1.5~1.8, hace 3 días que aparecieron las primeras hojas verdaderas, por lo cual la etapa de vegetación ha iniciado. V6, el día anterior tuvieron un riego con pH 6.2 y EC 1.7, se me pasó el agua y quedaron algo tristes, pero ya se recuperaron hoy, todas las stash presentan puntos de decoloración en las primeras hojas, las cookies están en perfecto estado. Están comenzando a salir raíces por el fondo de los vasos(algo que nunca me había pasado con otras genéticas) además se ven muy gruesas las raíces, están pidiendo transplante ya, en unos días serán transplantadas.

J-37 arrosages avec engrais (ph6.8) J-39 arrosages eau (pH 6.8) légère défoliation. J-41 arrosages eau (pH 6.8)

Hello Gromie's, all is well with these girls, continue to fill out & mature. Unfortunately I haven't had any Green planet Massive Bloom to give them this grow as I think it would have made a big difference! 5 days1 into week 5 & showing cloudy trichomes & quite a lot of amber as well, calyxs starting to swell & close up, pistills mostly orange. Think they will definitely finish up quicker than last grow, another week or so I think.👍

my first grow. It was fun . Drying for couple weeks than curing . I’ll post dry weight than . Thanks

Flowering day 42 since time change to 12/12 h . Hey guys :-) A lot happened this week :-). The buds develop really nicely . The scent wafts through the whole room when I open the tent 💚. This week was poured 3 times with 1 l each (nutrients see table above) This week there was the maximum amount of fertilizer, which will be slowly reduced from next week :-) . Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

ciao ragazzi ho fatto i flush a inizio settimana e oggi (circa 10 gg dopo) ho raccolto la pianta sono molto soddisfatta a sviluppato una cima centrale molto grossa e anche tutte le cime secondarie hanno lavorato bene è ricca di tricomi molto appiccicosa con un profumo dolciastro!!! in generale l'esperimento fast Buds è andata benone siamo nell'attesa di scoprire quali varietà rappresenta questa bellissima pianta!!!🌱🌱 💡questo splendido risultato non sarebbe stato possibile senza la mia meravigliosa lampada led Viparspectra XS2000 veramente un ottimo prodotto ve la consiglio se volete dei bei rami forti adatti a sostenere le cime grosse che ottieni!!! this well-known brand offers different solutions look at the official website https://viparspectra.eu/ or Search for it on Amazon: Amazon US: https://amzn.to/30xSTVq Amazon Canada: https://amzn.to/38udUVe Viparspectra UE: bit.ly/ViparspectraUE Viparspectra USA: bit.ly/ViparspectraUS continuate a seguirmi 💪 lasciate un like 👍 maryjane23😛

PS: I need to buy a dehumidifier to keep the humidity level lower. Doubts: I'm still not sure about the amount of water in the irrigation, however the technique I try to keep is 2l of water per plant every two days as it is the time it takes to dry and ask for more water.

This grow was educational. I had major problems not with just germination, but actually getting the seed to grow .... I am majorly pleased and happy over all... Her buds are super dank sticky icky... smells of fuel, citrus, earth, wood... visable THC/ Cannabinoid Crystal's all over her buds... her buds are THICK... MA2 definitely yielded more than MA1! But both plants very similar in "body type" she took longer than MA1, but shes definitely fatter... I can not wait to try this sexy hot mamma....

Inizia la fioritura, porto la luce a 12/12 ed aumento la concentrazione del fertilizzante. La temperatura aumenta leggermente ma resta bassa rispetto alla stagione; l'odore inizia a diventare deciso. - Flowering begins, I increase the nutrient concentration. Daylight 12/12 The temperature increases slightly but remains low compared to the season; the smell starts to be strong.

I did bend her down and she's doing Great! I think i will Mainline her or so it Like i did with the Fastberry. The topping went good. She recovers from the Stress pretty fast and ist doing a grat Job! Looking forward. Stay tuned 🤙🏽

3x3 Clone Tent (Frosted Gelato, G-41, Frozay Pie, Black Cherry Gas) - Organishield foliar IPM and Soil Program watering treatments. Top dressed using BuildAFlower, worm castings, and FF Fruit and Flower top dressing. Week 3 defoliation in flower. Adjusted scrog netting upwards 2-3" for continued plant structure support heading into week 3 flower. Combination of cold weather, low ph, and insufficient levels of mag/cal micronutrients. Gave clones a feeding of FF Beastie Bloomz with Cal/Mag to help with macro/micro nutrients. End of week update - more bud development stacking nicely with leaves beginning to turn a variety of colors mostly reds and purples. Beautiful. 2x4 Tent (Humboldt Seed Blueberry Cupcake/TH Seeds French Macaron) - Organishield foliar IPM and Soil Program watering treatments. Applied new 2x4 AC Infinity netting for scrog plant structure support. BBCC began showing signs of rust on older lower leaves. Combination of cold weather, low ph, and insufficient levels of mag/cal micronutrients. Adjusted ph and feed FF Beastie Bloomz with Cal/Mag. End of week update - BBCC recovering nicely after treatment and nutrient feeding. Continue to take advantage of flower stretch by fanning out growth filling in empty areas of the scrog netting. 2x2 Tent (Afgooey Autos) - first application of Organishield foliar IPM and Soil Program watering treatments. Need 2-3 more days before transplant into final three gallon grow bags. Cuttings are in day 12 using peat pellets. No visible sign of rooting yet. 2x2 UPDATE: Transplanted three Afgooey Autos into 3 gallon fabric bags with FF Happy Frog, Light Warrior, and Natures Living Soil for autos and Mykos for roots. Two days later, the plants are thriving. Day 13 and cuttings beginning to show first signs of root development in peat pellets. Continue to mist and monitor for next two days before transplanting into dixie cups. End of week update - WE HAVE ROOTS. Continued vibrant growth of transplanted autos. Because of space restrictions and volume of combined grows, I will top autos in the next few days. Not normally recommended, but I have topped autos previously and if done early enough the females should recover fully prior to flowering.

Greetings, fellow growers! Welcome back to another exciting update on the journey of our beloved P.C.R.s. Week 4 of veg has been nothing short of spectacular, and I'm thrilled to share all the juicy details with you. After the successful transplant into their final homes, our girls are thriving like never before. The transition was seamless, thanks to careful preparation and attention to detail. I made sure to clean up our 3x3 tent thoroughly, leaving no corner untouched. LED lights, fans, and all equipment received a deep cleanse to ensure a pristine environment for our precious plants. Now, let's talk numbers. The TDS levels are holding steady at 470, indicating a perfect balance of nutrients for optimal growth. pH levels are sitting comfortably at 5.8, while the temperature remains a cozy 19 degrees Celsius for watering. These ideal conditions provide the perfect foundation for our PCRs to flourish. Speaking of lighting, let's delve into the ViparSpectra P2000—a true gem in our grow arsenal. This LED grow light is a game-changer, providing the perfect spectrum of light for every stage of plant growth. From vegetative to flowering, the ViparSpectra P2000 delivers consistent, high-quality light that promotes healthy development and robust yields. But the benefits don't stop there. The ViparSpectra P2000 is also incredibly energy-efficient, ensuring maximum output with minimal energy consumption. Plus, its compact design makes it the perfect fit for our 3x3 tent, delivering uniform coverage without any hot spots or shadowing. Now, let's circle back to the importance of cleanliness in the grow room. A thorough clean-up not only promotes better plant health but also helps prevent pests, diseases, and other potential problems down the line. By starting with a clean slate, we set ourselves up for success and pave the way for a bountiful harvest. In conclusion, Week 4 of veg has been a triumph on all fronts. Our PCRs are thriving, our grow environment is pristine, and our ViparSpectra P2000 is lighting the way to greatness. With each passing day, I'm more excited than ever to see what the future holds for our green beauties. Until next time, happy growing, and may your harvests be plentiful! Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Growers love to you all

5 week

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

Hello my friends! I have some good news and bad news this week, [Bad News]First I'll mention that all, yes all of my Purple Urkle's had to go 😰 I was on the phone with a good friend of mine while admiring my garden of green and I spy with my little eyes 😶 a pollen pod containing nanas. So as hard as it was to cut em down, I knew they had to go. I’m honestly relieved to have those time bombs removed from my tent, that’s all I needed was seeded product. I won’t let this discourage me, in fact I’m empowered knowing that I averted this potential crisis :) I’ll still keep me eye out just in case, you never know. [Good News] The other remaining strains, White Widow, Super Silver Haze, CBD Blueberry, & Mazar are doing well. Since I feed them light nutes last time I’m debating if I should feed them a 2nd time, or just use some good ol ph’d tap? They look so good I don’t want to over feed em, then again I want the girls to have plenty of nutrients to avoid potential deficiencies. The CBD was the first to flower, though it’s kind of been flowering on and off for a while. If these results happen with the other CBD seeds I’d probably avoid purchasing this product again, I’m not happy with the mutations that are going on with this plant (this is technically bad news). Back to the point I see signs of flowering in all the girls now! This is where it gets exciting, so pumped for this phase, I’ve waited 78+ days for this! I think that’s enough rambling, I’ll get right into the Individual Progress Notes, enjoy :) ~ Individual Progress Notes ~ [CBD] Height: 24.8” Tops: 8 Notes: This one is about 1 - 2 weeks ahead of the others, which are just showing their “hairs” now. I’m on the fence, I’m not sure how this CBD is going to be as a finished product. I hope the other seeds I have don’t have the same mutations... I haven’t had any contact from GCS since their reply. I’ll still write them a report when this girl is harvested, that would probably be better in the long run so they have more information about these mutations I’m experiencing. [Mazar] Height: 22.3” Tops: 16 Notes: I’ll just say she looked like a perfect orb when I removed the trellis netting to realign the family. A very even growth rate, with a consistent distance between nodes, beautiful. The genetics for Mazar here is amazing, now I can’t say this for sure but for now her growth and shape is fantastic and beyond my expectations. [Super Silver Haze] Height: 22.5” Tops: 16 Notes: Talk about sudden growth! This beastie was one of my smallest girls and just like my friend here on GD called it, she shot up! She also has the biggest fan leaves (not the most fingers). Now that she has more room to spread out and breath I’m sure she’ll grow even more. [White Widow] Height: 23.3” Tops: 16 Notes: Tanya here is growing so well, very happy. Her leaves still have that blue steel, green look. I love it! Other than the mazar she has the 2nd most bud sites. Soon, very soon we’ll see flowers starting to develop. I noticed some possible nute burn/deficiencies with a couple of her fans so I’ll use ph’d water next feeding to see if the condition stabilizes, I’ll know by then. ~ Final Thoughts ~ It’s been a long run so far my friends. I can’t say everything has gone as planned, but I avoided a huge blow to my product by noticing the pollen pods developing on the Purple Urkle females. This transition has gone well so far, no shock or hardcore deficiencies. Again, thank you all for your kind words and support! Much love, Meus